Lesen Precision LS9018-W PC Multi Function Controller

Ọjọ ti o wulo	Compiled By	Reviewed Nipa	Ti a fọwọsi nipasẹ
2025.4.28

• Ọja Specification
• Sample sipesifikesonu

Awọn akiyesi:

1. If the following information is updated, no further notice will be given. Please confirm whether the materials in your hand are the latest version before use.
2. We will not be responsible for the consequences caused by incorrect or inappropriate operations.

Product Introduction and Application Scope

PC Multi-function Controller (referred to as “PC Controller”). The controller has a built-in channel light to indicate its status, which is clear and easy to identify. It is equipped with a stable motor that provides real-time game vibration feedback, offering users an immersive gaming experience.

Ọja Awọn ẹya ara ẹrọ

1. The PC controller supports Bluetooth connection mode, wired connection mode, and 2.4G mode across different platforms.
2. Compatible with Windows, Switch console, Android, iOS, and Tesla systems.
3. Bluetooth mode supports PC, Switch, Android, and iOS, with platform switching achieved via combination keys.
4. Wired mode supports XINPUT (PC360), DINPUT functions, Switch, and Android.
5. 2.4G mode supports PC, Android, PS3, Switch, and Tesla.

Irisi ọja

Ọja isẹ Igbesẹ

Pairing Combination Keys (XBOX360 Layout Silk Print)

PC

Wulo Eto	Windows Eto
Ipo Ṣiṣẹ	Ipo Ti firanṣẹ USB	Ipo Bluetooth
Ipo Sisopọ	Plug in USB for automatic recognition	Pipọpọ: Hold Y+HOME buttons for 3 seconds Atunṣe: Short-press HOME button
Connected Device Name	Iṣawọle X: Xbox 360 Controller for Windows D-input: PC_Controller	Xbox Alailowaya Adarí
Imọlẹ Atọka	X-input: Indicator stays on D-input: Indicator stays on	Pipọpọ: Indicator flashes rapidly Atunṣe: Indicator flashes slowly Recognition: Indicator stays on
Awọn akiyesi	Long-press START+SELECT for 3 seconds to switch between X-input and D-input (cyclic switching)

YIRA

Wulo Eto	Yipada console
Ipo Ṣiṣẹ	Ipo Ti firanṣẹ USB	Ipo Bluetooth
Ipo Sisopọ	Plug in USB for automatic recognition	Pipọpọ: Hold Y+HOME buttons for 3 seconds Atunṣe: Short-press HOME button
Ti sopọ Orukọ ẹrọ
Imọlẹ Atọka	Atọka duro lori	Pipọpọ: Indicator flashes rapidly Atunṣe: Atọka seju laiyara Idanimọ: Atọka duro lori
Awọn akiyesi	For SWITCH console games	For SWITCH console games

Android

Wulo Eto	Android System
Ṣiṣẹ Ipo	Ipo Bluetooth	Ipo Ti firanṣẹ USB
Ipo Sisopọ	Pairing: Hold A+HOME buttons for 3 seconds Reconnection: Short-press HOME button	Plug in USB for automatic recognition
Ẹrọ ti a ti sopọ Oruko	Gamepad
Imọlẹ Atọka	Pairing: Indicator flashes rapidly Reconnection: Indicator flashes slowly Recognition: Indicator stays on	Recognition: Indicator stays on
Awọn akiyesi	For arcade games, Android native games, TV	For arcade games, Android native games, TV

IOS

Wulo Eto	Ohun elo System
Ipo Ṣiṣẹ	Ipo Bluetooth
Ipo Sisopọ	Pairing: Hold L1+HOME buttons for 3 seconds Reconnection: Short-press HOME button
Ti sopọ Orukọ ẹrọ	DUALSHOCK 4 Alailowaya Adarí

Imọlẹ Atọka	Pipọpọ: Indicator flashes rapidly Atunṣe: Indicator flashes slowly Recognition: Indicator stays on
Awọn akiyesi

2.4G:

1. Connect the 2.4G Dongle to the PC. Press and hold R1+HOME buttons for 3 seconds to power on and enter 2.4G pairing mode. The controller’s indicator will flash rapidly, and it will automatically connect to the PC. Upon successful connection, the 2.4G Dongle indicator and controller indicator will stay on, defaulting to X-input mode. Long-press START+SELECT for 3 seconds to switch to D-input mode (vibration prompt upon successful switch).
   X-input Name：Xbox 360 Controller for Windows
   D-input Name：Aurora PC Adarí
2. 2、Connect the 2.4G Dongle to Android. Press and hold R1+HOME buttons for 3 seconds to power on and enter
   2.4G pairing mode. The controller will automatically connect to Android, with both indicators staying on upon success.
3. Connect the 2.4G Dongle to SWITCH. Press and hold R1+HOME buttons for 3 seconds to power on and enter 2.4G pairing mode. The controller will automatically connect to SWITCH, with both indicators staying on upon success.
4. Connect the 2.4G Dongle to PS3. Press and hold R1+HOME buttons for 3 seconds to power on and enter 2.4G pairing mode. The controller will automatically connect to PS3, with both indicators staying on upon success.
5. Connect the 2.4G Dongle to Tesla. Press and hold R1+HOME buttons for 3 seconds to power on and enter 2.4G pairing mode. The controller will automatically connect to Tesla, with both indicators staying on upon success.
6. Short-press the HOME button to reconnect. The controller’s indicator will flash slowly, staying on upon successful reconnection.

