MULTIBRACKETS 5605 Wall Bracket Installation Guide

MULTIBRACKETS 5605 Wall Bracket

Sipesifikesonu

• Ọja: MULTIBRACKETS 5605 Universal Wall Bracket / Long Reach Arm Mount
• Iru: Full-motion articulating TV wall mount (dual arm long-reach swivel)
• Àwọ̀: Ipari irin dudu
• Ohun elo: Heavy-duty solid steel construction
• Screen Compatibility: Fits most flat-panel TVs 65″ – 110″ diagonal
• Max screen diagonal: ~279 cm (110″)
• Agbara iwuwo: Up to 125 kg (~275 lbs) load support
• Atilẹyin VESA: Compatible with most VESA patterns from 100×100 mm up to 800×600 mm
• Movement & Adjustment: Full-motion swivel, tilt, and rotate at multiple pivot points
• Ibi ikasi: approx. -5° to +10°
• Swivel/rotation: approximately 60° to +60°
• Extension from wall: up to 980 mm (~38.6″)
• Awọn ẹya:
  • Dual long-reach arms for flexible viewing awọn ipo
  • Smart cable management system to hide cables
  • Partially pre-assembled with a full hardware kit included
• Iru fifi sori ẹrọ: Wall mount, articulating bracket
• Àwọ̀: Dudu

PATAKI!
Your Plasma. LCD. TV, Projector, Projector Screen, or other HiFi equipment represents a considerable value.
If screws are Included they may not be suitable for the material of your wall, ceiling, or floor. Replace the screws with suitable ones if needed.
In case you are unsure regarding any aspects or the mounting of this product,t please
Kan si alamọdaju kan.

Ikilọ!
Nigbagbogbo ṣayẹwo awọn ijinle of awọn iho ṣaaju ki o to ti o bere an fifi sori ẹrọ.

Fits most 65″-110″ flat panel TV

• Weight capacity: 125kg/275 lbs
• VESA compliance: 100×100 200×200 300×300 400×200 400×400 600×400 800×600

IKILO 
Ipalara ti ara ẹni ati ibajẹ ohun-ini le ja si lati fifi sori ẹrọ ti ko tọ tabi apejọ. Ka ìkìlọ̀ tó tẹ̀ lé e yìí dáadáa kó o tó bẹ̀rẹ̀.

• Awọn ọja gbọdọ wa ni fi sori ẹrọ nipasẹ awọn akosemose.
• Ti o ko ba loye awọn ilana naa tabi ni awọn ifiyesi tabi awọn ibeere, jọwọ kan si insitola agbegbe ti o peye.
• Ma ṣe fi sii tabi ṣajọ ti ọja tabi ohun elo ba bajẹ tabi sonu. Ti o ba nilo awọn ẹya rirọpo, jọwọ kan si olupin agbegbe rẹ fun iranlọwọ.
• This product fits most65″-11D”LCD and plasma screens; maximum weight of LCD /plasma screen: 125kg.
• This product has been designed for use on masonry (solid concrete, 2000 PSI density minimum).
• For safe installation. The wall you are mounting to must support a minimum of 3 times the weight of the total load (the mount, the TV, and all accessories).
• Ma ṣe lo ọja yi fun eyikeyi ohun elo miiran ju apẹrẹ akọkọ lọ.
• This product contains moving parts; please use it with caution.
• When installing a flat panel display, please do not damage the electrical wiring or the power source.
• Olupese kii yoo ni ojuse fun gbigbe si ogiri inaro, tabi isẹlẹ tabi awọn ibajẹ ti o waye.
• Olupese ṣe idiwọ eyikeyi gbese fun awọn iyipada, fifi sori aibojumu, tabi fifi sori ẹrọ lori iwọn iwuwo pàtó kan.
• The manufacturer will not be liable for any damages arising out of the use of, or inabilityto use, the product.

Ti o ti kọja akojọ

Fifi sori ẹrọ

INSTALLATION OPTION 1: Wood Stud Installation (Suitable for 16″ or 24″ apart studs)

1. Use a stud finder to locate the drywall studs and mark the desired installation locations with a pencil.
2. So awoṣe Awo Odi (BB) mọ odi ni ipo fifi sori ẹrọ ti o fẹ.
3. Ensure the Wall Plate Template (BB) horizontal alignment is verified with a bubble level, and mark 6 lag bolt installation locations on the stencil and the wall. Attempt to locate the lag bolt locations in the middle of the studs.
4. Use a 7/32″ (5.5mm) drill bit to drill a pilot hole in the wall with a depth of at least 2.6″ (65mm).

