1. Awọn Ilana Aabo pataki
Nigbati o ba nlo awọn ohun elo itanna, awọn iṣọra aabo ipilẹ yẹ ki o tẹle nigbagbogbo lati dinku eewu ina, mọnamọna, ati/tabi ipalara si eniyan, pẹlu atẹle naa:
- Ka gbogbo ilana.
- Maṣe fi ọwọ kan awọn aaye ti o gbona. Lo awọn ọwọ tabi awọn koko.
- Lati daabobo lodi si ina, mọnamọna, ati ipalara si awọn eniyan, maṣe fi okun, plugs, tabi ohun elo bọ inu omi tabi omi miiran.
- Abojuto sunmọ jẹ pataki nigbati eyikeyi ohun elo ba lo nipasẹ tabi sunmọ awọn ọmọde.
- Yọọ kuro lati inu iṣan nigbati ko si ni lilo ati ṣaaju ṣiṣe mimọ. Gba laaye lati tutu ṣaaju fifi sii tabi mu awọn ẹya kuro, ati ṣaaju ki o to nu ohun elo naa.
- Ma ṣe ṣiṣẹ ohun elo eyikeyi pẹlu okun ti o bajẹ tabi pulọọgi tabi lẹhin aiṣe ohun elo, tabi ti bajẹ ni eyikeyi ọna. Pada ohun elo pada si ile-iṣẹ iṣẹ ti a fun ni aṣẹ fun idanwo, atunṣe, tabi atunṣe.
- Lilo awọn asomọ ẹya ẹrọ ti a ko ṣeduro nipasẹ olupese ohun elo le ja si ina, mọnamọna, tabi ipalara si awọn eniyan.
- Maṣe lo ni ita.
- Ma ṣe jẹ ki okun duro lori eti tabili tabi counter, tabi fi ọwọ kan awọn aaye ti o gbona.
- Ma ṣe gbe sori tabi sunmọ gaasi ti o gbona tabi ina ina, tabi ni adiro ti o gbona.
- Nigbagbogbo so plug to ohun elo akọkọ, ki o si pulọọgi okun sinu ogiri iṣan. Lati ge asopọ, tan eyikeyi iṣakoso si “pa”, lẹhinna yọ plug kuro ni iṣan ogiri.
- Ma ṣe lo ohun elo fun miiran ju lilo ti a pinnu lọ.
- Gbigbọn le waye ti a ba yọ ideri kuro lakoko awọn iyipo Pipọnti.
- A ṣe apẹrẹ carafe fun lilo pẹlu ohun elo yii nikan. Ko gbọdọ ṣee lo lori oke ibiti o wa.
- Ma ṣe gbe carafe ti o gbona si oju tutu tabi tutu.
- Maṣe lo carafe ti o ya tabi carafe ti o ni ọwọ alaimuṣinṣin tabi alailagbara.
- Ma ṣe sọ carfe mọ pẹlu awọn afọmọ, awọn paadi irun -irin, tabi ohun elo abrasive miiran.
2. Ọja irinše
The Gevi 10-Cup Grind & Brew Coffee Maker includes the following components:
- 1 x Drip Coffee Maker (Main Unit)
- 1 x Glass Coffee Pot (Carafe)
- 1 x Scoop
- 1 x Permanent Filter
- 1 x Filter Ring
- 1 x Removable Filter Holder
- 1 x Afowoyi
Figure 2.1: Included components of the Gevi 10-Cup Grind & Brew Coffee Maker.
3. Eto
3.1 Ni ibẹrẹ Cleaning
Before first use, wash all removable parts (glass carafe, scoop, permanent filter, filter ring, removable filter holder, and water tank) in warm, soapy water. Rinse thoroughly and dry. Wipe the exterior of the coffee maker with a soft, damp asọ.
3.2 Apejọ
- Install the Filter Holder: Open the swing-out filter basket. Place the removable filter holder into its designated slot.
- Insert Permanent Filter: Place the permanent filter into the removable filter holder.
- Add Filter Ring: Place the filter ring on top of the permanent filter.
- Ipo Carafe: Fi ago gilasi ti o ṣofo sori awo gbigbona naa.
