Getac GET-140 Module Instruction Manual

GET-140 fifi sori Afowoyi

A. Atọka sisan fifi sori jẹ bi atẹle:

B. The detailed installation process is as follows:

Attach shielding materia:

1.1. Use amorphous laminating machine, adjust the parameters before use;
1.2. Joint before must ensure the neatness of PCB, shielding materials, PCB, shielding materials and platform must be perfectly, can’t offset, shielding material can’t fold, not beyond the PCB edge, the intracrystalline shrinkage is less than 1.0 mm. Figure 1 and 2:

Split control card :

Awọn kaadi iṣakoso ti wa ni gbe ni ti o wa titi Iho, tẹ awọn iṣẹ bọtini, ki o si ya awọn iṣakoso kaadi. Bi o ṣe han ni aworan 3:

Installation control card :
Fi awọn ipari ika goolu meji ti FPC sii ni ṣiṣi asopo ni akoko kanna ki o fi asopo naa sii ni pẹlẹbẹ.
Titari laini si isalẹ ti asopo naa ki o tẹ ideri asopo mọlẹ,

The performance test:

Ṣe idanwo nronu itanna lati ṣe idanwo nipasẹ sisopọ ohun elo idanwo si ohun elo idanwo naa:
Ṣe akiyesi boya atunse wa, fifọ laini, kọsọ ko si ni ipo, gbigbọn ati awọn abawọn aṣiṣe miiran.

Clean the PCB:

Mu ese iwaju ati ẹhin awo eriali pẹlu asọ ti ko ni eruku ti a fibọ sinu ọti.

Double-sided tape on the back of control card:

Lori ẹhin kaadi iṣakoso, lẹẹmọ 30 * 20 * T0.1mm alemora apa meji,

Double-sided adhesive is affixed to the back of antenna plate:

Awo eriali ti ṣe pọ si isalẹ ati lẹẹmọ pẹlu alemora apa meji 3M dudu,

Fixed control panel :

FPC ti awo eriali ti ṣe pọ nipasẹ lilo ohun elo kika, ati kaadi iṣakoso ti wa ni ẹhin lori ẹhin awo eriali naa,

Gbólóhùn kikọlu Ibaraẹnisọrọ Federal

Ẹrọ yii ni ibamu pẹlu Apá 15 ti Awọn ofin FCC. Isẹ jẹ koko ọrọ si awọn ipo meji wọnyi: (1) Ẹrọ yii le ma fa kikọlu ipalara, ati (2) ẹrọ yii gbọdọ gba kikọlu eyikeyi ti o gba, pẹlu kikọlu ti o le fa iṣẹ ti ko fẹ.
Ohun elo yii ti ni idanwo ati rii lati ni ibamu pẹlu awọn opin fun ẹrọ oni-nọmba Kilasi B kan, ni ibamu si Apá 15 ti Awọn ofin FCC. Awọn opin wọnyi jẹ apẹrẹ lati pese aabo to tọ si kikọlu ipalara ni fifi sori ibugbe kan. Ẹrọ yii n ṣe ipilẹṣẹ, nlo ati pe o le tan agbara ipo igbohunsafẹfẹ redio ati, ti ko ba fi sii ati lo ni ibamu pẹlu awọn ilana, o le fa kikọlu ipalara si awọn ibaraẹnisọrọ redio. Sibẹsibẹ, ko si iṣeduro pe kikọlu ko ni waye ni fifi sori ẹrọ kan pato. Ti ohun elo yii ba fa kikọlu ipalara si redio tabi gbigba tẹlifisiọnu, eyiti o le pinnu nipasẹ titan ohun elo naa ni pipa ati tan, a gba olumulo niyanju lati gbiyanju lati ṣatunṣe kikọlu naa nipasẹ ọkan ninu awọn iwọn wọnyi:

• Reorient tabi tun eriali gbigba pada.
• Mu iyatọ pọ si laarin ẹrọ ati olugba.
• So ohun elo pọ si ọna iṣan lori Circuit ti o yatọ si eyiti olugba ti sopọ.
• Kan si alagbawo oniṣowo tabi redio ti o ni iriri / onimọ-ẹrọ TV fun iranlọwọ.

