FlySpark-logo

FlySpark F4 V1 Stack Flight Controller

FlySpark-F4-V1-Stack-Flight-Controller-productAwọn pato

  • Orukọ ọja:
    FlySpark F4 V1 BLS 60A akopọ
  • Awọn ẹya AI:
    Sensor Fusion, PID Autotuning, Adaptive Filtering
  • Atilẹyin Software:
    Betaflight, INAV, Ardupilot, EMU-ofurufu, SkyBrush
  • ESC Communication:
    BLHeli_S Bluetooth & USB-C
  • Asopọmọra:
    3-6S LiPo
  • Iwọn:
    47.8mm(L) x 47.5mm(W) x 18.3mm(H)
  • Iṣagbesori:
    30.5 x 30.5mm pẹlu 4mm iho iwọn
  • Ìwúwo:
    34g

FlySpark-F4-V1-Stack-Flight-Controller-fig-9 FlySpark-F4-V1-Stack-Flight-Controller-fig-10

Awọn ilana Lilo ọja

Alakoso ofurufu FlySpark F4 V1

Ilana:
Refer to the user manual for the layout of the flight controller.

Isopọ agbeegbe:
Connect peripherals as per the provided diagram.

Ohun elo & Iṣeto FC:
Use the recommended apps and follow the configuration instructions.

Imudojuiwọn Firmware FC:
Connect the flight controller to a PC via USB for firmware updates.

FLYSPARK BLS 60A 4-IN-1 ESC

Ilana:
Check the layout guide in the manual for proper installation.

Isopọ pẹlu Motors & okun agbara:
Connect motors and power cables securely.

Iṣeto ESC:
Use the FlySpark app for ESC configuration settings.

Imudojuiwọn Famuwia ESC:
Follow the provided steps to update the firmware for ESC.

FlySpark F4 V1 BLS 60A akopọFlySpark-F4-V1-Stack-Flight-Controller-fig-1

Awọn alaye lẹkunrẹrẹ PariviewFlySpark-F4-V1-Stack-Flight-Controller-fig-20

FlySpark-F4-V1-Stack-Flight-Controller-fig-2 FlySpark-F4-V1-Stack-Flight-Controller-fig-3

PackageFlySpark-F4-V1-Stack-Flight-Controller-fig-4.1

  • FlySpark F4 V1 Flight Controller x 1
  • FlySpark BLS 60A 4-in-1 ESC x 1
  • 35V 1000uF Kekere ESR Kapasito x 1
  • M3 Ọra Eso x 4
  • SH 1.0mm 25mm-igun 8pin Cable(fun asopọ FC-ESC) x 1 SH 1.0mm 75mm-igun 6pin Cable* x 1
  • M3*30mm Iner-hexagon skru x 4
  • DJI 6pin Cable(80mm) x 1
  • Okun Agbara XT60(100mm) x 1

FlySpark-F4-V1-Stack-Flight-Controller-fig-5.2

FC Asopọ aworan atọkaFlySpark-F4-V1-Stack-Flight-Controller-fig-6

Itọsọna si Awọn isopọ FC & ESC

Ọna 1:

  • Using 8.Pin JST CableFlySpark-F4-V1-Stack-Flight-Controller-fig-7

Ọna 2:

Taara Soldering

  • Solder 8 onirin si awọn paadi 8 ni opin kọọkan, ni atẹle awọn asọye paadi ni isalẹFlySpark-F4-V1-Stack-Flight-Controller-fig-8

Ofurufu oludari alaye lẹkunrẹrẹ

FlySpark-F4-V1-Stack-Flight-Controller-fig-11.2

  • Lo okun 6-pin wa pẹlu O3 Air Unit FlySpark-F4-V1-Stack-Flight-Controller-fig-12.1
  • Lo okun 6-pin wa pẹlu FlySpark F4 V1 BLS 60A Stack

FlySpark-F4-V1-Stack-Flight-Controller-fig-13

F C Firmware  update
To update the firmware for your FlySpark F4 VI flight controller, please follow these steps:
Connect the Flight Controller to Your PC:

  • Use a USB cable to connect the FlySpark F4 VI flight controller to your PC

Open Betaflight I INAV Configurator.

  • . Launch the Betaflight Configurator or INAV Configurator on your PC. For this guide, we’ll use Betaflight Configurator as an example.

Navigate to Firmware Flashing:

  • In the Betaflight Configurator, navigate to the ‘Firmware Flashing’ page.

Select Target and Flash Firmware:

  •  Choose the target firmware for ‘Flyspark F4 VI’ from the dropdown menu.
  • Initiate the firmware flashing process.

Akiyesi:
The Flyspark F4 VI flight controller does not support wireless firmware flashing. It must be  performed using a USB connection to your PC.

FlySpark-F4-V1-Stack-Flight-Controller-fig-14

Flyspark BLS 60A 4-in-l ESCFlySpark-F4-V1-Stack-Flight-Controller-fig-15

Asopọ pẹlu Motors & Power CableFlySpark-F4-V1-Stack-Flight-Controller-fig-16

ESC Specs FlySpark F4 V1 BLS 60A StackFlySpark-F4-V1-Stack-Flight-Controller-fig-17

ESC famuwia imudojuiwọn
8-bit 50A ESC yii wa tẹlẹ ti kojọpọ pẹlu famuwia BLHeliS ṣugbọn o tun le tan imọlẹ si famuwia Bluejay, ti nfunni sisẹ RPM ati atilẹyin Dshot Bi-itọnisọna. Tẹle awọn igbesẹ wọnyi lati mu famuwia dojuiwọn:

  1. Prepare Your Drone:
    Remove all propellers from your drone for safety.
  2. Connect ESC to Flight Controller:
    Ensure the flight controller is properly connected to the ESC, then power up the drone. This step ensures the ESC initializes correctly.
  3. Sopọ si PC:
    Use a USB Type-C cable to connect the flight controller to your computer.
  4. Access Firmware Configuration:
    Open the Chrome browser and visit: www.esc-configurator.com
  5. Flashing Steps:
    Follow the firmware flashing steps displayed on the configurator website. Ensure you select the appropriate options for flashing to Bluejay firmware.

FlySpark-F4-V1-Stack-Flight-Controller-fig-21

IKILỌ:FlySpark-F4-V1-Stack-Flight-Controller-fig-19

  • PROPELLERS OFF: REMOVE ALL PROPELLERS.
  • SECURE CONNECTION: ENSURE SECURE ESC CONNECTION.
  • FOLLOW STEPS: FOLLOW FLASHING INSTRUCTIONS CAREFULLY.
  • STABLE POWER: ENSURE STABLE POWER SUPPLY.
  • www.FlySpark.in

FAQs

Bawo ni MO ṣe ṣe imudojuiwọn famuwia ESC naa?

To update the ESC firmware, follow these steps: 1. Prepare Your Drone: Remove all propellers for safety. 2. Connect ESC to Flight Controller: Ensure proper connection to the ESC and power up.

Awọn iwe aṣẹ / Awọn orisun

FlySpark F4 V1 Stack Flight Controller [pdf] Afowoyi olumulo
F4 V1, BLS 60A, F4 V1 Stack Flight Controller, F4 V1, Stack Flight Controller, Flight Controller, Controller

Awọn itọkasi

Fi ọrọìwòye

Adirẹsi imeeli rẹ kii yoo ṣe atẹjade. Awọn aaye ti a beere ti wa ni samisi *