RICE LAKE 1280 Indicator Programmable Weight Indicator and Controller
Awọn pato
Awọn ibeere agbara
Bus Adapter Card with Modbus TCP Module, DC Power
- Ipese Voltage 6 VDC
- Lọwọlọwọ Fa 100 mA
- Iyaworan ti o pọju lọwọlọwọ 300 mA
- Agbara Agbara 1.8 W
Awọn ibaraẹnisọrọ ibaraẹnisọrọ
- Yiyi-bata cabling soke si 100Mbits/s
Awọn pato Ayika
- Iwọn otutu
- Ifọwọsi 14° si 104°F (-10° si 40°C)
- Ṣiṣẹ -4° si 131°F (-20° si 55°C)
- Ibamu
Awọn ilana Lilo ọja
Fifi sori ẹrọ
Follow the installation instructions provided in the manual to install the Modbus TCP Interface inside the indicator enclosure. Ensure the indicator is placed in a suitable NEMA Type 4X stainless steel enclosure for washdown environments.
Ṣiṣeto Awọn Eto Nẹtiwọọki
Refer to section 3.0 of the manual for detailed instructions on configuring the network settings for the Modbus TCP Interface.
Awọn aṣẹ
Section 4.0 provides information on output data format, byte swapping, and command descriptions. Familiarize yourself with these commands to effectively communicate with the indicator using the Modbus TCP Interface.
AKIYESI Ibaramu:
Ti kaadi ko ba sọrọ data to pe mọ, yi paramita SWAP pada si “BYTE” ninu itọka naa
- © Rice Lake Iwọn Systems. Gbogbo awọn ẹtọ wa ni ipamọ.
- Rice Lake Weighing Systems® jẹ aami-iṣowo ti a forukọsilẹ ti Rice Lake Weighing Systems.
- Gbogbo ami iyasọtọ miiran tabi awọn orukọ ọja laarin atẹjade yii jẹ aami-iṣowo tabi aami-iṣowo ti a forukọsilẹ ti awọn ile-iṣẹ wọn.
- Gbogbo alaye ti o wa ninu iwejade yii jẹ, si ti o dara julọ ti imọ wa, pipe ati deede ni akoko ti atẹjade. Rice Lake Weighing Systems ni ẹtọ lati ṣe awọn ayipada si imọ-ẹrọ, awọn ẹya, awọn pato ati apẹrẹ ti ẹrọ laisi akiyesi.
- Ẹya lọwọlọwọ julọ ti ikede yii, sọfitiwia, famuwia ati gbogbo awọn imudojuiwọn ọja miiran ni a le rii lori wa webojula: www.ricelake.com
Àtúnyẹwò History
Abala yii n ṣapejuwe ati ṣe apejuwe awọn atunyẹwo afọwọṣe fun imọ ti awọn imudojuiwọn pataki.
| Àtúnyẹwò | Ọjọ | Apejuwe |
| G | Oṣu Kẹta Ọjọ 29, Ọdun 2024 | Established revision history; Added first and second generation option card details |
Tabili i. Àtúnyẹwò Lẹta History
Awọn idanileko ikẹkọ imọ-ẹrọ wa nipasẹ Rice Lake Weighing Systems. Awọn apejuwe dajudaju ati awọn ọjọ le jẹ viewed ni www.ricelake.com/training tabi gba nipa pipe 715-234-9171 ati béèrè fun awọn ikẹkọ Eka.
Ọrọ Iṣaaju
- The Modbus TCP Interface can be used to read and write data to the indicator using a PLC or another primary controller. This manual provides information for installation and use of this product.
- The Modbus TCP Interface is installed inside the indicator enclosure and installation in NEMA Type 4X stainless steel enclosures permits use in washdown environments.
- See the indicator technical manual for additional installation information and detailed descriptions of indicator functions.
IKILO: Some procedures described in this manual require work inside the indicator enclosure. These procedures are to be performed by qualified service personnel only.
- Awọn iwe afọwọkọ ati awọn orisun afikun wa lori Awọn Eto Iwọn Rice Lake webojula ni www.ricelake.com
- Alaye atilẹyin ọja le ṣee ri lori awọn webojula ni www.ricelake.com/warranties
Pariview
The primary controller communicates by sending commands through the Modbus TCP Interface to the indicator. The indicator responds to the primary controller with data and status depending on the command sent. These actions are referred to as polled response.
FCC Ibamu
Orilẹ Amẹrika
Ohun elo yii ti ni idanwo ati rii lati ni ibamu pẹlu awọn opin fun ẹrọ oni-nọmba Kilasi A, ni ibamu si Apá 15 ti Awọn ofin FCC. Awọn opin wọnyi jẹ apẹrẹ lati pese aabo to bojumu lodi si kikọlu ipalara nigbati ohun elo ba ṣiṣẹ ni agbegbe iṣowo kan. Ẹrọ yii n ṣe ipilẹṣẹ, nlo, ati pe o le tan agbara ipo igbohunsafẹfẹ redio ati, ti ko ba fi sii ati lo ni ibamu pẹlu itọnisọna itọnisọna, o le fa kikọlu ipalara si awọn ibaraẹnisọrọ redio. Ṣiṣẹ ohun elo yii ni agbegbe ibugbe le fa kikọlu ipalara ninu eyiti olumulo yoo nilo lati ṣe atunṣe kikọlu naa ni inawo tirẹ.
Canada
Ohun elo oni-nọmba yii ko kọja awọn opin Kilasi A fun awọn itujade ariwo redio lati ohun elo oni-nọmba ti a ṣeto sinu Awọn Ilana kikọlu Redio ti Ẹka Awọn ibaraẹnisọrọ ti Ilu Kanada.
