Ìwé Ìtọ́sọ́nà Olùlò F03-0329-0AA1 AtomStack Swift

AtomStack F03-0329-0AA1 Swift

Awọn pato

• Orukọ ọja: AtomStack Swift
• Nọmba awoṣe: F03-0329-0AA1
• Ẹya: B
• Iṣagbewọle agbara: DC 24V
• Awọn ibudo: Type-C Port (For PC Connection), Expansion Port (for Chuck, Roller, and Other Accessories)
• Atọka ipo: Solid blue when working

Awọn ilana Lilo ọja

Akojọ Awọn apakan:

• Apejọ-apa X
• Left Y-axis assembly (with motor)
• Right Y-axis assembly
• Adaparọ agbara
• Llave fija (Fixed wrench)

Getting to Know AtomStack Swift:
Familiarise yourself with the different assemblies and parts of the AtomStack Swift, including the X-axis assembly, left and right Y-axis assemblies, power adapter, and optical shaft.

How to Install Swift:

1. Place the five assemblies as shown in the diagram. Ensure the X-axis assembly belt faces downward, and the Y-axis assembly with the motor is on the left.
2. Install the optical shaft onto the X-axis. Push the X-axis toward the front X-axis assembly with both hands, then tighten the coupling and timing pulley. Ensure it is fully inserted and aligned parallel with the front X-axis assembly.
3. If the hand-tightened screw interferes with the optical axis, simply pull out the black part and rotate it downward again.

Awọn ẹya Akojọ

Getting to Know AtomStack Swift

How to install Swift

1. Place the five assemblies as shown in the diagram.
   Akiyesi: The X-axis assembly should have the belt facing downward, and the Y-axis assembly with the motor should be on the left.
2. Align and connect the five assemblies, then secure them using six M5×8 screws.
3. Install the optical shaft onto the X-axis. Push the X-axis toward the front X-axis assembly with both hands, then tighten the coupling and timing pulley.
   (Ensure it is fully inserted and aligned parallel with the front X-axis assembly)
4. Install the laser module and tighten the thumb knob.Akiyesi:
   If the hand-tightened screw interferes with the optical axis, simply pull out the black part and rotate it downward again.
5. Connect the motor cable, limit switch cables, and laser cable as shown in the diagram to complete the installation.

Ọna Idojukọ:
Place the workpiece. Turn the focusing knob downward and loosen the thumb screw. Let the laser module drop until the knob touches the material. Tighten the screw to fix the module, then return the knob to its original position.

Imọran:
When placing the material, use the X/Y axis scale lines for alignment. When using “Absolute Coords” mode in the software, the design will align with the material’s position.

• If the engraving quality deteriorates after prolonged use, adjust the eccentric nuts with the open-end wrench to improve it.
• Use the open-end wrench to adjust the eccentric nuts on the left and right Y-axes.
• Adjust them so that when the machine is tilted at a 45° angle, as shown, the X-axis slides down slowly and evenly.

ATOMSTACK Official Recommended Software

Mobile App Download Method：

Ọna Gbigba Software Kọmputa:
Ọna asopọ igbasilẹ AtomStack Studio: https://atomstack.com/pages/atomstack-studio-software

1. Official Download Link
   https://atomstack.com/pages/atomstack-studio-software
2. Ṣiṣayẹwo lati ṣe igbasilẹ

Software Resources

LightBurn
Unofficial software. Requires a separate purchase

Ọna igbasilẹ sọfitiwia Lightburn: Ṣe igbasilẹ ọna asopọ: https://lightburnsoftware.com/pages/download-trial

1. Scan to download the configuration file “AtomStack_Swift_Vxxx.lbdev”
2. Ṣii sọfitiwia LightBurn, yan: Awọn ẹrọ – Gbe wọle
3. Select “AtomStack_Swift_Vxxx.lbdev”, click “Open”, then “OK”. In the bottom right corner, select “AtomStack Swift”.
   The machine will beep once to confirm the connection.

Akiyesi: If adding the device manually, set the “Baud Rate” in “Device Settings” to 460800

Itọsọna olumulo

Pe wa

Scan the QR code for more information:

• Unboxing & First Use
• Use with the AtomStack APP
• Laasigbotitusita
• Itoju

Iṣẹ onibara:

• For the detailed warranty policy, please visit our official webojula: www.atomstack.com
• Fun atilẹyin imọ-ẹrọ ati iṣẹ, jọwọ fi imeeli ranṣẹ: support@atomstack.com

Olupese:
Shenzhen AtomStack Technologies Co., Ltd.

Zip koodu: 518172

Adirẹsi:
17th Floor, Building 3A, Phase II, Intelligent Park, No.. 76, Baohe Avenue, Baolong Street, Longgang District, Shenzhen, Guangdong, China.

Complies with 21 CFR 1040.10 and 1040.11 except for conformance with IEC60825-1 E, 3., as described in Laser Notice No.56, dated May 8, 2019.

FAQ