Ile » PPI » PPI Zenex Plus Itọnisọna Olumulo Olumulo Ipilẹ Itumọ Olona-Idi 
PPI Zenex Plus Itọnisọna Olumulo Olumulo Ipilẹ Itumọ Olona-Idi
| Oṣiṣẹ OJU PARAMETERS |
| Awọn paramita |
Eto (Iye aiyipada) |
| Time Bẹrẹ pipaṣẹ >>Time Abort Òfin >> |
Bẹẹni Bẹẹkọ(Iyipada: Bẹẹkọ) |
| Àárín àkókò (H:M) >> |
0.00 si 500.00 (HH: MM) (aiyipada: 0.10) |
| Konturolu Ṣeto iye >> |
Ṣeto Lopin Lo si opin Setpoint HI (Aiyipada: 25.0) |
| LO Iyapa >> |
0.2 si 99.9 (Iyipada: 2.0) |
| HI Iyapa >> |
0.2 si 99.9 (Iyipada: 2.0) |
| Yi Ọrọigbaniwọle pada >> |
1 si 100 (Iyipada: 0) |
| Alabojuto> Tẹlentẹle paramita |
| Awọn paramita |
Eto (Iye aiyipada) |
| ID ẹrọ >> |
1 si 127 (Iyipada: 1) |
| Baud Oṣuwọn >> |
2400, 4800,9600, 19200,38400, 57600(Iyipada: 9600) |
| Iyatọ >> |
Ko si, Paapaa, Odd (Aiyipada: Ani) |
| Tẹlentẹle Kọ Gbigbanilaaye >> |
Bẹẹkọ Bẹẹni(Iyipada: Bẹẹkọ) |
| Alabojuto> SENSOR INPUT |
| Awọn paramita |
Eto (Iye aiyipada) |
| Aiṣedeede odo >> |
-50.0 si 50.0 (aiyipada: 0.0) |
| Alabojuto> Iṣakoso |
| Awọn paramita |
Eto (Iye aiyipada) |
| Tun >> |
Bẹẹni Bẹẹkọ(Iyipada: Bẹẹkọ) |
| Setpoint LO iye >> |
Fun Igbewọle Thermocouple :-200 lati Ṣeto Iwọn HI Iwọn Fun Iṣawọle RTD :-99.9 si Ṣeto Iwọn HI (Iyipada: 0.0) |
| Setpoint HI iye to >> |
Fun Input Thermocouple: Setpoint LO Limit to 9999 Fun Input RTD:Setpoint LO Limit to 600.0(Aiyipada: 600.0) |
| Kompere Setpoint >> |
0.0 si 100.0 (Iyipada: 45.0) |
| Compressor Hyst >> |
0.1 si 99.9 (Iyipada: 2.0) |
| Ooru Ctrl Action >> |
PID ON-PA(Aiyipada: PID) |
| Ooru Hyst >> |
0.1 si 99.9 (Iyipada: 0.2) |
| Ooru Nikan Iṣakoso |
Ooru + Itura Iṣakoso Zone: Nikan |
Ooru + Agbegbe Iṣakoso Itura: Meji |
| Iwọn Iwọn >>0.1 si 999.9 (Iyipada: 50.0) |
Iwọn Iwọn >>0.1 si 999.9 (Iyipada: 50.0) |
Cz Prop Band >> Iwọn Iwọn fun agbegbe Cool Pre-ogo 0.1 si 999.9 (Iyipada: 50.0) |
| Aago Integral >> 0 si 3600 iṣẹju-aaya (Ayipada: 100 iṣẹju-aaya) |
Aago Integral >> 0 si 3600 iṣẹju-aaya (Ayipada: 100 iṣẹju-aaya) |
Cz Integral Time >>Aago Integral fun Cool Pre-ašẹ agbegbe0 si 3600 iṣẹju-aaya (Ayipada: 100 iṣẹju-aaya) |
| Akoko itọsẹ >>0 si 600 iṣẹju-aaya (Ayipada: 16 iṣẹju-aaya) |
Akoko itọsẹ >>0 si 600 iṣẹju-aaya (Ayipada: 16 iṣẹju-aaya) |
Cz akoko itọsẹ >> Akoko itọsẹ fun Cool Pre-ju agbegbe 0 si 600 iṣẹju-aaya (Ayipada: 16 iṣẹju-aaya) |
| Ooru Nikan Iṣakoso |
Ooru + Itura Iṣakoso Zone: Nikan |