Fifi sori ẹrọ
- Modbus TCP Interface specific functions are provided by a Modbus TCP module.
- Awọn module pilogi sinu ohun-ìmọ Iho lori awọn Sipiyu ọkọ ati ki o pese agbara ati wiwọle lati awọn Atọka akero si awọn module.
- PATAKI: See the indicator technical manual for installation instructions.
- Awọn kaadi aṣayan wiwo ti atọka 1280 Idawọlẹ Series pin igbimọ ti ngbe kanna (PN 164756). Awọn ọkọ ti ngbe pilogi sinu ohun-ìmọ Iho lori Sipiyu ọkọ ati ki o pese agbara ati wiwọle lati awọn Atọka akero si awọn module. Awọn ohun elo kaadi aṣayan wiwo 1280 ti wa ni gbigbe pẹlu module ati igbimọ ti ngbe ti ṣajọpọ tẹlẹ.
| Iran kaadi | Idamo Abuda |
| Iran akọkọ | alawọ ewe ọkọ |
| Iran keji | blue board, push button |
Table 2-1. Alaye Idanimọ Kaadi Aṣayan
AKIYESI: Only second-generation cards (blue boards) can have the firmware updated. See the 1280 Enterprise Technical Manual (PN 167659) for further instructions.
- Atọka laifọwọyi da gbogbo awọn kaadi aṣayan ti a fi sii sori ẹrọ nigbati ẹrọ ba wa ni titan. Ko si hardware-kan pato iṣeto ni ti a beere lati da a fi sori ẹrọ kaadi si awọn eto.
- IKILO: Always disconnect the power before opening an enclosure.
- Interface option cards are not hot swappable.
- IKIRA: Okùn ọrun ọwọ ilẹ gbọdọ wa ni wọ lati daabobo awọn paati lati itujade elekitirotatiki (ESD) nigbati o ba n ṣiṣẹ inu apade tabi apejọ oludari.
Awọn ilana fifi sori ẹrọ
- Ge asopọ agbara si atọka.
- Wo itọnisọna imọ-ẹrọ 1280 (PN 167659) lati ni iraye si apoti Apejọ Alakoso fun awoṣe kan pato.
- Yọ dabaru ni ifipamo awọn ti a ti pinnu Iho ideri awo apoti Adarí Apejọ, ṣeto awọn Iho ideri awo akosile ki o si fi awọn dabaru.
- Gbe awọn faceplate lori module ati ifaworanhan module ọkọ ijọ sinu ibi laarin awọn Iho.
- Ṣe aabo iboju oju ati apejọ igbimọ module sinu aaye pẹlu dabaru ti a ti yọ tẹlẹ.
AKIYESI: USB Interface ti wa ni ipa nipasẹ okun dimu ni Universal ati Odi òke enclosures.
Ni omiiran, asopọ ti o gbe ẹnjini kan le fi sori ẹrọ ni apade naa. - Wo itọnisọna imọ-ẹrọ 1280 lati tun fi apoti Apejọ Adarí sori ẹrọ.
LED Ipo Ifi
An LED array on the Modbus TCP Interface module provides status information for troubleshooting.
AKIYESI: A test sequence is performed on this LED 1 and 2 during startup.
Ipo Nẹtiwọọki LED (Nkan 1)
| Ipinle LED | Apejuwe |
| Paa | Ko si agbara tabi ko si adiresi IP |
| Alawọ ewe | Module wa ni Iṣiṣẹ lọwọ tabi ipo Aiṣiṣẹ |
| Alawọ ewe, ìmọlẹ | Nduro fun awọn asopọ |
| Pupa | Àdírẹ́ẹ̀sì IP àdáwòkọ, ìṣẹ̀lẹ̀ FATAL |
| Pupa, didan | Akoko Iṣiṣẹ lọwọ |
LED Ipo Module (Nkan 2)
| Ipinle LED | Apejuwe |
| Paa | Ko si agbara |
| Alawọ ewe | Iṣiṣẹ deede |
| Pupa | Major fault; Module is in state EXCEPTION (or FATAL event) |
| Pupa, didan | Minor fault in diagnostic object; IP conflict |
LED ọna asopọ/Aṣẹ iṣẹ (Nkan 3)
| Ipinle LED | Apejuwe |
| Paa | Ko si ọna asopọ, ko si aṣayan iṣẹ-ṣiṣe |
| Alawọ ewe | Ọna asopọ ti iṣeto |
| Green, Flickering | Iṣẹ-ṣiṣe |
Table 2-4. Link / aṣayan iṣẹ-ṣiṣe LED
Ibudo RJ45 (Nkan 4)
The Modbus TCP interface supports 10/100Mbit, full or half duplex operation.
1280 Modbus TCP Interface
Ṣiṣeto Awọn Eto Nẹtiwọọki
Ṣiṣeto eto nẹtiwọọki jẹ ṣiṣe ni lilo a web browser or the Anybus IP configuration utility. To set the network settings using a web kiri ayelujara.
- Ṣii ẹrọ aṣawakiri kan ki o tẹ adiresi IP ti kaadi naa.
- Yi eyikeyi tabi gbogbo eto pada.
- Click on Store settings.
Lati ṣeto awọn eto nẹtiwọki nipa lilo Anybus IP iṣeto ni eto.
- Open the configuration program.
AKIYESI: The configuration program can be found at the following link: https://www.ricelake.com/media/rbuicpx3/tb-us-197149-ipconfig.pdf - Tẹ bọtini ọlọjẹ ti ẹrọ ko ba han ninu akojọ aṣayan.
