POWERPLUS Bird atokan itọnisọna
HOW TO BUILD YOUR OWN BIRD FEEDER
GATHER YOUR RECLAIME1 CUT FOUR
- BOARDS TO THE SAME LENGTH WOOD.
AND WIDTH.
SAND DOWN THE EDGES TO AVOID SPLINTERS.
- ASSEMBLE THE FRAME WITH SCREWS.
DRILL PILOT HOLES TO PREVENT THE WOOD FROM SPLITTING.
- CUT TWO BOARDS FOR THE RAISED EDGES…
ONE SHOULD BE SLIGHTLY WIDER, SO ADD THE THICKNESS OF THE BOARD TO ITS WIDTH. - AND ATTACHTHEM TO THE BASE.
CUT TWO TRIANGULAR PIECES.
AND SCREW THEM DOWN ONTO THE RAISED EDGES.
USE THE ROPE TO HANG YOUR FEEDER IN A SAFE SPOT…
AND FILL WITH TREATS!
© 2025 Powerplus – All rights reserved
Awọn iwe aṣẹ / Awọn orisun
 |
POWERPLUS Bird Feeder [pdf] Ilana itọnisọna Bird Feeder, Bird, Feeder |