Polibi Queen Size Platform Bed with Curved Headboard, 2 Drawers, and Twin XL Trundle

1. Ifihan

This manual provides essential instructions for the assembly, operation, maintenance, and troubleshooting of your Polibi Queen Size Platform Bed. Please read this manual thoroughly before assembly and use to ensure safe and correct operation. Keep this manual for future reference.

2. Alaye Aabo

• Nigbagbogbo tẹle awọn ilana apejọ ni pẹkipẹki.
• Rii daju pe gbogbo awọn boluti ati awọn skru ti wa ni wiwọ ni aabo ṣaaju lilo. Lorekore ṣayẹwo ki o tun-mu bi o ṣe pataki.
• Do not exceed the recommended weight capacity for the bed frame or trundle.
• Jeki awọn ẹya kekere ati awọn ohun elo iṣakojọpọ kuro lọdọ awọn ọmọde lati ṣe idiwọ awọn eewu gige.
• Use on a level surface to prevent instability.

3. Package Awọn akoonu

Before beginning assembly, verify that all components and hardware are present. Refer to the detailed parts list included in your product packaging. The main components include:

• Queen Size Bed Frame (Headboard, Footboard, Side Rails, Slats)
• Two (2) Large Storage Drawers
• One (1) Twin XL Size Trundle Bed Frame
• Apejọ Hardware ati Irinṣẹ

Àwòrán 3.1: Ìwọ̀n Ọjà àti Àwọn Ohun Èlò Tó Wà Lóríview

4. Eto ati Apejọ

Assembly of the Polibi Queen Size Platform Bed is required. Please follow the step-by-step instructions provided in the separate assembly guide included with your product packaging. Ensure you have adequate space and a helper for easier assembly.

Awọn Igbesẹ Apejọ Gbogbogbo:

1. Yọọ gbogbo awọn paati ati rii daju lodi si atokọ awọn ẹya.
2. Kó àwọn apá orí àti ẹsẹ̀ pọ̀.
3. So awọn afowodimu ẹgbẹ pọ si ori ori ati atẹlẹsẹ.
4. Install the bed slats onto the main frame.
5. Assemble the two storage drawers.
6. Assemble the Twin XL trundle bed frame.
7. Insert the assembled drawers and trundle into their respective positions under the main bed frame.

Figure 4.1: Bed Frame Structure and Slat Installation

Figure 4.2: Twin XL Trundle Frame

5. Awọn ilana Iṣiṣẹ

5.1 Using the Storage Drawers

The Polibi Queen Platform Bed includes two large storage drawers located on one side of the bed. These drawers are designed to slide smoothly on their casters for easy access.

• To open: Gently pull the drawer handle outwards.
• To close: Push the drawer inwards until it is fully recessed under the bed frame.
• Avoid overloading the drawers to ensure smooth operation and prevent damage.

Figure 5.1: Accessing Storage Drawers

5.2 Deploying the Twin XL Trundle

The Twin XL trundle bed is designed for convenient guest accommodation and slides out from under the main bed frame.

• To deploy: Locate the trundle at the foot of the main bed. Gently pull the trundle frame outwards from under the main bed. It will roll on its casters.
• To retract: Push the trundle frame back under the main bed until it is fully recessed.
• Ensure the area around the trundle is clear before deploying or retracting.

Figure 5.2: Deploying the Twin XL Trundle

6. Itọju

6.1 Ninu

• For general cleaning, wipe the wood surfaces with a soft, damp asọ.
• Yẹra fún lílo àwọn kẹ́míkà líle, àwọn ohun ìfọṣọ, tàbí àwọn ohun ìfọṣọ tí ó lè ba ìparí rẹ̀ jẹ́.
• Máa nu gbogbo ìṣàn tí ó bá dà sílẹ̀ kí ó má ​​baà bàjẹ́.

6.2 Fastener sọwedowo

• Periodically (e.g., every 3-6 months), check all bolts, screws, and connections to ensure they remain tight.
• Re-tighten any loose fasteners to maintain the bed's stability and structural integrity. Do not overtighten.

7. Laasigbotitusita

7.1 Awọn ariwo ariwo

• Nitori: Loose fasteners or friction between wood components.
• Ojutu: Check and tighten all assembly bolts and screws. If squeaking persists, apply a small amount of paraffin wax or silicone spray to contact points between slats and side rails.

7.2 Drawers Sticking or Not Sliding Smoothly

• Nitori: Overloaded drawers, debris in the tracks, or misaligned casters.
• Ojutu: Reduce the weight in the drawers. Clean any dust or debris from the caster wheels and the area they roll on. Check if the casters are properly attached and aligned.

7.3 Trundle Not Moving Easily

• Nitori: Obstruction, uneven flooring, or issues with trundle casters.
• Ojutu: Ensure no objects are blocking the trundle's path. Verify the bed is on a level surface. Check trundle casters for debris or damage; clean or replace if necessary.

8. Awọn pato

9. Atilẹyin ọja ati Support

For warranty information, please refer to the documentation included with your product packaging or visit the official Polibi website. For customer support, assistance with parts, or further inquiries, please contact Polibi customer service through their official channels.

You can visit the Polibi Store for more information: Ile itaja Polibi lori Amazon