- Tẹ lẹẹmeji lori ẹrọ naa. Akojọ aṣayan yoo han pẹlu awọn eto nẹtiwọki lọwọlọwọ.
- Yi eyikeyi tabi gbogbo eto pada.
- Tẹ bọtini Ṣeto.
Awọn aṣẹ
Awọn aṣẹ jẹ lilo nipasẹ ẹrọ akọkọ lati firanṣẹ ati gba data lati wiwo bi odidi tabi data aaye lilefoofo. Alakoko nfi awọn baiti mẹjọ ranṣẹ ni ọna kika lati kọ awọn aṣẹ si atọka ati ka awọn baiti mẹjọ ni ọna kika titẹ sii lati ka data lati itọka naa.
Ojuami eleemewa mimu
Integer commands return no decimal point information to the primary. For example, iye kan ti 750.1 ti o han lori itọka ti pada si akọkọ bi 7501. Awọn pipaṣẹ aaye lilefoofo ṣe atilẹyin alaye aaye eleemewa laisi mimu pataki.
O wu Data kika
Lati ṣe aṣẹ kan, akọkọ lo ọna kika aṣẹ ti o wu lati firanṣẹ awọn ọrọ 16-bit mẹrin si wiwo. Awọn ọrọ mẹrin wọnyi ni aṣẹ ati awọn aye pataki lati ṣiṣẹ. O wu pipaṣẹ kika ti han ni Table 4-1.
|
Baiti |
Forukọsilẹ
V 1.02 and Earlier |
Forukọsilẹ
V 1.03 and Later |
Apejuwe |
| Baiti 0 | 40005 | 40001 | Nọmba aṣẹ |
| Baiti 1 | |||
| Baiti 2 | 40006 | 40002 | Paramita |
| Baiti 3 | |||
| Baiti 4 | 40007 | 40003 | Iye (MSW) |
| Baiti 5 | |||
| Baiti 6 | 40008 | 40004 | Iye (LSW) |
| Baiti 7 |
tabili 4-1. 1280 O wu Data kika
AKIYESI:Wo Abala 4.1.1 loju iwe 15 fun awọn aye iyipada BYTE.
- Ẹya titiipa kan, ti o dapọ si ẹrọ gbigba itọka, n wa iyipada ninu data kika ọnajade lati ṣe idiwọ inundation nipasẹ aṣẹ kanna.
- Wo awọn ofin ti o kan ti a ṣe akiyesi ni Tabili 4-2 ni oju-iwe 13 pẹlu (*).
- Awọn aṣẹ atunwi gbọdọ jẹ niya nipasẹ eyikeyi aṣẹ miiran ti o wulo/paramita/apapọ iye.
Paramita Iye
Ni ibaraẹnisọrọ pẹlu itọka iwọn-pupọ, nọmba iwọn ni a firanṣẹ ni ọrọ keji ti ọna kika pipaṣẹ. Odo (0) duro fun iwọn ti isiyi. Awọn pipaṣẹ kan nilo paramita kan yatọ si nọmba iwọn, gẹgẹbi nọmba Iho, nọmba ṣeto, tabi paramita yiyan miiran. Wo awọn apejuwe aṣẹ ni Abala 4.3 loju iwe 19 fun awọn ibeere aṣẹ kan pato.
Iye
Awọn ọrọ kẹta ati kẹrin ti ọna kika o wu ni a lo lati ṣe data iye lori awọn aṣẹ kan. Awọn iye ti a tẹ sinu awọn ọrọ wọnyi jẹ itọju bi awọn nọmba gigun ti ko forukọsilẹ tabi awọn iye aaye lilefoofo, da lori aṣẹ naa.
Nọmba aṣẹ
- Nọmba ti o nsoju aṣẹ atọka ni a firanṣẹ ni ọrọ akọkọ.
- Table 4-2 lists the commands that can be specified for indicators.
- Some commands may not be available on all indicators.
| Eleemewa | Hex | Òfin |
| 0 | 0x000 | Pada Ipo ati iwuwo (odidi) |
| 1 | 0x001 | Ifihan ikanni |
| 2 | 0x002 | Àpapọ̀ Ìwọ̀n Àdánù |
| 3 | 0x003 | Àpapọ Apapọ iwuwo |
| 9 | 0x009 | Titẹ bọtini Gross/Nẹtiwọọki (balu) |
| 10 | 0x00A | Odo* |
| 11 | 0x00B | Ṣe afihan Tare * |
| 12 | 0x00C | Wọle Tare* |
| 13 | 0x00D | Gba Tare* |
| 14 | 0x00E | Pa Tare* |
| 16 | 0x010 | Awọn ẹya akọkọ |
| 17 | 0x011 | Awọn Ẹka Atẹle |
| 18 | 0x012 | Awọn ile-ẹkọ giga |
| 19 | 0x013 | Tẹ bọtini awọn sipo (yipada awọn ẹya) |
| 20 | 0x014 | Print Ibere |
| 21 | 0x015 | Àpapọ Accumulator |
| 22 | 0x016 | Ko Accumulator kuro |
| 23 | 0x017 | Titari iwuwo si Accumulator |
| 32 | 0x020 | Pada Gross (odidi) |
| 33 | 0x021 | Pada Net (odidi) |
| 34 | 0x022 | Pada Tare (odidi) |
| 37 | 0x025 | Pada Ifihan lọwọlọwọ (odidi) |