Iṣẹ Turbo

Turbo Function Settings:

1. Hold the Turbo key and short-press the button to be set as TURBO; the button will enable manual rapid fire.
2. While in manual rapid fire, hold the Turbo key and short-press the assigned button to switch to automatic rapid fire.
3. While in automatic rapid fire, hold the Turbo key and short-press the assigned button to cancel the rapid fire function.
   • Rapid fire modes cycle: Manual Rapid Fire → Automatic Rapid Fire → Cancel Rapid Fire.
   • Assignable keys: A, B, X, Y, L1, R1, L2, R2, UP, DOWN, LEFT, RIGHT

Turbo Rapid Fire Speed Settings:

• Turbo + Right 3D Up: Increase speed by one gear
• Turbo + Right 3D Down: Decrease speed by one gear
• Hold Turbo and push the right joystick fully up to increase speed, or fully down to decrease speed. The motor will vibrate once per successful setting.
• Three speed gears: 1st gear 5 times/sec, 2nd gear 12 times/sec, 3rd gear 20 times/sec (settings are memory-preserved).

Ko Gbogbo Awọn iṣẹ Turbo kuro:

• Use the combination key Turbo + SELECT (-) to clear all rapid fire assignments.
• Turbo settings are not preserved when the controller is powered off.

Motor Vibration

1. The controller supports motor vibration feedback with left and right pressure-sensitive motors.
2. Vibration intensity adapts to feedback from platform games.
   1. Vibration Intensity Adjustment (settings preserved when powered off):
      1. Turbo + Left Joystick Up: Increase intensity by one gear
      2. Turbo + Left Joystick Down: Decrease intensity by one gear
      3. Four intensity levels: 0% – 30% – 75% – 100% (default: 75%). The motor will vibrate for 1 second upon completion of settings.

MACRO (Programming Function)

1. Supported Keys: A, B, X, Y, LB, RB, LT, RT, D-pad (UP/DOWN/LEFT/RIGHT), left joystick, right joystick, L3, R3.
2. Isẹ:
   Hold the SET key for 3 seconds (motor vibration prompt, channel light flashes slowly) to enter macro programming mode. Hold the keys to be combined; the channel light will flash rapidly three times to indicate key recording. Input intervals exceeding 15 seconds will auto-exit programming without saving.,Press M1 (M2) to confirm the combination key (motor vibration prompt, channel light stays on). (In wired charging mode, the indicator will revert to charging flash frequency.)

Ko Iṣe kuro:

1. Hold the SET key for 3 seconds to enter programming mode.
2. Press M1 (M2) without inputting any keys to clear the macro function for that back key (vibration prompt, channel light reverts to previous state)

• Programming memory: Settings are preserved when powered off. M1 and M2 are factory-reset to empty.
• Idiwọn: Each macro key supports up to 25 inputs. If ≥25 keys are recorded, the channel light will flash rapidly to indicate overload. Press the back key to save the first 25 inputs, or auto-exit without saving after 15 seconds.

Akiyesi: M1 and M2 cannot trigger functions simultaneously if both are programmed with combinations

Key Layout Switching
Use the combination key Turbo + R3 to switch A/B/X/Y key layouts (X-Y and A-B swapped). Settings are not preserved when powered off.

Atunṣe
Short-press the Home key when powered off to enter reconnection mode (30-second timeout). The controller will auto-power off if reconnection fails.

Agbara Paa

Tiipa afọwọṣe:

1. Long-press the Home key for 5 seconds during reconnection.
2. Long-press the Home key for 5 seconds while connected.
3. Long-press the Home key for 5 seconds during pairing.

Tiipa Aifọwọyi:

1. Auto-power off after 60 seconds of failed pairing.
2. Auto-power off after 30 seconds of failed reconnection.
3. Auto-power off after 5 minutes of inactivity (no button/joystick input) while connected.
4. Auto-power off when battery voltage drops below 3.45V (inoperable).

Gbigba agbara

• Agbara Pa: White LED flashes when plugged into a charger; LED turns off when fully charged.
• Ti sopọ: Corresponding channel light flashes slowly when plugged into USB; stays on when fully charged.

Itaniji Batiri Kekere / Tiipa

1. Nigbati batiri voltage drops below 3.6V (±0.05V error) in wireless mode, the channel light will flash rapidly for low battery warning.
2. Auto-power off when voltage drops below 3.45V (±0.05V error) in wireless mode.

Tun iṣẹ
Press the reset button on the back of the controller to restore default settings in case of anomalies.