Please note that failure to drill pilot holes may result in the lag bolt heads snapping during installation.

Secure the Wall Plate to the wall with 6 x Lag Bolts ( H) and 6 x Washers (H).

AKIYESI: Do not use Wall Anchor (I) for wood stud installation.

Aṣayan fifi sori ẹrọ 2: fifi sori ẹrọ odi Nja/Biriki

1. So awoṣe Awo Odi (BB) mọ odi ni ipo fifi sori ẹrọ ti o fẹ.
2. Ensure the Wall Plate Template (BB) horizontal alignment is verified with a bubble level, and mark 6 lag bolt installation locations on the stencil and the wall.
3. Use a 3/8″ (10 mm) drill bit to drill a pilot hole in the wall with a depth of at least 2.6″ (65mm). Please note that failure to drill pilot holes may result in the lag bolt heads snapping during installation.

Fi 6 x Odi ìdákọró (I) sinu ihò. Ṣe aabo Awo Odi si ogiri pẹlu 6 x Lag Bolts (H) ati 6 x Washers (H).

This full motion TV wall mount comes with a sliding mechanism that allows the arms and the TV to slide horizontally left or right for up to 15. 7 inches, while the wall plate is stationary on the wall. This feature allows the TV to be placed at an optimal position, regardless of the position of the wall studs. The mount will ship with the locking bars installed in place at their center position. If the sliding function will be used, take off the locking plates by removing the bolts that hold them in place.

Place the top locking bar at the desired position to fix the left slide limit of the arms, and place the bottom bar at the desired position to fix the right side limit of the arms. The raised metal piece at the end of the locking bars limits the slide of the arms. Ensure the locking bars are oriented correctly to ensure both the left and right side locking bars correctly limit the slide. Ensure both of the bolts are tightened at each locking bar’s position to prevent the arms from sliding off the wall plate.

IKILO: FAILURE TO INSTALL THE LOCKING BARS ADEQUATELY MAY RESULT IN THE ARMS AND THE TV FROM SLIDING OFF THE WALL PLATE.

Attaching the TV to the Mount (For Displays With Smaller Bolt Hole Patterns)
For TVs with smaller bolt hole patterns of VESA 100×100, 100×200, 200×100, and 200x200mm, the TV can be mounted directly on the plate, without the extension bars.

So TV si Oke (Fun Awọn ifihan Pẹlu Awọn awoṣe Iho Bolt Tobi) Fun awọn TV pẹlu awọn ilana iho boluti nla ti VESA 300 × 300,400 × 200,400 × 400,600 × 400, 800 × 600 mm, lo awọn biraketi TV ati awọn ifi itẹsiwaju lati fi sori ẹrọ naa TV si oke.

Attach the 2 x TV Brackets to the back of the TV by using screws A+E, B+E, C+E, or Dor G.

AKIYESI: The hardware packet provided fits most TVs in the market. If your TV requires different hardware, please contact us at òke-it.com to procure additional hardware kits.

Ensure the screws are adequately engaged with the screw holes on the TV.
Do not overtighten the screws. Ensure the TV brackets sit flat with the back of the T.V.

Hangina g TV On The Wall Mount Arms

Lift the TV (two persons recommended) and hang the TV brackets onto the wall mount extension bars.

Ni ifipamo The TV Lori Oke

Secure the TV brackets on the mount by attaching the 4 x AA Safety Brackets with 4 x F Screws as shown ointhe image.

AKIYESI: Ikuna lati ni aabo awọn biraketi TV si oke pẹlu Awọn biraketi Aabo AA le ja si gbigbe lairotẹlẹ kuro ni TV lati awọn ifi itẹsiwaju, o ṣee ṣe ja si ibajẹ ti ara tabi ohun-ini.

Atunse ipele -5° – +5°
The mount allows up to 5 degrees of leveling adjustment post installation. To adjust the level of the TV, place a bubble level on top of the TV, loosen the 2 x G bolts located behind the VESA plate, level the TV, and tighten the 2 x G bolts to lock the TV in position.