| 38 | 0x026 | Akojopo pada (odidi) |
| 39 | 0x027 | Iwọn Ipadabọ ti Iyipada (odidi) |
| 95 | 0x05F | Ṣeto Batching State |
| 96 | 0x060 | Batch Bẹrẹ |
| 97 | 0x061 | Batch Duro |
| 98 | 0x062 | Atunto ipele |
| 99 | 0x063 | Ipele Ipo |
tabili 4-2. Latọna Àsẹ
| Eleemewa | Hex | Òfin |
| 112 | 0x070 | Titiipa Atọka Iwaju Panel |
| 113 | 0x071 | Ṣii Atọka Iwaju Panel |
| 114 | 0x072 | Ṣeto Ijade Digital ON |
| 115 | 0x073 | Ṣeto Digital o wu PA |
| 116 | 0x074 | Ka Digital I/O Ipo |
| 128 | 0x80 | Mu Olumudani aṣẹ Bosi ṣiṣẹ |
| 253 | 0x0FD | Ko si isẹ |
| 254 | 0x0FE | Atọka atunto |
| 256 | 0x100 | Pada Ipo ati iwuwo (leefofo) |
| 268 | 0x10C | Wọle Tare (leefofo) |
| 288 | 0x120 | Ka Gross (leefofo) |
| 289 | 0x121 | Ka Nẹtiwọọki (leefofo) |
| 290 | 0x122 | Ka Tare (leefofo) |
| 293 | 0x125 | Ka Ifihan lọwọlọwọ (leefofo) |
| 294 | 0x126 | Ka Accumulator (leefofo) |
| 295 | 0x127 | Ka Oṣuwọn iyipada (leefofo) |
| 304 | 0x130 | Ṣeto Iye Eto Eto (leefofo) |
| 305 | 0x131 | Ṣeto Hysteresis Setpoint (leefofo) |
| 306 | 0x132 | Ṣeto Bandiwidi Setpoint (leefofo) |
| 307 | 0x133 | Ṣeto Isọtẹlẹ Setpoint (leefofo) |
| 320 | 0x140 | Ka Iye Setpoint (leefofo) |
| 321 | 0x141 | Ka Setpoint Hysteresis (leefofo) |
| 322 | 0x142 | Ka bandiwidi Setpoint (leefofo) |
| 323 | 0x143 | Ka Setpoint Preact (leefofo) |
tabili 4-2. Awọn aṣẹ Latọna jijin (Tẹsiwaju)
BYTE iyipada
AKIYESI: Wo Akojọ aṣyn Ports ninu itọnisọna atọka.
- Atọka firanṣẹ ati gba data ni ọna kika odidi.
- Ọna kika boṣewa jẹ bi atẹle fun gbogbo igbewọle ati awọn iye iṣelọpọ:
- ByTE giga - Low BYTE
- Ti paramita FLDBUS/SWAP atọka ti ṣeto si BẸẸNI, lẹhinna aṣẹ BYTE yipada si:
- Kekere BYTE – ga BYTE
- Example: Ti o ba ti awọn àdánù lori asekale Say 10 lbs ati ki o kan iye ti 2560 ti han ni PLC, boya siwopu BYTES ni PLC tabi yi SWAP paramita to BẸẸNI.
Input Data kika
- Ni wiwo pada data ati alaye ipo si akọkọ bi awọn ọrọ 16-bit mẹrin ni idahun si aṣẹ kan. Ọna kika aṣẹ titẹ sii han ni Tabili 4-3.
- Iru iye le ṣee ṣeto fun awọn aṣẹ ti kii ṣe pato odidi tabi data aaye lilefoofo nipa fifiranṣẹ pipaṣẹ 0x000 lati pato data odidi, tabi fifiranṣẹ pipaṣẹ 0x100 lati ṣafihan data-ojuami lilefoofo. Iru iye naa ni a da pada ni ọrọ ipo (bit 14) ti ọna kika titẹ sii.
PATAKI: The register values for Carrier Board (PN 153093) changed with V 1.03 as shown in Table 4-3.
|
Baiti |
Forukọsilẹ
V 1.02 and Earlier |
Forukọsilẹ
V 1.03 and Later |
Apejuwe |
| Baiti 0 | 40001 | 40257 | Nọmba aṣẹ |
| Baiti 1 | |||
| Baiti 2 | 40002 | 40258 | Ipo |
| Baiti 3 | |||
| Baiti 4 | 40003 | 40259 | Iye (MSW) |
| Baiti 5 | |||
| Baiti 6 | 40004 | 40260 | Iye (LSW) |
| Baiti 7 |
tabili 4-3. 1280 Input Data kika
- Wo Abala 4.1.1 fun awọn aye iyipada BYTE.
Nọmba aṣẹ
Ọrọ akọkọ tun ṣe nọmba pipaṣẹ naa. Ti aṣẹ ba kuna tabi ko ṣe idanimọ, odi ti nọmba aṣẹ yoo pada si ifihan aṣiṣe naa.
Data ipo
Awọn data ipo Atọka ti pada ni ọrọ keji (Table 4-4). Awọn pipaṣẹ Batch da ipo ipele pada ni aaye baiti kekere (Table 4-5 loju iwe 17). Awọn pipaṣẹ Setpoint da ipo ipele pada ni baiti kekere ti ọrọ ipo ati nọmba ṣeto ninu baiti giga.