Išọra FCC: Eyikeyi iyipada tabi awọn iyipada ti ko fọwọsi ni pato nipasẹ ẹgbẹ ti o ni iduro fun ibamu le sọ aṣẹ olumulo di ofo lati ṣiṣẹ ohun elo yii.
Atagba yii ko gbọdọ wa ni ipo tabi ṣiṣẹ ni apapo pẹlu eyikeyi eriali miiran tabi atagba.
This module has been tested for compliance to FCC Part 15.209 and 15.207
Module naa ni idanwo fun ipo lilo ifihan RF alagbeegbe imurasilẹ. Eyikeyi awọn ipo lilo miiran gẹgẹbi ipo-ipo pẹlu awọn atagba (s) miiran tabi lilo ni ipo gbigbe yoo nilo atunyẹwo lọtọ nipasẹ ohun elo iyipada iyọọda kilasi II tabi iwe-ẹri tuntun.
Atagba yii jẹ idanwo ni ipo ifihan RF alagbeka iduroṣinṣin ati eyikeyi ti o wa ni ipo tabi gbigbe nigbakanna pẹlu atagba (awọn) miiran tabi lilo gbigbe yoo nilo atunyẹwo iyipada iyọọda kilasi II lọtọ tabi iwe-ẹri tuntun.
2.2 Akojọ ti awọn ofin FCC to wulo
This module has been tested for compliance to FCC part 15.209 and 15.207
2.3 Summarize the specific operational use conditions.
This module is exclusively for use in the host device G140, G140Y(Y= 10 characters, Y can be 0 to 9, A to Z, a to z, “/”, “1”, “-“, ” or blank for marketing purpose) incorporates this module (module model name GET-140 and the antenna certified for use with this module.
Incorporating this module into a host device other than G140, G140Y(Y= 10 characters, Y can be 0 to 9, A to Z, a to z, “/”, “”, “-“, “_” or blank for marketing purpose) will require a separate reassessment through a class II permissive change or new certification. Full testing for the new specific host is required.
2.4 Limited ilana module
This Limited module if used on any new host configuration, field strength (15.209), RF exposure and EMI (15.107, 15.109) items should be re-tested and will require FCC permissive change filing by grantee.

2.5 Eriali awọn aṣa
Ko ṣiṣẹ fun.
2.7 Eriali

Awọn eriali wọnyi ti ni ifọwọsi fun lilo pẹlu module yii; eriali ti kanna iru pẹlu dogba tabi kekere ere le tun ti wa ni lo pẹlu yi module.
This module is limited for Getac’s hosts only. Incorporating this module into a host device other than G140, G140Y(Y= 10 characters, Y can be 0 to 9, A to Z, a to z, “/”, “”, “-“, “_” or blank for marketing purpose) will require a separate reassessment through a class II permissive change or new certification. The following test plan for the new specific host is required.

Test Plan(for being installed into the new specific host)
1. RF:

2. Ifihan RF
3. EMI:

2.12 Bawo ni lati ṣe awọn ayipada
Only Grantees are permitted to make permissive changes. Please contact us should the host integrator expect the module to be used differently than as granted.
Grantee Information:
Company Name: Getac Technology Corporation
Contact person: Kevin Chiang
FRN: 0018268243
Street Address: 5F., Building A, No.209, Sec. 1 Nangang., Rd.
City/Province/Zip: Taipei City, 11568, Taiwan
Telephone No: +886-2-27857888
Imeeli: kevin.chiang@getac.com.tw

Gbólóhùn Ìfihàn Ìtọ́jú:
Ọja naa ni ibamu pẹlu opin ifihan RF to ṣee gbe FCC ti a ṣeto fun agbegbe ti a ko ṣakoso ati pe o jẹ ailewu fun iṣẹ ti a pinnu bi a ti ṣalaye ninu iwe afọwọkọ yii. Idinku ifihan RF siwaju le ṣee waye ti ọja ba le tọju bi o ti ṣee ṣe lati ara olumulo tabi ṣeto ẹrọ naa si kekere agbara iṣẹjade ti iru iṣẹ ba wa.
Ohun elo yii ni ibamu pẹlu awọn opin ifihan itankalẹ alagbeka FCC ti a ṣeto fun agbegbe ti a ko ṣakoso.
This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body. If the module is installed in a portable host, a separate SAR evaluation is required to confirm compliance with relevant FCC portable RF exposure rules.
AKIYESI PATAKI
Ni iṣẹlẹ ti awọn ipo wọnyi ko le pade (fun exampAwọn atunto kọǹpútà alágbèéká kan tabi ipo-ipo pẹlu atagba miiran), lẹhinna aṣẹ FCC ko ni ka pe o wulo ati pe ID FCC ko le ṣee lo lori ọja ikẹhin. Ni awọn ipo wọnyi, oluṣepọ OEM yoo jẹ iduro fun atunyẹwo ọja ipari (pẹlu atagba) ati gbigba aṣẹ FCC lọtọ.
Ipari Ifamisi Ọja:
The final end product must be labeled in a visible area with the following: “Contains FCC ID:QYLGET140G14”.
ID FCC ti olufunni le ṣee lo nikan nigbati gbogbo awọn ibeere ifaramọ FCC pade.
Alaye Afowoyi Si Olumulo Ipari
Oluṣeto OEM ni lati mọ lati ma pese alaye si olumulo ipari nipa bi o ṣe le fi sori ẹrọ tabi yọkuro module RF yii ni afọwọṣe olumulo ti ọja ipari eyiti o ṣepọ module yii. Iwe afọwọkọ olumulo ipari yoo pẹlu gbogbo alaye ilana ti a beere fun/ikilọ gẹgẹbi a ṣe han ninu iwe afọwọkọ yii.
OEM / Gbalejo olupese ojuse
Awọn aṣelọpọ OEM / Gbalejo jẹ iduro fun ibamu ti Gbalejo ati Module. Ọja ikẹhin gbọdọ jẹ atunwo si gbogbo awọn ibeere pataki ti ofin FCC gẹgẹbi FCC Apá 15 Ipin B ṣaaju ki o to gbe si ọja AMẸRIKA. Eyi pẹlu atunyẹwo module atagba fun ibamu pẹlu Redio ati awọn ibeere pataki EMF ti awọn ofin FCC. A ko gbọdọ dapọ module yii si eyikeyi ẹrọ miiran tabi eto laisi atunwo fun ibamu bi redio pupọ ati ohun elo apapọ.
Module atagba yii ni idanwo bi eto abẹlẹ ati iwe-ẹri rẹ ko ni aabo ibeere ofin FCC Apá 15 Abala B (itumọ airotẹlẹ) ti o wulo fun agbalejo ikẹhin. Gbalejo ikẹhin yoo tun nilo lati tun ṣe atunyẹwo fun ibamu si apakan yii ti awọn ibeere ofin ti o ba wulo.
Niwọn igba ti gbogbo awọn ipo ti o wa loke ti pade, idanwo atagba siwaju kii yoo nilo. Bibẹẹkọ, oluṣepọ OEM tun jẹ iduro fun idanwo ọja-ipari wọn fun eyikeyi awọn ibeere ibamu afikun ti o nilo pẹlu module yii ti fi sori ẹrọ.