- Kun Omi Omi: Open the water tank lid. Fill the removable water tank with clean, room-temperature water up to the desired cup mark (e.g., MAX 10). Ensure the water level matches the amount of coffee you intend to brew.
- Close Water Tank: Ti ideri ojò omi naa lailewu.
Figure 3.1: Removable and visible water tank.
Figure 3.2: Adding water to the tank.
Video 3.1: Step-by-step guide on how to set up the Gevi 10-Cup Grind & Brew Coffee Maker.
4. Awọn ilana Iṣiṣẹ
4.1 Making Coffee with Whole Beans
- Ṣetan Ẹrọ naa: Ensure the filter holder, permanent filter, filter ring, and carafe are correctly in place, and the water tank is filled to the desired level.
- Fi awọn ewa kofi kun: Open the bean hopper lid and add whole coffee beans using the provided scoop. Close the bean hopper lid.
- Ṣatunṣe Ipele Lilọ: Rotate the grind regulator on the bean hopper to select your preferred grind size (finer or coarser).
- Agbara Tan: Plug in the coffee maker and press the TAN/PA bọtini lati tan-an.
- Yan Iwọn Cup: Tẹ awọn IGBA IGBA button to select the desired number of cups (4-10).
- Choose Brewing Style: Tẹ awọn Ilana button to cycle through the available brewing styles: CLASSIC, INTENSE, RICH, or ICE.
- Bẹrẹ Pipọnti: Tẹ awọn TAN/PA button again to start the grinding and brewing process. The machine will automatically grind the beans and then brew the coffee.
- Jeki Iṣiṣẹ Gbona: After brewing, the warming plate will automatically keep the coffee hot for up to 4 hours (60-240 minutes, adjustable via touchscreen).
Figure 4.1: Adding whole beans or ground coffee.
Video 4.1: Instructions on how to make coffee using whole beans with the Gevi 10-Cup Grind & Brew Coffee Maker.
Video 4.2: Guide to setting the powder amount and strength for brewing.
4.2 Making Coffee with Ground Coffee
- Ṣetan Ẹrọ naa: Ensure the filter holder, permanent filter, filter ring, and carafe are correctly in place, and the water tank is filled to the desired level.
- Ṣafikun Kofi Ilẹ: Add your desired amount of pre-ground coffee into the permanent filter.
- Disable Grinding: Tẹ awọn Ilọ PA button to ensure the grinder does not activate.
- Agbara Tan: Plug in the coffee maker and press the TAN/PA bọtini lati tan-an.
- Yan Iwọn Cup: Tẹ awọn IGBA IGBA button to select the desired number of cups (4-10).
- Choose Brewing Style: Tẹ awọn Ilana button to cycle through the available brewing styles: CLASSIC, INTENSE, RICH, or ICE.
- Bẹrẹ Pipọnti: Tẹ awọn TAN/PA button again to start the brewing process.
- Jeki Iṣiṣẹ Gbona: After brewing, the warming plate will automatically keep the coffee hot for up to 4 hours (60-240 minutes, adjustable via touchscreen).
Video 4.3: Instructions on how to make coffee using pre-ground coffee with the Gevi 10-Cup Grind & Brew Coffee Maker.
4.3 Programmable Brewing (Delay Brew)
The coffee maker features a 24-hour programmable timer, allowing you to set a delay brew for fresh coffee at a specific time.
- Ṣeto Akoko lọwọlọwọ: With the machine plugged in and powered on, use the WAKATI ati MIN awọn bọtini lati ṣeto awọn ti isiyi akoko.
- Murasilẹ fun Pipọnti: Follow steps 1-6 from either "Making Coffee with Whole Beans" or "Making Coffee with Ground Coffee" sections.
- Ṣeto Akoko Idaduro: Tẹ awọn DÁJÚRẸ̀ FÚN button. The display will show "PM" or "AM" and the time will flash. Use the WAKATI ati MIN buttons to set your desired brew start time.
- Activate Delay Brew: Tẹ awọn DÁJÚRẸ̀ FÚN button again to confirm. The delay brew indicator will light up, and the machine will start brewing at the set time.