Ooru + Agbegbe Iṣakoso Itura: Meji |
| Akoko Yiyi >>0.5 si 100.0 iṣẹju-aaya (Ayipada: 10.0 iṣẹju-aaya) |
Akoko Yiyi >>0.5 si 100.0 iṣẹju-aaya (Ayipada: 10.0 iṣẹju-aaya) |
Hz Prop Band >> Iwọn Iwọn fun agbegbe Heat Pre-ašẹ agbegbe 0.1 si 999.9 (Iyipada: 50.0) |
| Overshoot dojuti >>Muu ṣiṣẹ (aiyipada: Muu ṣiṣẹ) |
Overshoot dojuti >>Muu ṣiṣẹ (aiyipada: Muu ṣiṣẹ) |
Hz Integral Time >>Aago Integral fun Ooru Pre-ašẹ agbegbe0 si 3600 iṣẹju-aaya (Ayipada: 100 iṣẹju-aaya) |
| Cutoff ifosiwewe >>1.0 si 2.0 iṣẹju-aaya (Ayipada: 1.2 iṣẹju-aaya) |
Cutoff ifosiwewe >>1.0 si 2.0 iṣẹju-aaya (Ayipada: 1.2 iṣẹju-aaya) |
Akoko itọsẹ Hz >> Akoko itọsẹ fun Ooru Pre-ašẹ agbegbe 0 si 600 iṣẹju-aaya (Ayipada: 16 iṣẹju-aaya) |
| Akoko Yiyi >>0.5 si 100.0 iṣẹju-aaya (Ayipada: 10.0 iṣẹju-aaya) |
| Overshoot dojuti >> Muu ṣiṣẹ (aiyipada: Muu ṣiṣẹ) |
| Cutoff ifosiwewe >>1.0 si 2.0 iṣẹju-aaya (Ayipada: 1.2 iṣẹju-aaya) |
| Abojuto> Ọrọigbaniwọle |
| Awọn paramita |
Eto (Iye aiyipada) |
| Yi Ọrọigbaniwọle pada >> |
1000 si 1999 (Iyipada: 123) |
| Alabojuto> Jade |
| Awọn paramita |
| Jade Ipo Iṣeto >> |
| FACTORY> SENSOR INPUT |
| Awọn paramita |
Eto (Iye aiyipada) |
| Iru titẹ sii >> |
Tọkasi Tabili 1 (aiyipada: RTD Pt100) |
| Filter Constant >> |
0.5 si 60.0 (Iyipada: 0.5) |
| FACTORY> Itaniji PARAMETERS |
| Awọn paramita |
Eto (Iye aiyipada) |
| Hysteresis >> |
0.1 si 99.9 (Iyipada: 0.2) |
| Idilọwọ >> |
Bẹẹni Bẹẹkọ(Iyipada: Bẹẹni) |
| FACTORY> gbigbona Cool Yiyan |
| Awọn paramita |
Eto (Iye aiyipada) |
| Ilana Iṣakoso >> |
Ooru nikan Itura Ooru + Itura(aiyipada: Ooru + Itura) |
| Ilana Iṣakoso: Itura Nikan |
| Idaduro akoko (aaya) >> |
0 si 1000 iṣẹju-aaya (aiyipada: iṣẹju-aaya 200) |
| Ilana Iṣakoso: Ooru + Itura |
| Konpireso nwon.Mirza >> |
ISIWAJU. PA OPO. LORI SP BAASED PV BAASED(Iyipada: SP BAASED) |
| ISIWAJU. LORI |
SP NIPA |
PV NIPA |
| AkokoIdaduro (aaya) >>0 si 1000 iṣẹju-aaya (aiyipada: iṣẹju-aaya 200) |
Aala Ṣeto Iye >>0.0 si 100.0 (Iyipada: 45.0) |
Compressor SP >>0.0 si 100.0 (Iyipada: 45.0) |
| Awọn agbegbe Iṣakoso >>Meji Nikan (Aiyipada: Nikan) |
AkokoIdaduro (aaya) >>0 si 1000 iṣẹju-aaya (aiyipada: iṣẹju-aaya 200) |
| AkokoIdaduro (aaya) >>0 si 1000 iṣẹju-aaya (aiyipada: iṣẹju-aaya 200) |
| FACTORY> Aago PARAMETERS |
| Awọn paramita |
Eto (Iye aiyipada) |
| Mu ṣiṣẹ >> |
Bẹẹkọ Bẹẹni(Iyipada: Bẹẹkọ) |