Sensor Abnormality Calibration
When sensor issues occur:

1. Power off the controller and place it on a flat surface.
2. Hold (-)SELECT + HOME to enter calibration mode (HOME indicator flashes rapidly).
3. The indicator will turn off upon successful calibration; release the keys. If calibration fails, the HOME indicator stays on. Short-press HOME twice to restore normal mode, then retry calibration.

Imọ ni pato

Paramita	Data	Apejuwe
Awọn ọna Voltage	3.7V	Lithium battery-powered
Ṣiṣẹ lọwọlọwọ
Imurasilẹ Lọwọlọwọ	5 uA	O kere ju
Motor gbigbọn Lọwọlọwọ	60-120mA	Maximum current for both motors during normal operation
Ngba agbara Voltage	5V	USB 5V charging
Gbigba agbara lọwọlọwọ	>350mA
Agbara Batiri
Alailowaya Ibiti	8 mita	Bluetooth asopọ

Ibi ipamọ ati Gbigbe

1. Ibi ipamọ: Store in a shaded, room-temperature environment with good ventilation, dryness, and anti-static measures.
2. Gbigbe: Protect against static electricity, drops, dust, impacts, and extrusion.

Pataki Awọn akọsilẹ

1. All information in this specification is accurate and reliable, but the company assumes no liability for consequences caused by improper operation or use.
2. The company shall not be responsible for issues arising from unavoidable factors such as official system/game/platform upgrades or changes. The company reserves the right to final interpretation.
3. Awọn pato jẹ koko ọrọ si iyipada laisi akiyesi iṣaaju.

IKILO FCC

Ẹrọ yii ni ibamu pẹlu apakan 15 ti Awọn ofin FCC. Iṣiṣẹ jẹ koko-ọrọ si awọn ipo meji wọnyi:

1. Ẹrọ yii le ma fa kikọlu ipalara, ati
2. Ẹrọ yii gbọdọ gba kikọlu eyikeyi ti o gba, pẹlu kikọlu ti o le fa isẹ ti ko fẹ.

Eyikeyi awọn iyipada tabi awọn iyipada ti ko fọwọsi ni pato nipasẹ ẹgbẹ ti o ni iduro fun ibamu le sọ aṣẹ olumulo di ofo lati ṣiṣẹ ohun elo naa.

Akiyesi: Ohun elo yii ti ni idanwo ati rii lati ni ibamu pẹlu awọn opin fun ẹrọ oni nọmba Kilasi B, ni ibamu si apakan 15 ti Awọn ofin FCC. Awọn opin wọnyi jẹ apẹrẹ lati pese aabo to tọ si kikọlu ipalara ni fifi sori ibugbe kan. Ẹrọ yii n ṣe ipilẹṣẹ awọn lilo ati pe o le tan agbara ipo igbohunsafẹfẹ redio ati, ti ko ba fi sii ati lo ni ibamu pẹlu awọn ilana, o le fa kikọlu ipalara si awọn ibaraẹnisọrọ redio. Sibẹsibẹ, ko si iṣeduro pe kikọlu ko ni waye ni fifi sori ẹrọ kan pato. Ti ohun elo yii ba fa kikọlu ipalara si redio tabi gbigba tẹlifisiọnu, eyiti o le pinnu nipasẹ titan ohun elo naa ni pipa ati tan, a gba olumulo niyanju lati gbiyanju lati ṣatunṣe kikọlu naa nipasẹ ọkan tabi diẹ ẹ sii ti awọn iwọn wọnyi:

• Reorient tabi tun eriali gbigba pada.
• Mu iyatọ pọ si laarin ẹrọ ati olugba.
• So ohun elo pọ si ọna iṣan lori Circuit ti o yatọ si eyiti olugba ti sopọ.
• Kan si alagbawo oniṣowo tabi redio ti o ni iriri / onimọ-ẹrọ TV fun iranlọwọ.

Ikilọ:

• awọn iyipada tabi awọn iyipada ti ko fọwọsi ni gbangba nipasẹ ẹgbẹ ti o ni iduro fun ibamu le sọ aṣẹ olumulo di ofo lati ṣiṣẹ ohun elo naa.
• Awọn ẹrọ naa ti ni iṣiro lati pade ibeere ifihan RF gbogbogbo, ẹrọ naa le ṣee lo ni ipo ifihan gbigbe laisi ihamọ.

Awọn ibeere Nigbagbogbo

What platforms is the controller compatible with?

The controller is compatible with Windows, Switch console,Android, iOS, and Tesla systems.

How do I switch between X-input and D-input modes on Windows?

The controller is compatible with Windows, Switch console,Android, iOS, and Tesla systems.

Bawo ni MO ṣe so oluṣakoso pọ pẹlu ẹrọ Android kan?

For Android devices, hold A+HOME buttons for 3 seconds to pair via Bluetooth mode.

Awọn iwe aṣẹ / Awọn orisun

Lesen Precision LS9018-W PC Multi Function Controller [pdf] Itọsọna olumulo LS9018-W, 2BRPY-LS9018-W, 2BRPYLS9018W, LS9018-W PC Multi Function Controller, LS9018-W, PC Multi Function Controller, Function Controller, Controller

Awọn itọkasi

• Itọsọna olumulo