Ọrọ Iṣaaju
O ṣeun fun riraasing the Vivitar Sky Navigator RC Helicopter. This quad-copter helicopter is designed for users aged 8 years and older, offering an engaging aerial experience with precise controls and LED lights for night flying. This manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your new RC helicopter.
Ohun ti o wa ninu Apoti
Carefully unpack all components and ensure all items are present before discarding the packaging. The complete set includes:
- Quad-copter Helicopter
- Joystick Adarí
- Afowoyi Olumulo (iwe-ipamọ yii)
- 1-odun atilẹyin ọja Alaye
- Micro USB Ngba agbara USB
olusin 1: Iwaju view of the Vivitar Sky Navigator RC Helicopter packaging, illustrating the helicopter, controller, and listed contents.
Alaye Aabo
ÌKÌLỌ̀: Ka gbogbo ìkìlọ̀ àti ìtọ́ni ààbò kí o tó lo ọjà yìí. Àìtẹ̀lé àwọn ìkìlọ̀ àti ìtọ́ni lè yọrí sí ìkọlù iná mànàmáná, iná, àti/tàbí ìpalára ńlá.
- Ikilọ Batiri: Do not connect improperly. Do not dispose of in fire or expose to excess heat. Do not crush, puncture, incinerate, or short circuit external contacts.
- Always operate the helicopter in open, clear areas, away from people, animals, and obstacles.
- Má ṣe fò lọ síbi àwọn okùn iná mànàmáná, igi tàbí omi.
- A ṣe iṣeduro abojuto agbalagba fun awọn olumulo ti o wa labẹ ọdun 14.
- Ensure the helicopter is turned off when not in use or during charging.
- Lo okùn gbigba agbara ti a pese ati awọn orisun agbara ti a ṣeduro nikan.
olusin 2: Pada view of the Vivitar Sky Navigator RC Helicopter packaging, detailing battery warnings and initial setup instructions for the helicopter and remote control.
Ṣeto
1. Controller Battery Installation
- Locate the battery compartment on the back of the joystick controller.
- Ṣii ideri iyẹwu batiri naa.
- Fi awọn batiri 3 AA sii (kii ṣe pẹlu), aridaju polarity ti o pe (+/-).
- Pa ideri batiri naa ni aabo.
2. Helicopter Charging
- Ensure the helicopter's power switch is in the "OFF" position.
- Connect the micro USB charging cable to the charging port on the helicopter.
- So ìpẹ̀kun kejì okùn USB pọ̀ mọ́ orísun agbára USB tó yẹ (fún àpẹẹrẹ, ibudo USB kọ̀ǹpútà, adapter odi USB).
- Ina ifihan agbara (ti o ba wa) yoo tan imọlẹ lakoko gbigba agbara ati pipa tabi yi awọ pada nigbati o ba ti gba agbara ni kikun.
- Gbigba agbara maa n gba to iṣẹju 30. Maṣe gba agbara ju bi o ti yẹ lọ.
- Once charging is complete, disconnect the USB cable.
Awọn ilana Iṣiṣẹ
1. Agbara Lori
- Turn on the helicopter by sliding its power switch to the "ON" position. The LED lights on the helicopter will illuminate.
- Turn on the joystick controller by sliding its power switch to the "ON" position. The controller's indicator light will flash.
- The controller and helicopter will automatically pair. The controller's indicator light will become solid once paired.
2. Ipilẹ Flight idari
The advanced joystick controller provides precise maneuverability. Familiarize yourself with the controls before attempting flight.
- Joystick Òsì (Throttle): Push up to increase altitude (fly up), pull down to decrease altitude (fly down).
- Joystick Ọ̀tún (Ìtọ́sọ́nà): Push left to turn left, push right to turn right.
- Trim Controls: Use the trim buttons (if available) to fine-tune the helicopter's stability if it drifts in a particular direction.
3. Night Flying
The Vivitar Sky Navigator features integrated LED lights, allowing for enhanced visibility and exciting flight experiences during nighttime operation. Ensure you still have a clear, safe flying area even with the lights.
4. Agbara Pa
- Land the helicopter safely.
- Slide the power switch on the helicopter to the "OFF" position.
- Slide the power switch on the controller to the "OFF" position.
Itoju
- Ninu: Use a soft, dry cloth to clean the helicopter and controller. Do not use harsh chemicals or liquids.
- Ibi ipamọ: Store the helicopter and controller in a cool, dry place away from direct sunlight and extreme temperatures. Remove batteries from the controller if storing for extended periods.
- Ayewo Propeller: Periodically check propellers for damage. Replace any bent or broken propellers to ensure optimal flight performance.
Laasigbotitusita
If you encounter issues with your Vivitar Sky Navigator RC Helicopter, please refer to the following common solutions:
- Helicopter not responding:
- Ensure both the helicopter and controller are powered on.
- Check if the controller batteries are fresh and correctly installed.
- Re-pair the helicopter and controller by turning both off and then on again.
- Ensure the helicopter battery is charged.
- Helicopter not taking off or flying weakly:
- Charge the helicopter battery fully.
- Check for any obstructions or damage to the propellers.
- Helicopter drifts during flight:
- Use the trim controls on the controller to adjust for stable flight.
- Ensure there are no strong air currents or winds in the flying area.
For further assistance, please contact customer support as detailed in the Warranty and Support section.
Awọn pato
| Nọmba awoṣe | DRC251-ASST1 |
| Ọja Mefa | 9 x 3 x 4 inches |
| Iwọn Nkan | 1 iwon |
| Olupese niyanju ori | 8 ọdun ati si oke |
| Awọn batiri Adarí | Awọn batiri AA 3 (kii ṣe pẹlu) |
| Ọna gbigba agbara | Micro USB |
| Olupese | Sakar International |
Atilẹyin ọja ati Support
This Vivitar Sky Navigator RC Helicopter comes with a 1-odun atilẹyin ọja. For detailed warranty information, please refer to the warranty card included in your packaging or visit the manufacturer's webojula.
For technical support, troubleshooting assistance, or warranty claims, please contact Sakar International customer service. Contact information can typically be found on the product packaging or their official webojula.