| Bẹrẹ Band >> |
0 si 999.9 (Iyipada: 0.5) |
| Idaduro nwon.Mirza >> |
Ko si Soke isalẹ Mejeeji (aiyipada: Ko si) |
| Mu Band >> |
0.1 si 999.9 (Iyipada: 0.5) |
| Ooru Paa >> |
Bẹẹkọ Bẹẹni(Iyipada: Bẹẹkọ) |
| Tutu Paa >> |
Bẹẹkọ Bẹẹni(Iyipada: Bẹẹkọ) |
| Igbapada agbara >> |
Yọ Tun bẹrẹ Tesiwaju (aiyipada: Tun bẹrẹ) |
| FACTORY> Ilẹkùn ŠI |
| Awọn paramita |
Eto (Iye aiyipada) |
| Mu ṣiṣẹ >> |
Bẹẹni Bẹẹkọ(Iyipada: Bẹẹkọ) |
| Yipada Logic >> |
Pade: Ilẹkun Ṣii: Ṣii ilẹkun (aiyipada: sunmọ: Ṣii ilẹkun) |
| Ilekun Alrm Dly (aaya) >> |
0 si 1000 iṣẹju-aaya (aiyipada: iṣẹju-aaya 60) |
| FACTORY> Ọrọigbaniwọle |
| Awọn paramita |
Eto (Iye aiyipada) |
| Yi Ọrọigbaniwọle pada >> |
2000 si 2999 (Iyipada: 321) |
| Ile-iṣẹ > Aiyipada ile ise |
| Awọn paramita |
Eto (Iye aiyipada) |
| Ṣeto si Aiyipada >> |
Bẹẹni Bẹẹkọ(Iyipada: Bẹẹkọ) |
| FACTORY> Jade |
| Awọn paramita |
| Jade Ipo Iṣeto >> |
| TABI 1 |
| Aṣayan |
Ibiti (min. si Max.) |
O ga & Unit |
| Iru J (Fe-K) |
0.0 si +960.0°C |
1 °C |
| Iru K (Cr-Al) |
-200.0 to +1376.0°C |
| Iru T (Cu-Con) |
-200.0 to +387.0°C |
| Iru R (Rh-13%) |
0.0 si +1771.0°C |
| Iru S (Rh-10%) |
0.0 si +1768.0°C |
| Iru B |
0.0 si +1826.0°C |
| Iru N |
0.0 si +1314.0°C |
| Ni ipamọ fun iru alabara kan pato Thermocouple ko ni akojọ loke. Iru yoo wa ni pato ni ibamu pẹlu aṣẹ (iyan lori ìbéèrè) Thermocouple Iru. |
| RTD PT100 |
-99.9 to +600.0°C |
0.1 °C |
| Awọn itọkasi aṣiṣe PV |
| Ifiranṣẹ |
Iru aṣiṣe |
Nitori |
| SISI |
Sensọ Ṣii |
RTD Pt100 / Thermocouple ti bajẹ / Ṣii |
| OVR |
Ju-ibiti o |
Iwọn otutu ju Max. Specified Range |
| UNR |
Labẹ-ibiti o |
Iwọn otutu ni isalẹ Min. Specified Range |
| IWAJU PANEL bọtini |
| Aami |
Bọtini |
Išẹ |
 |
Yi lọ |
Tẹ lati yi lọ nipasẹ ọpọlọpọ Awọn oju iboju Alaye ilana ni Ipo Isẹ deede. |
 |
Itaniji Ijẹwọgba |
Tẹ lati jẹwọ ati dakẹ (ti o ba ṣiṣẹ) iṣẹjade itaniji. |
 |
SILE |
Tẹ lati dinku iye paramita. Titẹ lẹẹkan dinku iye nipasẹ kika kan; fifi titẹ ni iyara soke iyipada. |
 |
UP |
Tẹ lati mu iye paramita pọ si. Titẹ ni ẹẹkan mu iye pọ si nipasẹ kika kan; fifi titẹ ni iyara soke iyipada. |
 |
ṢETO |
Tẹ lati tẹ tabi jade ni ipo iṣeto. |
 |
WOLE |
Tẹ lati tọju iye paramita ti a ṣeto ati lati yi lọ si paramita atẹle. |
itanna awọn isopọ
| Oṣiṣẹ OJU PARAMETERS |
| Awọn paramita |
Eto (Iye aiyipada) |
| Time Bẹrẹ pipaṣẹ >>Time Abort Òfin >> |
