LifePro LP-HYDLFPK-OCN

Lifepro HydroLife Peak Hydrogen Water Bottle Generator 9.5oz User Manual

Model: LP-HYDLFPK-OCN | Brand: LifePro

Ọrọ Iṣaaju

Thank you for choosing the Lifepro HydroLife Peak Hydrogen Water Bottle Generator. This portable device utilizes advanced SPE/PEM technology to enrich your drinking water with up to 8000ppb of hydrogen, supporting your daily hydration and active lifestyle. This manual provides essential information for the safe and effective use of your new hydrogen water bottle.

Lifepro HydroLife Peak Hydrogen Water Bottle, front view.

Image: Lifepro HydroLife Peak Hydrogen Water Bottle, front view.

Ọja Pariview

The HydroLife Peak is engineered for performance and convenience, featuring a robust design and user-friendly interface.

  • Ìfojúsùn Haidrojin Gíga: Utilizes platinum-coated titanium plates and a proton exchange membrane (SPE/PEM) to produce water with up to 8000ppb hydrogen.
  • Ifihan OLED: Provides real-time information on hydrogen levels and cycle duration.
  • Gbigbe & Gbigba agbara: Equipped with a 2000mAh battery and USB-C charging for use anywhere.
  • Ikole ti o tọ: Made from aviation aluminum and food-grade polycarbonate for lightweight, leak-resistant daily use.
  • Iṣiṣẹ Rọrun: Single-button control for 5-minute or 10-minute hydrogen generation cycles.
Bugbamu view diagram of the Lifepro HydroLife Peak Hydrogen Water Bottle showing its components: leakproof design, food-grade polycarbonate, USB-C rechargeable base, and aviation-grade aluminum.

Aworan: Exploded view of the HydroLife Peak components.

Ṣeto

  1. Ayẹwo akọkọ: Upon receiving your HydroLife Peak, you may notice some water inside. This is normal as the generator is shipped pre-hydrated to protect its components and ensure optimal performance.
  2. Lifepro HydroLife Peak Hydrogen Water Bottle in its packaging, showing it arrives pre-hydrated.

    Image: Product arriving pre-hydrated for convenience.

  3. Gbigba agbara: Before first use, fully charge the device using the provided USB-C charging cable. The OLED display will indicate charging status.
  4. Apejọ: Ensure the bottle is securely screwed onto the base. The leak-resistant design requires a firm connection.

Awọn ilana Iṣiṣẹ

Follow these steps to generate hydrogen-rich water:

  1. Fill the Bottle: Unscrew the top lid and fill the bottle with potable water, leaving about an inch of space from the top. The HydroLife Peak is compatible with filtered and bottled water.
  2. Yan Yiyika: Press the power button on the base to initiate a hydrogen generation cycle. A single press typically starts a 5-minute cycle, while a double press may activate a 10-minute cycle (refer to specific model instructions for exact button functions). The OLED display will show the remaining time and hydrogen concentration (PPM).
  3. A hand pressing the power button on the Lifepro HydroLife Peak Hydrogen Water Bottle to start the hydrogen generation process.

    Image: Pressing the power button to start hydrogen generation.

  4. Gbadun: Once the cycle is complete, the device will automatically shut off. Drink the hydrogen-rich water promptly for best results.

Official ọja Video

Video: Demonstrating the features and benefits of the Lifepro HydroLife Peak Hydrogen Water Bottle, including its ease of use and portability.

Itoju

Proper care ensures the longevity and performance of your HydroLife Peak.

  • Fi omi ṣan lojoojumọ: After each use, rinse the bottle and lid with clean water. The wide mouth design facilitates easy cleaning.
  • Oṣooṣu Jin mimọ: For a thorough cleaning, disassemble the bottle and wash all parts (except the electronic base) with mild soap and water. Ensure all components are completely dry before reassembly.
  • Electrolyzer Care: The electrolyzer should not be left dry for extended periods. If not used for a long time, ensure it is kept moist.
A person cleaning the wide-mouth design of the Lifepro HydroLife Peak Hydrogen Water Bottle.

Image: Cleaning the HydroLife Peak Hydrogen Water Bottle.