Figure 4.2: Setting the 24-hour programmable timer for delay brew.
Video 4.4: Guide on how to set the delay brew function.
Video 4.5: Instructions for scheduling brewing time on the Gevi coffee maker.
5. Itọju
5.1 Daily Cleaning
- Yọọ: Yọọ alagidi kọfi nigbagbogbo ṣaaju ṣiṣe mimọ.
- Clean Carafe: Wash the glass carafe, permanent filter, filter ring, and removable filter holder in warm, soapy water. Rinse thoroughly and dry. These parts are not dishwasher safe.
- Pa Ode nu: Wipe the exterior surfaces of the coffee maker, including the warming plate, with a soft, damp asọ. Ma ṣe lo awọn afọmọ abrasive tabi awọn paadi iyẹfun.
5.2 Nipasẹ
Mineral deposits (limescale) can build up in your coffee maker over time, affecting performance and coffee taste. Descale your machine regularly (e.g., every 2-3 months, or more often if you have hard water).
- Mura Solusan Descaling: Fill the water tank with a mixture of white vinegar and water (e.g., 1:2 ratio) or a commercial descaling solution according to product instructions.
- Bẹ̀rẹ̀ Ìyípo Ìmọ́tótó: Yan awọn MỌ mode on the touchscreen. Press the TAN/PA button to start the cleaning process. The machine will run a cycle to flush the internal water lines.
- Awọn Yiyi Fi omi ṣan: After the descaling cycle is complete, empty the carafe. Fill the water tank with fresh, clean water and run 2-3 full brewing cycles (without coffee) to rinse out any remaining descaling solution.
Video 5.1: Detailed instructions on how to descale the Gevi 10-Cup Drip Coffee Maker.
5.3 Cleaning the Bean Hopper
The bean hopper is removable for easy cleaning. Regularly remove any residual coffee beans or grounds to prevent clogging and maintain optimal grinding performance.
Figure 5.2: Removable bean hopper for easy cleaning.
6. Laasigbotitusita
| Isoro | Owun to le Fa | Ojutu |
|---|---|---|
| Kọfí kò ń pọn. | No water in tank; machine not plugged in; delay brew set. | Fill water tank; ensure power connection; check delay brew settings. |
| Kofi alailera. | Insufficient coffee grounds; coarse grind setting; incorrect brewing style. | Add more coffee; select finer grind; choose a stronger brewing style (e.g., Intense, Rich). |
| Grinder ko ṣiṣẹ. | Bean hopper empty; grind off selected; bean hopper not locked. | Fill bean hopper; ensure GRIND OFF is not selected; ensure bean hopper is locked in place. |
| Kofi àkúnwọ́sílẹ̀. | Too much water; filter basket clogged. | Do not overfill water tank; clean filter basket and ensure proper placement. |
| Iboju ifọwọkan ko dahun. | Temporary software glitch; power issue. | Unplug the machine for 30 seconds, then plug back in. If issue persists, contact customer support. |
7. Awọn pato
- Brand: gevi
- Orukọ awoṣe: Drip Coffee Machine (DCMF0-BK0A1)
- Àwọ̀: Dudu
- Awọn iwọn ọja: 10.7"D x 7.9"W x 17.8"H
- Ìwọ̀n Nkan: 4.7 iwon
- Irisi Ẹlẹda Kofi: Drip Kofi ẹrọ
- Ipo isẹ: Ni kikun Aifọwọyi
- Voltage: 120 Volts
- Iru Iṣwọle Kofi: Ẹ̀wà gbogbo
- Se Ailewu Apoti: No (for most components)
- Ẹya Pataki: Programmable, Built-in Burr Grinder, Touch Screen, 4-Hour Keep Warm
Figure 7.1: Product dimensions of the Gevi 10-Cup Grind & Brew Coffee Maker.
8. Atilẹyin ọja ati Support
Every Gevi product (purchased through official or authorized channels) includes a 12-month warranty and lifetime technical support.
If you encounter any problems when using your Gevi coffee machine, please feel free to contact us for assistance.
- Akoko atilẹyin ọja: 12 osu
- Atilẹyin: Igbesi aye Imọ Support