Bẹẹni Bẹẹkọ(Iyipada: Bẹẹkọ) |
| Àárín àkókò (H:M) >> |
0.00 si 500.00 (HH: MM) (aiyipada: 0.10) |
| Konturolu Ṣeto iye >> |
Ṣeto Lopin Lo si opin Setpoint HI (Aiyipada: 25.0) |
| LO Iyapa >> |
0.2 si 99.9 (Iyipada: 2.0) |
| HI Iyapa >> |
0.2 si 99.9 (Iyipada: 2.0) |
| Yi Ọrọigbaniwọle pada >> |
1 si 100 (Iyipada: 0) |
| Alabojuto> SENSOR INPUT |
| Awọn paramita |
Eto (Iye aiyipada) |
| Aiṣedeede odo >> |
-50.0 si 50.0 (aiyipada: 0.0) |
| Alabojuto> Tẹlentẹle paramita |
| Awọn paramita |
Eto (Iye aiyipada) |
| ID ẹrọ >> |
1 si 127 (Iyipada: 1) |
| Baud Oṣuwọn >> |
2400, 4800,9600, 19200,38400, 57600(Iyipada: 9600) |
| Iyatọ >> |
Ko si, Paapaa, Odd (Aiyipada: Ani) |
| Tẹlentẹle Kọ Gbigbanilaaye >> |
Bẹẹkọ Bẹẹni(Iyipada: Bẹẹkọ) |
| Alabojuto> Iṣakoso |
| Awọn paramita |
Eto (Iye aiyipada) |
| Tun >> |
Bẹẹni Bẹẹkọ(Iyipada: Bẹẹkọ) |
| Setpoint LO iye >> |
Fun Igbewọle Thermocouple :-200 lati Ṣeto Iwọn HI Iwọn Fun Iṣawọle RTD :-99.9 si Ṣeto Iwọn HI (Iyipada: 0.0) |
| Setpoint HI iye to >> |
Fun Input Thermocouple: Setpoint LO Limit to 9999 Fun Input RTD:Setpoint LO Limit to 600.0(Aiyipada: 600.0) |
| Kompere Setpoint >> |
0.0 si 100.0 (Iyipada: 45.0) |
| Compressor Hyst >> |
0.1 si 99.9 (Iyipada: 2.0) |
| Ooru Ctrl Action >> |
PID ON-PA(Aiyipada: PID) |
| Ooru Hyst >> |
0.1 si 99.9 (Iyipada: 0.2) |
| Ooru Nikan Iṣakoso |
Ooru + Itura Iṣakoso Zone: Nikan |
Ooru + Agbegbe Iṣakoso Itura: Meji |
| Iwọn Iwọn >>0.1 si 999.9 (Iyipada: 50.0) |
Iwọn Iwọn >>0.1 si 999.9 (Iyipada: 50.0) |
Cz Prop Band >> Iwọn Iwọn fun agbegbe Cool Pre-ogo 0.1 si 999.9 (Iyipada: 50.0) |
| Aago Integral >> 0 si 3600 iṣẹju-aaya (Ayipada: 100 iṣẹju-aaya) |
Aago Integral >> 0 si 3600 iṣẹju-aaya (Ayipada: 100 iṣẹju-aaya) |
Cz Integral Time >>Aago Integral fun Cool Pre-ašẹ agbegbe0 si 3600 iṣẹju-aaya (Ayipada: 100 iṣẹju-aaya) |
| Akoko itọsẹ >>0 si 600 iṣẹju-aaya (Ayipada: 16 iṣẹju-aaya) |
Akoko itọsẹ >>0 si 600 iṣẹju-aaya (Ayipada: 16 iṣẹju-aaya) |
Cz akoko itọsẹ >> Akoko itọsẹ fun Cool Pre-ju agbegbe 0 si 600 iṣẹju-aaya (Ayipada: 16 iṣẹju-aaya) |
| Ooru Nikan Iṣakoso |
Ooru + Itura Iṣakoso Zone: Nikan |
Ooru + Agbegbe Iṣakoso Itura: Meji |
| Akoko Yiyi >>0.5 si 100.0 iṣẹju-aaya (Ayipada: 10.0 iṣẹju-aaya) |
Akoko Yiyi >>0.5 si 100.0 iṣẹju-aaya (Ayipada: 10.0 iṣẹju-aaya) |
Hz Prop Band >> Iwọn Iwọn fun agbegbe Heat Pre-ašẹ agbegbe 0.1 si 999.9 (Iyipada: 50.0) |