Alaye ile-iṣẹ Canada:

Ẹrọ yii ni ibamu pẹlu awọn RSS ti ko ni iwe-aṣẹ ISED. Iṣiṣẹ jẹ koko-ọrọ si awọn ipo meji wọnyi:
(1) Ẹrọ yii le ma fa kikọlu ipalara, ati (2) ẹrọ yii gbọdọ gba kikọlu eyikeyi ti o gba, pẹlu kikọlu ti o le fa iṣẹ ti ko fẹ.
AKIYESI PATAKI:
Ni iṣẹlẹ ti awọn ipo wọnyi ko le pade (fun exampAwọn atunto kọǹpútà alágbèéká kan tabi ipo-ipo pẹlu atagba miiran), lẹhinna aṣẹ Kanada ko ni ka pe o wulo ati pe ID IC ko le ṣee lo lori ọja ikẹhin. Ni awọn ipo wọnyi, oluṣeto OEM yoo jẹ iduro fun atunyẹwo ọja ipari (pẹlu atagba) ati gbigba aṣẹ Kanada lọtọ.
Ipari Ifamisi Ọja
The product can be kept as far as possible from the user body or set the device to lower output power if such function is available. The final end product must be labeled in a visible area with the following: “Contains IC: 10301A-GET140G14”.
Alaye Afowoyi Si Olumulo Ipari
Oluṣeto OEM ni lati mọ lati ma pese alaye si olumulo ipari nipa bi o ṣe le fi sori ẹrọ tabi yọkuro module RF yii ni afọwọṣe olumulo ti ọja ipari eyiti o ṣepọ module yii.
Iwe afọwọkọ olumulo ipari yoo pẹlu gbogbo alaye ilana ti a beere fun/ikilọ bi o ṣe han ninu iwe afọwọkọ yii.

Ẹrọ yii jẹ ipinnu fun awọn oluṣepọ OEM nikan labẹ awọn ipo wọnyi:

1. Module atagba le ma wa ni papọ pẹlu atagba tabi eriali miiran.
2. Ifọwọsi module wulo nikan nigbati module ti fi sori ẹrọ ni idanwo idanwo tabi ibaramu jara ti ogun ti o ni iru ifihan RF ti iwa pẹlu dogba tabi o tobi ijinna Iyapa eriali.

Niwọn igba ti awọn ipo 2 loke ti pade, idanwo atagba siwaju kii yoo nilo. Bibẹẹkọ, oluṣepọ OEM tun jẹ iduro fun idanwo ọja-ipari wọn fun eyikeyi awọn ibeere ibamu afikun ti o nilo pẹlu module yii ti fi sori ẹrọ.
Gbólóhùn Ìfihàn Ìtọ́jú:
Ọja naa ni ibamu pẹlu opin ifihan RF to ṣee gbe ti Ilu Kanada ti a ṣeto fun agbegbe ti a ko ṣakoso ati pe o wa ni ailewu fun iṣẹ ti a pinnu bi a ti ṣalaye ninu iwe afọwọkọ yii. Idinku ifihan RF siwaju le ṣee waye ti ọja ba le wa ni ipamọ bi o ti ṣee ṣe lati ara olumulo tabi ṣeto ẹrọ naa si isalẹ agbara iṣẹjade ti iru iṣẹ ba wa.

GET-140
FCC ID: QYLGET140G14
IC: 10301A-GET140G14