|
Ọrọ 2 Bit |
Atọka Ipo Data | |
| Iye=0 | Iye=1 | |
| 00 | Aṣiṣe ** | Ko si aṣiṣe |
| 01 | Tare ko wọle | Tare wọle |
| 02 | Ko aarin ti odo | Aarin ti odo |
| 03 | Ìwọ̀n tí kò tọ́ | Iwọn DARA |
| 04 | Iduroṣinṣin | Ni išipopada |
| 05 | Awọn ẹya akọkọ | Miiran sipo |
| 06 | Tare ko gba | Tare ti gba |
| 07 | Iwon girosi | Apapọ iwuwo |
| 08 |
Nọmba ikanni
AKIYESI: Iwọn pataki ti o kere julọ ni akọkọ. |
|
| 09 | ||
| 10 | ||
| 11 | ||
| 12 | ||
| 13 | Ko lo | |
| 14 | Odidi data | Lilefoofo ojuami data |
| 15 | Iwọn to dara | iwuwo odi |
| Ipo aṣiṣe yii ko tumọ si pe iwuwo ti a royin ko wulo. Tọkasi si "Ìwúwo invalid" bit. | ||
Table 4-4. Atọka Ipo Data kika
Awọn aṣiṣe Bit-0
- Aṣẹ PLC kuna lati ṣiṣẹ
- Ko si iṣeto ni o ti waye
- Paramita asekale ko si ni sakani
- Aṣiṣe titẹ ti ṣẹlẹ
- Aṣiṣe fifuye ti ṣẹlẹ
- Aṣiṣe iranti ti ṣẹlẹ
- Afọwọṣe si aṣiṣe oluyipada oni-nọmba
- Aṣiṣe Tare
- Aṣiṣe lori iwọn iwọn
- Iwọn labe aṣiṣe ibiti
- Aṣiṣe itaja iṣeto ti kii ṣe atunṣe
- Atọka ni ipo iṣeto ni
|
Ọrọ 2 Bit |
Ipele Ipò Data | |
| Iye=0 | Iye=1 | |
| 00 | Digital input 4 PA | Digital input 4 ON |
| 01 | Digital input 3 PA | Digital input 3 ON |
| 02 | Digital input 2 PA | Digital input 2 ON |
| 03 | Digital input 1 PA | Digital input 1 ON |
| 04 | Batch ko daduro | Batch daduro |
| 05 | Batch ko nṣiṣẹ | Batch nṣiṣẹ |
| 06 | Batch ko duro | Batch duro |
| 07 | Itaniji PA | Itaniji ON |
| 08 |
Nọmba iṣeto |
|
| 09 | ||
| 10 | ||
| 11 | ||
| 12 | ||
| 13 | Ko lo | |
| 14 | Odidi data | Lilefoofo ojuami data |
| 15 | Iwọn to dara | iwuwo odi |
Iye
Awọn data iwuwo pada si akọkọ ni awọn ọrọ kẹta ati kẹrin ti ọna kika aṣẹ titẹ sii, da lori aṣẹ ati iru iye. Data iwuwo ti o pada jẹ iwuwo ti o han lẹhin ti o ti ṣiṣẹ aṣẹ, ayafi ti aṣẹ naa ba sọ bibẹẹkọ. A odi iye ti wa ni pada ni awọn meji ká ekiki kika.
Eto a leefofo Iye
Ṣiṣeto iye leefofo loju omi ni aaye ṣeto nilo iye lati firanṣẹ ni awọn iye odidi meji lọtọ. Pupọ awọn PLC ni ẹrọ lati mu iye leefofo ki o ya sọtọ si awọn iye odidi.
Example: Awọn atẹle gbọdọ wa ni fifiranṣẹ ni awọn ọrọ iṣelọpọ lati ṣeto iye ti Setpoint #1 si 10000.
- Ọrọ aṣẹ = 304
- Ọrọ paramita = 1
- MSW = 17948
- LSW = 16384
Kika a leefofo Iye
Nigba ti a ba ka iye leefofo, yoo da pada ni odidi meji ti o nsoju iye leefofo. PLC gbọdọ darapọ awọn iye odidi MSW ati LSW pada sinu iye leefofo.
Example: Atẹle naa ni a da pada ninu awọn ọrọ titẹ sii ti iwuwo lori iwọn ba jẹ 800.5.
- Command Word = 288
- Status word = Scale status
- MSW= 17480
- LSW = 8192
Apejuwe pipaṣẹ
Ipo Pada ati iwuwo lọwọlọwọ bi odidi
- Ilana: 0, 0x000
- Paramita: Nọmba iwọn
- Command 0 returns the status and gross or net scale weight (per scale configuration) of the specified scale in integer format, without changing the display. This command also causes the format-
- independent commands to return a value in the integer format.
Ifihan ikanni
- Ilana: 1, 0x001
- Paramita: Nọmba iwọn
- Aṣẹ 1 jẹ ki iwuwo ti iwọn ti a sọ han lati han ati pada ni ipo lọwọlọwọ ati ọna kika.
Àpapọ̀ Ìwọ̀n Àdánù
- Ilana: 2, 0x002
- Paramita: Nọmba iwọn
- Aṣẹ 2 jẹ ki iwuwo iwuwo ti iwọn ti a sọ han lati han ati pada.
Àpapọ Apapọ iwuwo
- Ilana: 3, 0x003
Paramita: Nọmba iwọn - Aṣẹ 3 fa iwuwo apapọ ti iwọn ti a ti sọ lati han ati pada.
- Gross/Net Key Tẹ (Ipo Yipada)
- Ilana: 9, 0x009
Paramita: Nọmba iwọn - Command 9 toggles between gross and net mode (and count mode, if enabled). If a scale number other than 0 is specified, the action will not be seen until the specified scale is displayed.
Odo
- Ilana: 10, 0x00A
- Aṣẹ 10 ṣe iṣẹ ZERO lori iwọn lọwọlọwọ.
Ifihan Tare
- Àṣẹ: 11, 0x00B
- Paramita: Nọmba iwọn
- Aṣẹ 11 fa iwuwo tare lori iwọn ti a sọ lati han. Ti nọmba irẹjẹ miiran ju 0 ba ti wa ni pato, atọka akọkọ fa ki iwọn ti a sọ han lati han. Ifihan pada si ipo iṣaaju lẹhin ti o ṣayẹwo atọka naa.