Atunṣe tẹlọrun -5 ° - +10 °

The mount can tilt down up to 10 degrees and up 5 degrees. To adjust the tilt angle of the TV, pull out the tilt adjustment levers on both sides of the mount and turn counterclockwise to loosen the screws. Adjust the tilt to the desired angle and turn the tilt adjustment lever clockwise to tighten the screws.

AKIYESI: IF THE TV TILTS DOWN AFTER A PERIOD OF USE, CHECK THE TILT ADJUSTMENT LEVER TIGHTNESS AND TIGHTEN IF NECESSARY.

Lo awọn agekuru iṣakoso okun iṣọpọ lori awọn apa lati da awọn kebulu si ẹhin tabi ẹgbẹ ti TV.

Iwọn

Kaadi ATILẸYIN ỌJA

AWỌN ỌMỌRỌ “™ Lopin Atilẹyin ọja

Multibrackets awọn iwe-aṣẹ re awọn ọja si be ofe of awọn abawọn in ohun elo ati iṣẹ-ṣiṣe fun awọn ọja Atilẹyin ọja Akoko.

Awọn Atilẹyin ọja akoko bẹrẹ on awọn atilẹba rira ọjọ of awọn ọja

Gbogbo Multibrackets awọn ọja ni bo by a lopin ọja atilẹyin ọja

• MARUN (5) odun fun irin fidio atẹle mounts, gbogbo agbekoati non-electrical agbeko ẹya ẹrọ
• MEJI (2) odun fun gaslifts ati sit-stand awọn ibudo iṣẹ
• ỌKAN (1) odun fun gbogbo motorized ati/tabi aládàáṣiṣẹ awọn ọja, ṣiṣu agbọrọsọ mounts, gbogbo agbọrọsọ stands, gbogbo aga, gbogboigi (MDF) ẹya ẹrọ

Fun atilẹyin ọja nperare ṣe nigba awọn Atilẹyin ọja Igba, OPOBIRAKETI yio ropo eyikeyi alebu awọn ọja apakan ofe of charge. Should a apakan on tirẹ Multibrackets ọja fail, Jowo ṣẹda anRMA irú on www.multibrackets.com/support si ṣe a atilẹyin ọjaBeere. We yio await tirẹ iwe aṣẹ ati lẹhinna discuss awọnisoro pẹlu iwo, ati lẹẹkan we confirm awọn ọja is labẹ ogunranty, we yio ọkọ oju omi rirọpo awọn ẹya ara si iwo. Eyi Lopin Atilẹyin ọjaṣe kii ṣe ideri awọn owo of yiyọ ati rirọpo alebu awọn awọn ẹya aralati tirẹ Multibrackets ọja. Nitorina, if tirẹ isoro nbeere atitunṣe technician, iwo gbọdọ sanwo eyikeyi ise sise awọn idiyele.

For warranty claims made during the Warranty Period, MULTI BRACKETS will replace any defective product part free of charge. Should a part of your Multibrackets product fail, please create an RMA case on www.multibrackets.com/support to make a warranty claim. We will await your documentation and then discuss the problem with you, and once we confirm the product is under warranty, we will ship replacement parts to you. This

Limited Warranty does not cover the costs of removing and replacing defective parts from your Multibrackets product. So, if your problem requires arepair technician, you must pay any labor charg.es This Limited Warranty extends only to the original purchaser of the product and is automatically void if your Multibrackets product is modified in any way, improperly installed, taxed beyond its stated weight capacity, or otherwise misused or abused.

All Multibrackets products are intended for indoor use only, and any outdoor use voids this Limited Warranty. The Limited Warranty for wall and ceiling mounts is void if the mount is moved from its initial installation. To the maximum extent permitted by applicable law, Multibrackets disclaims any other warranties, express or implied, including warranties of fitness for a particular purpose and warranties of merchantability. Multibrackets will not be liable for any damages whatsoever arising out of the use or inability to use itsproducts, even if Multibrackets has been advised of the possibility of such damages. To the maximum extent permitted by applicablelaw, Multibrackets disclaims any responsibility for incidental or consequential damages,

Multibrackets M Stockholm, Sweden 2016. www.multibrackets.com

The content of this manual is subject to Change wltheut further notice. The latest vers, on of this manual can be found online under the product name on the webojula: www.multibrackets.com