Laasigbotitusita

IsoroOwun to le FaOjutu
Ẹrọ ko tan.Batiri kekere.Gba agbara si ẹrọ naa nipa lilo okun USB-C.
No hydrogen bubbles generated.Insufficient water or improper assembly.Ensure water level is adequate and the bottle is securely attached to the base.
Omi jijo.Lid or bottle not properly sealed.Tighten the lid and ensure the bottle is correctly screwed onto the base. Check gaskets for damage.
Ifihan OLED ko ṣiṣẹ.Device off or battery low.Press the power button to activate. Charge the device if the battery is low.

Awọn pato

  • Brand: LifePro
  • Orukọ awoṣe: Hydrolife Peak
  • Nọmba Awoṣe Nkan: LP-HYDLFPK-OCN
  • Agbara: 280 Milliliters (9.5oz)
  • Awọn iwọn ọja: 2.4"L x 2.4"W x 8.2"H
  • Ìwọ̀n Nkan: 12.3 iwon (0.77 iwon)
  • Ohun elo: Polycarbonate, Aviation Aluminum
  • Orisun Agbara: Agbara Batiri (2000mAh)
  • Ọna ìwẹnumọ: Hydrogen Electrolysis (SPE/PEM Technology)
  • Ipele TDS Omi Atilẹyin O pọju: 600 PPM
  • Ẹya Pataki: Gbigbe
  • Awọn eroja to wa: Hydrogen Water Bottle, USB-C Charging Cable
Lifepro HydroLife Peak Hydrogen Water Bottle with dimensions (8.19 inches height, 2.36 inches width) and 280ml capacity.

Image: Dimensions and capacity of the HydroLife Peak.

Atilẹyin ọja ati Support

For warranty information, product registration, or technical support, please refer to the official LifePro webojula tabi kan si wọn onibara iṣẹ taara. Tọju iwe-ẹri rira fun eyikeyi awọn ibeere atilẹyin ọja.

O le ṣàbẹwò awọn LifePro itaja lori Amazon fun afikun alaye ọja ati awọn orisun atilẹyin.

Awọn iwe aṣẹ ti o jọmọ - LP-HYDLFPK-OCN

Ṣaajuview Lifepro TrimLite Vibration Plate Afọwọṣe
Iwe afọwọkọ olumulo pipe fun Lifepro TrimLite Vibration Plate, iṣeto ibora, iṣẹ ṣiṣe, awọn anfani, awọn ilana aabo, ati laasigbotitusita fun ẹrọ gbigbọn gbogbo-ara yii.
Ṣaajuview Lifepro Turbo 3D Vibration Plate User Afowoyi: Ṣetan, Ṣeto, Pro
Iwe afọwọkọ olumulo yii n pese awọn itọnisọna okeerẹ fun Lifepro Turbo 3D Vibration Plate, iṣeto ibora, iṣẹ ṣiṣe, awọn itọnisọna ailewu, ati awọn ilana adaṣe. Ṣe afẹri bii o ṣe le mu amọdaju dara, imularada, ati alafia pẹlu imọ-ẹrọ gbigbọn ilọsiwaju ti Lifepro.
Ṣaajuview Lifepro Rumblex Plus Afọwọṣe Olumulo Awo Gbigbọn 4D: Awọn ẹya, Iṣẹ, ati Aabo
Comprehensive user manual for the Lifepro Rumblex Plus 4D Vibration Plate. Learn about setup, operation, safety precautions, troubleshooting, and exercises for this advanced whole-body vibration machine.
Ṣaajuview Lifepro VibraCare Plus Foot Massager User Manual
Comprehensive user manual for the Lifepro VibraCare Plus Foot Massager, detailing setup, operation, features, safety instructions, and troubleshooting for optimal pain relief and wellness.
Ṣaajuview Lifepro WaverMini Vibration Plate User Afowoyi
Iwe afọwọkọ olumulo fun Lifepro WaverMini Vibration Plate, iṣeto alaye, iṣẹ ṣiṣe, awọn anfani, ailewu, ati awọn pato fun imudara amọdaju ile ati imularada.
Ṣaajuview Lifepro RejuvaWrap Infurarẹẹdi Sauna Afọwọkọ olumulo ibora - Awọn anfani, Eto, ati Aabo
Iwe afọwọkọ olumulo pipe fun Lifepro RejuvaWrap Infurarẹẹdi Sauna Blanket. Kọ ẹkọ nipa awọn anfani rẹ, awọn ilana iṣeto, awọn ilana ṣiṣe, awọn itọnisọna ailewu, laasigbotitusita, ati awọn pato ọja.