Tẹ Tare (Integer)
- Àṣẹ: 12, 0x00C
- Paramita: Nọmba iwọn
- Iye: Tare àdánù
- Aṣẹ 12 wọ inu tare kan fun iwọn ti a yan. Tare data gbọdọ wa ni odidi kika.
- Atọka naa tẹsiwaju lati da data iwuwo pada ni ipo lọwọlọwọ fun iwọn ti a sọ.
Gba Tare (Ṣafarawe TARE Key Tẹ)
- Àṣẹ: 13, 0x00D
- Paramita: Nọmba iwọn
- Aṣẹ 13 gba tare kan ti o da lori iwuwo lọwọlọwọ lori iwọn ti a sọ.
- Atọka naa tẹsiwaju lati da data iwuwo pada ni ipo lọwọlọwọ fun iwọn ti a sọ.
Ko Tare
- Àṣẹ: 14, 0x00E
- Paramita: Nọmba iwọn
- Command 14 clears the tare for the specified scale.
- Atọka naa tẹsiwaju lati da data iwuwo pada ni ipo lọwọlọwọ fun iwọn ti a sọ.
Awọn ẹya akọkọ
- Ilana: 16, 0x010
- Paramita: Nọmba iwọn
- Aṣẹ 16 yipada ọna kika lọwọlọwọ ti iwọn ti a sọ si awọn ẹya akọkọ ti a tunto fun iwọn yẹn.
Awọn Ẹka Atẹle
- Ilana: 17, 0x011
- Paramita: Nọmba iwọn
- Pipaṣẹ 17 yipada ọna kika lọwọlọwọ ti iwọn ti a ti sọ si awọn apa keji ti a tunto fun iwọn yẹn.
Awọn ile-ẹkọ giga
- Ilana: 18, 0x012
- Paramita: Nọmba iwọn
- Aṣẹ 18 yipada ọna kika lọwọlọwọ ti iwọn ti a sọ si awọn ẹka ile-ẹkọ giga ti a tunto fun iwọn yẹn, ti o ba wa.
Tẹ bọtini Awọn ẹya (Yipada Awọn ẹya)
- Ilana: 19, 0x013
- Paramita: Nọmba iwọn
- Aṣẹ 19 yipada laarin awọn ẹya akọkọ ati awọn ipele keji ti iwọn ti a sọ.
Print Ibere
- Ilana: 20, 0x014
- Paramita: Nọmba iwọn
- Aṣẹ 20 jẹ ki olufihan lati ṣiṣẹ aṣẹ titẹ fun iwọn ti isiyi.
Àpapọ Accumulator
- Ilana: 21, 0x015
- Paramita: Nọmba iwọn
- Pipaṣẹ 21 fa iye ti ikojọpọ fun iwọn ti a sọtọ lati han ati pada. Aṣẹ yii wulo nikan nigbati ikojọpọ fun iwọnwọn pàtó kan ti ṣiṣẹ.
Ko Accumulator kuro
- Ilana: 22, 0x016
- Paramita: Nọmba iwọn
- Òfin 22 ko iye ti awọn accumulator fun awọn pàtó kan asekale.
- Aṣẹ yii wulo nikan nigbati ikojọpọ fun iwọnwọn pàtó kan ti ṣiṣẹ.
Titari iwuwo si Accumulator
- Ilana: 23, 0x017
- Paramita: Nọmba iwọn
- Command 23 adds the net weight on the specified scale to the value of the accumulator for the specified scale. The scale must return to net zero between accumulations.
- The indicator returns the accumulated weight data for the specified scale.
- Aṣẹ yii wulo nikan nigbati ikojọpọ fun iwọnwọn pàtó kan ti ṣiṣẹ.
Pada Gross bi odidi
- Ilana: 32, 0x020
- Paramita: Nọmba iwọn
- Pipaṣẹ 32 da iye iwuwo gross pada fun iwọn ti pàtó kan bi odidi kan.
Pada Net bi odidi
- Ilana: 33, 0x021
- Paramita: Nọmba iwọn
- Pipaṣẹ 33 da iye iwuwo apapọ pada fun iwọnwọn pàtó kan bi odidi kan.
Pada Tare bi odidi
- Ilana: 34, 0x022
- Paramita: Nọmba iwọn
- Pipaṣẹ 34 da iye iwuwo tare pada fun iwọn-ipin kan bi odidi kan.
Pada Ifihan lọwọlọwọ pada bi odidi
- Ilana: 37, 0x025
- Paramita: Nọmba iwọn
- Pipaṣẹ 37 da iye iwuwo pada fun iwọn ti a sọ bi o ti han lọwọlọwọ.
- Eyi le pẹlu gross, net, tare, tabi awọn iye akojo, bi o ti mu ṣiṣẹ.
Pada Accumulator bi odidi
- Ilana: 38, 0x026
- Paramita: Nọmba iwọn
- Pipaṣẹ 38 da iye ikojọpọ pada fun iwọn-iwọn pàtó kan.
- Aṣẹ yii wulo nikan nigbati ikojọpọ fun iwọnwọn pàtó kan ti ṣiṣẹ.
Pada Oṣuwọn ti Iyipada bi odidi
- Ilana: 39, 0x027
- Paramita: Nọmba iwọn
- Pipaṣẹ 39 da pada oṣuwọn lọwọlọwọ ti iye iyipada fun iwọn ti a sọ.
- Aṣẹ yii wulo fun 1280 nikan.
Ṣeto Batching State
- Àṣẹ: 95, 0x05F
- Paramita: Ipinle (0 = pipa; 1 = auto; 2 = Afowoyi)
- Command 95 sets the batching (BATCHNG) parameter. Indicator status is returned with the current weight for the last scale specified.
