ESBE CRK210 Controller User Guide

ESBE CRK210 Controller

ESBE Series CRK210 ti wa ni idapo actuators pẹlu olutona. Iwọn CRK210 nfunni ni iṣakoso iwọn otutu ṣiṣan nigbagbogbo fun awọn ẹrọ pẹlu alapapo apapọ & iṣẹ itutu agbaiye. Awọn jara CRK210 ti pinnu lati ṣee lo pẹlu awọn falifu Series VRx.

Isẹ

• The CRK210 is a constant temperature controller intended for applications where a constant flow temperature is desired. The controller is integrated with an actuator and is designed to be used with rotating mixing valves series VRx.
• The Series CRK210 consists of two main components: an actuator and a flow temperature sensor. The primary function of the controller is to maintain a constant set temperature at the sensor location. The series includes a T/T2 (main temperature to alternative temperature) setting, which also controls the opening direction of the actuator. This feature is intended for devices with combined heating and cooling functions set by relay. Additional equipment, such as a clock, may be needed to release the relay if the heating/cooling unit lacks an available control signal. Releasing the relay changes the actuator’s working direction to match the source unit’s mode (heating or cooling). Settings are adjusted via a joystick and displayed on a screen.

Introduction of ESBE Self-Adaptive System

The ESBE Self-Adaptive System manages PI factors (Proportional gain and Integral response) by learning system behaviors and addressing issues previously managed by installers. This system ensures smooth controller operation, eliminates issues related to delays or response times, and delivers high control standards and comfort. This makes the CRK210 Series suitable for any system setup or environment.

Fifi sori ẹrọ

• Ipese agbara nipasẹ ohun ti nmu badọgba AC 230 V (ni pipe pẹlu ẹrọ oluyipada, okun ati plug iho ogiri).
• Sensọ iwọn otutu sisan wa pẹlu okun 1,5m to wa (kebulu to gun wa bi ẹya ẹrọ). Awọn sensọ gbọdọ wa ni farada sọtọ lati iwọn otutu ibaramu.
• Ṣeun si wiwo pataki laarin jara oludari CRK210 ati jara ESBE VRG ati VRH, ẹyọkan lapapọ ni iduroṣinṣin alailẹgbẹ ati konge nigbati o n ṣakoso.

Iyan Equipment

• Art. No. 16200700: ARA801 Auxiliary switch kit
• Art. No. 17053100: CRA911 Flow temperature sensor, 5m cable
• Art. No. 17056200: CRA915 UK plug

Dara dapọ falifu

• jara VRG130
• jara VRG230
• jara VRG330
• jara VRH130
• jara 3MG
• jara 3G
• Series 3F DN50

Adapter Awọn ohun elo
Required adaptor kits for easy fitting onto an ESBE rotary mixing valve series VRx are supplied with each controller. Adaptor kits can also be ordered separately.

• Art. No. 16000500: ESBE valve series VRG, VRH, G, MG, F
• Art. No. 16000600: Meibes
• Art. No. 16000700: Watts
• Art. No. 16000800: Honeywell Corona
• Art. No. 16000900: Lovato
• Art. No. 16001000: PAW
• Art. No. 16001100: Wita Minimix, Maximix

IDAGBASOKE

Technical Data Details

• Ambient temperature: max. +55°C, min. -5°C
• Sensọ iru: NTC
• Temperature range: Flow temperature sensor +5 to +95°C
• Enclosure rating, Actuator unit: IP41
• Kilasi Idaabobo: II
• Power supply, Actuator unit: 230 ± 10% V AC, 50 Hz
• Power consumption (230 V AC): 10 VA
• Torque (Actuator): 6 Nm
• Running time at max. speed (Actuator): 30s
• ErP Temperature control class: N/A
• Energy efficiency contribution: N/A

Complies with LVD 2014/35/EU, EMC 2014/30/EU, RoHS 2011/65/EU

Fifi sori EXAMPLE

Iwọn otutu ṣiṣan igbagbogbo lọ si Circuit alapapo
Awọn iṣakoso CRK210 ati aabo iwọn otutu sisan ti ṣeto. Alakoso ti sopọ si ẹrọ pẹlu alapapo ati iṣẹ itutu agbaiye. Asopọmọra ti wa ni ṣiṣe nipasẹ yii, eyiti nigbati o ba tu silẹ yoo yi itọsọna ṣiṣi ti CRK210 pada. Ẹya yii ngbanilaaye CRK210 lati ṣatunṣe ilana iṣẹ laarin alapapo tabi ipo itutu agbaiye ti ẹrọ alapapo / itutu agbaiye.

Awọn ohun elo ti o han jẹ examples ti ọja lilo! Ṣaaju lilo ọja ni eyikeyi ohun elo, awọn ilana agbegbe ati ti orilẹ-ede nilo lati ṣayẹwo.