| Overshoot dojuti >>Muu ṣiṣẹ (aiyipada: Muu ṣiṣẹ) |
Overshoot dojuti >>Muu ṣiṣẹ (aiyipada: Muu ṣiṣẹ) |
Hz Integral Time >>Aago Integral fun Ooru Pre-ašẹ agbegbe0 si 3600 iṣẹju-aaya (Ayipada: 100 iṣẹju-aaya) |
| Cutoff ifosiwewe >>1.0 si 2.0 iṣẹju-aaya (Ayipada: 1.2 iṣẹju-aaya) |
Cutoff ifosiwewe >>1.0 si 2.0 iṣẹju-aaya (Ayipada: 1.2 iṣẹju-aaya) |
Akoko itọsẹ Hz >> Akoko itọsẹ fun Ooru Pre-ašẹ agbegbe 0 si 600 iṣẹju-aaya (Ayipada: 16 iṣẹju-aaya) |
| Akoko Yiyi >>0.5 si 100.0 iṣẹju-aaya (Ayipada: 10.0 iṣẹju-aaya) |
| Overshoot dojuti >> Muu ṣiṣẹ (aiyipada: Muu ṣiṣẹ) |
| Cutoff ifosiwewe >>1.0 si 2.0 iṣẹju-aaya (Ayipada: 1.2 iṣẹju-aaya) |
| Abojuto> Ọrọigbaniwọle |
| Awọn paramita |
Eto (Iye aiyipada) |
| Yi Ọrọigbaniwọle pada >> |
1000 si 1999 (Iyipada: 123) |
| Alabojuto> Jade |
| Awọn paramita |
Eto (Iye aiyipada) |
| Jade Ipo Iṣeto >> |
Bẹẹni Bẹẹkọ(Iyipada: Bẹẹkọ) |
| FACTORY> SENSOR INPUT |
| Awọn paramita |
Eto (Iye aiyipada) |
| Iru titẹ sii >> |
Tọkasi Tabili 1 (aiyipada: RTD Pt100) |
| Filter Constant >> |
0.5 si 60.0 (Iyipada: 0.5) |
| FACTORY> Itaniji PARAMETERS |
| Awọn paramita |
Eto (Iye aiyipada) |
| Hysteresis >> |
0.1 si 99.9 (Iyipada: 0.2) |
| Idilọwọ >> |
Bẹẹni Bẹẹkọ(Iyipada: Bẹẹni) |
| FACTORY> gbigbona Cool Yiyan |
| Awọn paramita |
Eto (Iye aiyipada) |
| Ilana Iṣakoso >> |
Ooru nikan Itura Ooru + Itura(aiyipada: Ooru + Itura) |
| Ilana Iṣakoso: Itura Nikan |
| Idaduro akoko (aaya) >> |
0 si 1000 iṣẹju-aaya (aiyipada: iṣẹju-aaya 200) |
| Ilana Iṣakoso: Ooru + Itura |
| Konpireso nwon.Mirza >> |
ISIWAJU. PA OPO. LORI SP BAASED PV BAASED(Aiyipada: TARA. LORI) |
| ISIWAJU. LORI |
SP NIPA |
PV NIPA |
| AkokoIdaduro (aaya) >>0 si 1000 iṣẹju-aaya (aiyipada: iṣẹju-aaya 200) |
Aala Ṣeto Iye >>0.0 si 100.0 (Iyipada: 45.0) |
Compressor SP >>0.0 si 100.0 (Iyipada: 45.0) |
| Awọn agbegbe Iṣakoso >>Meji Nikan (Aiyipada: Nikan) |
AkokoIdaduro (aaya) >>0 si 1000 iṣẹju-aaya (aiyipada: iṣẹju-aaya 200) |
| AkokoIdaduro (aaya) >>0 si 1000 iṣẹju-aaya (aiyipada: iṣẹju-aaya 200) |
| FACTORY> Aago PARAMETERS |
| Awọn paramita |
Eto (Iye aiyipada) |
| Mu ṣiṣẹ >> |
Bẹẹkọ Bẹẹni(Iyipada: Bẹẹkọ) |
| Bẹrẹ Band >> |
0 si 999.9 (Iyipada: 0.5) |
| Idaduro nwon.Mirza >> |
Ko si Soke isalẹ Mejeeji (aiyipada: Ko si) |
| Mu Band >> |
0.1 si 999.9 (Iyipada: 0.5) |
| Ooru Paa >> |