Batch Bẹrẹ
- Ilana: 96, 0x060
- Paramita: Nọmba iwọn
- Aṣẹ 96 bẹrẹ eto ipele kan lati igbesẹ lọwọlọwọ lẹhin iduro, da duro, tabi tunto. Ipele ipele ti wa ni pada pẹlu awọn ti isiyi àdánù fun awọn pàtó kan asekale.
Batch Duro
- Ilana: 97, 0x061
- Paramita: Nọmba iwọn
- Aṣẹ 97 da duro eto ipele kan ni igbesẹ lọwọlọwọ.
- Ipele ipele ti wa ni pada pẹlu awọn ti isiyi àdánù fun awọn pàtó kan asekale.
Atunto ipele
- Ilana: 98, 0x062
- Paramita: Nọmba iwọn
- Aṣẹ 98 da eto ipele duro ati tunto si ipele ipele akọkọ.
- Ipele ipele ti wa ni pada pẹlu awọn ti isiyi àdánù fun awọn pàtó kan asekale.
Ipele Ipo
- Ilana: 99, 0x063
- Paramita: Nọmba iwọn
- Aṣẹ 99 da pada ipo ti ipele kan. Ipele ipele ti wa ni pada pẹlu awọn ti isiyi àdánù fun awọn pàtó kan asekale.
Titiipa Iwaju Panel ti Atọka
- Ilana: 112, 0x070
- Paramita: Nọmba iwọn
- Aṣẹ 112 pa gbogbo awọn bọtini lori iwaju iwaju ti Atọka naa.
- Ipo Atọka ti wa ni pada pẹlu awọn ti isiyi àdánù fun awọn pàtó kan asekale.
Ṣii Igbimọ iwaju ti Atọka
- Ilana: 113, 0x071
- Paramita: Nọmba iwọn
- Aṣẹ 113 tun-ṣiṣẹ gbogbo awọn bọtini lori iwaju iwaju ti Atọka naa.
- Ipo Atọka ti wa ni pada pẹlu awọn ti isiyi àdánù fun awọn pàtó kan asekale.
Ṣeto Ijade Digital ON
- Ilana: 114, 0x072
- paramita: Iho nọmba
- Iye: Bit nọmba
- Òfin 114 ṣeto awọn pàtó kan oni o wu ON (lọwọ). Lo nọmba iho 0 fun awọn abajade oni-nọmba inu inu. Ipo Atọka ti wa ni pada pẹlu awọn ti isiyi àdánù fun awọn ti o kẹhin asekale pato.
Ṣeto Digital o wu PA
- Ilana: 115, 0x073
- paramita: Iho nọmba
- Iye: Bit nọmba
- Òfin 115 ṣeto awọn pàtó kan oni o wu PA (aisise). Lo nọmba iho 0 fun awọn abajade oni-nọmba inu inu. Ipo Atọka ti wa ni pada pẹlu awọn ti isiyi àdánù fun awọn ti o kẹhin asekale pato.
Ka Digital I/O
- Ilana: 116, 0x074
- paramita: Iho nọmba
- Òfin 116 pada ipo fun gbogbo awọn oni-nọmba ti mo ti / O ni awọn pàtó kan Iho ni awọn ọrọ 3 ati 4. Lo Iho nọmba 0 fun eewọ oni-nọmba ti mo ti / awọn. Ipo Atọka ti wa ni pada ni agbegbe ipo fun awọn ti o kẹhin asekale pato.
Mu Olumudani aṣẹ Bosi ṣiṣẹ
- Ilana: 128, 0x80
- Parameter: Kò
- Pipaṣẹ 128 jẹ ki olutọju aṣẹ bosi ni eto olumulo kan.
- Lakoko ti oluṣakoso yii ti ṣiṣẹ, gbogbo awọn aṣẹ PLC miiran jẹ alaabo.
Ko si isẹ
- Àṣẹ: 253, 0x0FD
- Paramita: Nọmba iwọn
- Aṣẹ 253 n pese aṣẹ lati lo laarin awọn iṣẹ ṣiṣe, bi o ṣe jẹ dandan, laisi fa itọkasi lati ṣe eyikeyi iṣe. Ipo Atọka ati iwuwo fun iwọn pàtó kan ti pada.
Atọka atunto
- Òfin: 254, 0x0FE
- Parameter: Kò
- Aṣẹ 254 n pese aṣẹ kan lati tun atọka to latọna jijin. Ko si data ti wa ni pada.
- Pada Ipo ati iwuwo lọwọlọwọ bi Lilefofo
- Ilana: 256, 0x100
- Paramita: Nọmba iwọn
- Command 256 returns the status and weight of the specified scale in floating-point format, without changing the display. This command also causes the format-independent commands to return a value in
- the floating-point format. Returns current weight at a floating-point format.
Tẹ Tare bi leefofo
- Àṣẹ: 268, 0x10C
- Paramita: Nọmba iwọn
- Iye: Tare àdánù
- Command 268 enters a tare for the scale selected in floating-point format. The indicator returns the tare weight as taken, or 0 for no tare.
Ka Gross iwuwo bi leefofo
- Ilana: 288, 0x120
- Paramita: Nọmba iwọn
- Pipaṣẹ 288 da iye iwuwo iwuwo pada fun iwọn ti a sọ pato ni ọna kika lilefoofo.
Ka Apapọ iwuwo bi leefofo
- Ilana: 289, 0x121
- Paramita: Nọmba iwọn
- Pipaṣẹ 289 da iye iwuwo apapọ pada fun iwọn ti a sọ ni ọna kika lilefoofo.
