Kismile Electric Kettle User Manual

Ọja Pariview

The Kismile Electric Kettle (Model KT6718S-NEW) is a 1.7-liter, 1500W stainless steel water boiler designed for efficient and precise heating. It features a capacity indicator, 7 adjustable temperature settings, a 2-hour keep warm function, and automatic shut-off for safety. This kettle is suitable for preparing various hot beverages like coffee and tea.

Image: The Kismile Electric Kettle, a 1.7L stainless steel appliance, displayed on a kitchen countertop.

Awọn iṣọra Aabo

• Always ensure the kettle is placed on a stable, flat, and heat-resistant surface.
• Do not immerse the kettle base or power cord in water or other liquids.
• Keep the kettle out of reach of children and pets.
• Do not operate the kettle if it is empty (boil-dry protection is included, but it's best to avoid).
• Yọọ ikoko kuro lati inu iṣan agbara nigbati ko si ni lilo ati ṣaaju ṣiṣe mimọ.
• Avoid touching hot surfaces. Use the handle.

Ṣeto

1. Yọọ kuro: Fi ìṣọ́ra yọ gbogbo ohun èlò ìdìpọ̀ kúrò kí o sì ṣàyẹ̀wò ìkòkò náà fún ìbàjẹ́ èyíkéyìí.
2. Mọ: Before first use, fill the kettle with water to the maximum level, boil it, and then discard the water. Repeat this process twice to ensure cleanliness.
3. Ibi: Place the power base on a dry, flat, and stable surface near a 120V power outlet.

Awọn ilana Iṣiṣẹ

Àgbáye Kettle

• Press the one-button lid release to open the lid.
• Fill the kettle with fresh water, ensuring the water level is between the 'MIN' (0.5L) and 'MAX' (1.7L) marks on the water level window.
• Pa ideri naa ni aabo.

Aworan: A alaye view of the kettle's water level window and the control knob, showing the minimum and maximum fill lines.

Bawo ni lati Sise Omi

1. Plug the kettle into a 120V outlet. The kettle will beep once, and the display will show 212°F (100°C) flashing for 2 seconds, then display the current water temperature.
2. Lightly touch the power button. The kettle will begin heating to a boil.
3. It will turn off automatically with a beep once boiling is complete. The display will show "OFF" after 30 seconds of inactivity.

Image: The kettle actively boiling water, highlighting its 1.7L capacity and fast boiling capability.

Adjusting Temperature and Keep Warm Function

1. Lightly touch the power button for 3-5 seconds. The keep warm symbol will appear on the display.
2. Turn the knob to select one of the preset temperatures (104°F-194°F, 40°C-90°C). The water will maintain the selected temperature for 2 hours.
3. To cancel the Keep Warm function, touch the power button for 3-5 seconds (you will hear 3 beeps) or remove the kettle from its base.

Image: A hand adjusting the temperature control knob on the kettle's base, illustrating the 360° cordless design.

°F/C Iyipada

You can change the temperature units from Fahrenheit (°F) to Celsius (°C) or vice versa by pressing and holding the knob for approximately 5-8 seconds. The unit symbol on the display will change.

Image: The kettle displaying a temperature, with a visual guide for optimal temperatures for different drinks like infant formula, green tea, coffee, and black tea.

Itoju

Ninu Kettle

• Yọọ kuro nigbagbogbo ki o jẹ ki o tutu patapata ki o to sọ di mimọ.
• Mu ese ita ti igbona pẹlu asọ, damp asọ. Ma ṣe lo awọn afọmọ abrasive tabi awọn paadi iyẹfun.
• To clean the interior, fill the kettle with a mixture of water and white vinegar (1:1 ratio) and let it sit for an hour, or boil the mixture for 5 minutes. Rinse thoroughly with fresh water afterward.
• Maṣe fi ipilẹ agbara sinu omi.

Laasigbotitusita

Kettle Not Turning On or Unresponsive Power Button

• Ṣayẹwo Asopọ agbara: Ensure the kettle is properly seated on its power base and the base is securely plugged into a working 120V outlet.
• Fọwọkan Ifamọ: The power button is a touch-sensitive control. Apply a light, firm tap rather than pressing hard. If it remains unresponsive, try tapping it once, then holding your finger on it for 2 seconds, and then tapping again.
• Tun: Unplug the kettle from the wall outlet for a few minutes, then plug it back in and try again.

Omi Ko Alapapo

• Ipele Omi: Ensure there is sufficient water in the kettle, above the 'MIN' mark.
• Idaabobo Sise-Gbẹ: If the kettle was operated empty, the boil-dry protection may have activated. Allow the kettle to cool down completely before refilling and attempting to boil again.

Awọn pato

Atilẹyin ọja ati Support

For warranty information or product support, please refer to the documentation included with your purchase or contact Kismile customer service directly. Keep your purchase receipt for warranty claims.