Bẹẹkọ Bẹẹni(Iyipada: Bẹẹkọ) |
| Tutu Paa >> |
Bẹẹkọ Bẹẹni(Iyipada: Bẹẹkọ) |
| Igbapada agbara >> |
Yọ Tun bẹrẹ Tesiwaju (aiyipada: Tun bẹrẹ) |
| FACTORY> Ilẹkùn ŠI |
| Awọn paramita |
Eto (Iye aiyipada) |
| Mu ṣiṣẹ >> |
Bẹẹni Bẹẹkọ(Iyipada: Bẹẹkọ) |
| Yipada Logic >> |
Pade: Ilẹkun Ṣii: Ṣii ilẹkun (aiyipada: sunmọ: Ṣii ilẹkun) |
| Ilekun Alrm Dly (aaya) >> |
0 si 1000 iṣẹju-aaya (aiyipada: iṣẹju-aaya 60) |
| FACTORY> Ọrọigbaniwọle |
| Awọn paramita |
Eto (Iye aiyipada) |
| Yi Ọrọigbaniwọle pada >> |
2000 si 2999 (Iyipada: 321) |
| Ile-iṣẹ > Aiyipada ile ise |
| Awọn paramita |
Eto (Iye aiyipada) |
| Ṣeto si Aiyipada >> |
Bẹẹni Bẹẹkọ(Iyipada: Bẹẹkọ) |
| FACTORY> Jade |
| Awọn paramita |
Eto (Iye aiyipada) |
| Jade Ipo Iṣeto >> |
Bẹẹni Bẹẹkọ(Iyipada: Bẹẹkọ) |
| TABI 1 |
| Aṣayan |
Ibiti (min. si Max.) |
O ga & Unit |
| Iru J (Fe-K) |
0.0 si +960.0°C |
1 °C |
| Iru K (Cr-Al) |
-200.0 to +1376.0°C |
| Iru T (Cu-Con) |
-200.0 to +387.0°C |
| Iru R (Rh-13%) |
0.0 si +1771.0°C |
| Iru S (Rh-10%) |
0.0 si +1768.0°C |
| Iru B |
0.0 si +1826.0°C |
| Iru N |
0.0 si +1314.0°C |
| Ni ipamọ fun iru alabara kan pato Thermocouple ko ni akojọ loke. Iru yoo wa ni pato ni ibamu pẹlu aṣẹ (iyan lori ìbéèrè) Thermocouple Iru. |
| RTD PT100 |
-99.9 to +600.0°C |
0.1 °C |
| Awọn itọkasi aṣiṣe PV |
| Ifiranṣẹ |
Iru aṣiṣe |
Nitori |
| SISI |
Sensọ Ṣii |
RTD Pt100 / Thermocouple ti bajẹ / Ṣii |
| OVR |
Ju-ibiti o |
Iwọn otutu ju Max. Specified Range |
| UNR |
Labẹ-ibiti o |
Iwọn otutu ni isalẹ Min. Specified Range |
| IWAJU PANEL bọtini |
| Aami |
Bọtini |
Išẹ |
|
Yi lọ |
Tẹ lati yi lọ nipasẹ ọpọlọpọ Awọn oju iboju Alaye ilana ni Ipo Isẹ deede. |
|
Itaniji Ijẹwọgba |
Tẹ lati jẹwọ ati dakẹ (ti o ba ṣiṣẹ) iṣẹjade itaniji. |
|
SILE |
Tẹ lati dinku iye paramita. Titẹ lẹẹkan dinku iye nipasẹ kika kan; fifi titẹ ni iyara soke iyipada. |
|
UP |
Tẹ lati mu iye paramita pọ si. Titẹ ni ẹẹkan mu iye pọ si nipasẹ kika kan; fifi titẹ ni iyara soke iyipada. |
|
ṢETO |
Tẹ lati tẹ tabi jade ni ipo iṣeto. |
|
WOLE |
Tẹ lati tọju iye paramita ti a ṣeto ati lati yi lọ si paramita atẹle. |
itanna awọn isopọ
Atilẹyin
101, Ohun-ini Ile-iṣẹ Diamond, Navghar,
Vasai Road (E), Dist. Palghar – 401 210.
Titaja : 8208199048 / 8208141446
Atilẹyin : 07498799226 / 08767395333
E: sales@ppiindia.net, support@ppiindia.net
Awọn iwe aṣẹ / Awọn orisun
Awọn itọkasi