Ka Tare bi leefofo
- Ilana: 290, 0x122
- Paramita: Nọmba iwọn
- Pipaṣẹ 290 da iye iwuwo tare pada fun iwọn ti a sọ pato ni ọna kika lilefoofo.
Ka Ifihan lọwọlọwọ bi Lilefofo
- Ilana: 293, 0x125
- Paramita: Nọmba iwọn
- Pipaṣẹ 293 da iye iwuwo pada fun iwọnwọn pàtó kan bi o ti han lọwọlọwọ ni ọna kika lilefoofo. Eyi le pẹlu gross, net, tare, tabi awọn iye akojo, bi o ti mu ṣiṣẹ. Iwọn iwuwo ti pada ni ipo ti a lo lati ṣe afihan ẹrọ ailorukọ iwọn kan.
Ka Accumulator bi leefofo
- Ilana: 294, 0x126
- Paramita: Nọmba iwọn
- Pipaṣẹ 294 da iye ikojọpọ pada fun iwọn ti a sọ ni ọna kika lilefoofo. Ipo ipele ti wa ni ipadabọ ni aaye ipo olufihan.
- Ka Oṣuwọn Iyipada bi Lilefofo
- Ilana: 295, 0x127
- Paramita: Nọmba iwọn
- Pipaṣẹ 295 da pada oṣuwọn lọwọlọwọ ti iye iyipada fun iwọn ti a sọ pato ni ọna kika lilefoofo. Aṣẹ yii wulo fun 1280 nikan.
Ṣeto Setpoint Iye bi leefofo
- Ilana: 304, 0x130
- Parameter: Setpoint nọmba
- Iye: iye ṣeto
- Command 304 sets the setpoint value for the specified setpoint in floating-point format. This command is valid only when the setpoint is configured and requires a setpoint value. Batch status is returned in place of the indicator status.
Ṣeto Setpoint Hysteresis bi leefofo
- Ilana: 305, 0x131
- Parameter: Setpoint nọmba
- Iye: iye Hysteresis
- Pipaṣẹ 305 ṣeto iye hysteresis fun ibi isọtẹlẹ ti a sọ pato ni ọna kika oju omi lilefoofo. Aṣẹ yii wulo nikan nigbati o ba tunto ibi-ipin ti o nilo iye hysteresis kan. Ipo ipele ti wa ni ipadabọ ni aaye ipo olufihan.
Ṣeto bandiwidi Setpoint bi leefofo
- Ilana: 306, 0x132
- Parameter: Setpoint nọmba
- Iye: iye bandiwidi
- Pipaṣẹ 306 ṣeto iye bandiwidi fun aaye ibi-itọka kan ni ọna kika lilefoofo. Aṣẹ yii wulo nikan nigbati o ba tunto aaye ti o nilo iye bandiwidi kan. Ipo ipele ti wa ni ipadabọ ni aaye ipo olufihan.
Ṣeto Setpoint Preact bi leefofo
- Ilana: 307, 0x133
- Parameter: Setpoint nọmba
- Iye: Preact iye
- Command 307 sets the preact value for the specified setpoint in floating-point format.
- Aṣẹ yii wulo nikan nigbati o ba tunto aaye ti o nilo ati pe o nilo iye asọtẹlẹ kan. Ipo ipele ti wa ni ipadabọ ni aaye ipo olufihan.
Ka Setpoint Iye bi leefofo
- Ilana: 320, 0x140
- Parameter: Setpoint nọmba
- Command 320 returns the target value for the specified setpoint in floating-point format. This command is valid only when the setpoint is configured and requires a target value. Batch status is returned in place of the indicator status.
Ka Setpoint Hysteresis bi leefofo
- Ilana: 321, 0x141
- Parameter: Setpoint nọmba
- Command 321 returns the hysteresis value for the specified setpoint in floating-point format. This command is valid only when the setpoint is configured and requires a hysteresis value. Batch status is returned in place of the indicator status.
Ka bandiwidi Setpoint bi leefofo
- Ilana: 322, 0x142
- Parameter: Setpoint nọmba
- Command 322 returns the bandwidth value for the specified setpoint in floating-point format. This command is valid only when the setpoint is configured and requires a bandwidth value. Batch status is returned in place of the indicator status.
Ka Setpoint Preact bi leefofo
- Ilana: 323, 0x143
- Parameter: Setpoint nọmba
- Command 323 returns the preact value for the specified setpoint in floating-point format. This command is valid only when the setpoint is configured and requires a preact value. Batch status is returned in place of the indicator status.
© Rice Lake Weighing Systems Akoonu koko ọrọ si ayipada lai akiyesi.
- 230 W. Coleman St. • Rice Lake, WI 54868 • USA USA: 800-472-6703 • International: +1-715-234-9171
FAQs
Q: Can the Modbus TCP Interface be used with any PLC or primary controller?
A: Yes, the Modbus TCP Interface can be used with most PLCs or primary controllers that support the Modbus communication protocol.
Q: Is it necessary to use a NEMA Type 4X stainless steel enclosure for the indicator?
A: It is recommended to use a NEMA Type 4X stainless steel enclosure, especially in washdown environments, to ensure the longevity and protection of the indicator and the Modbus TCP Interface.
Awọn iwe aṣẹ / Awọn orisun
 |
RICE LAKE 1280 Indicator Programmable Weight Indicator and Controller [pdf] Fifi sori Itọsọna 156782, 1280 Indicator Programmable Weight Indicator and Controller, Indicator Programmable Weight Indicator and Controller, Programmable Weight Indicator and Controller, Weight Indicator and Controller, Indicator and Controller, Controller |