StarTech CK4-D108C Secure 8 Port KVM Switch

• CK4-D102C 2-Port SH Secure Pro DVI KVM w/audio and CAC, PP 4.0
• CK4-D202C 2-Port DH Secure Pro DVI KVM w/audio and CAC, PP 4.0
• CK4-D104C 4-Port SH Secure Pro DVI KVM w/audio and CAC, PP 4.0
• CK4-D204C 4-Port DH Secure Pro DVI KVM w/audio and CAC, PP 4.0
• CK4-D404C 4-Port QH Secure Pro DVI KVM w/audio and CAC, PP 4.0
• CK4-D108C 8-Port SH Secure Pro DVI KVM w/audio and CAC, PP 4.0
• CK4-D208C 8-Port DH Secure Pro DVI KVM w/audio and CAC, PP 4.0
• CK4-D116C 16-Port SH Secure Pro DVI KVM w/audio and CAC, PP 4.0

Ọja LILO awọn ilana

Awọn alaye imọ-ẹrọ

KINI NINU APOTI?

AABO ẸYA

ANTI-TAMPER yipada
Awoṣe kọọkan ni ipese pẹlu Anti-T inuamper switches, which sense attempts to open the device enclosure. Once the system identifies such an attempt, all the front panel LEDs will flash rapidly, the internal buzzers will beep, and the unit will become useless by shutting off connection with all attached PCs and peripherals, disabling any functionality.

TAMPEri-ẹri Igbẹhin
Awọn apade ti awọn kuro ni aabo pẹlu niampedidi eri-ẹri lati pese ẹri wiwo ti o fihan ti o ba ti ṣii ẹyọ naa.

FIMWARE ti o ni idaabobo
Adarí ẹyọkan naa ni ẹya aabo pataki ti o ṣe idiwọ atunto tabi kika famuwia naa.

Ipinya giga LORI awọn ikanni USB
Opto-isolators ni a lo ninu ẹyọ naa lati jẹ ki awọn ipa ọna data USB jẹ iyasọtọ ti itanna lati ara wọn, pese ipinya giga ati idilọwọ jijo data laarin awọn ebute oko oju omi.

Afarawe EDID ti o ni aabo
The unit prevents unwanted and insecure data from transmitting through the DDC lines by means of secure EDID learning and emulation.

IWADAN ARA
A self-test is performed each time the KVM is powered on as part of its boot-up sequence. If the KVM starts up correctly and is functional, the self-test has passed. However, if all Front Panel LEDs are on and not flashing, the power-up self-test has failed, and all functions are disabled. Check if any of the front panel port selection buttons are jammed. In this case, release the jammed button and recycle the power.

Fifi sori ẹrọ

Awọn ibeere Eto

1. StarTech.com Secure PSS is compatible with standard personal/portable computers, servers, or thin clients, running operating systems such as Windows or Linux.
2. Awọn ẹrọ agbeegbe ti o ni atilẹyin nipasẹ KVM wa ni atokọ ni tabili atẹle:

ÌFIKÚN (Tẹsiwaju)

ORI KAN:

1. Rii daju pe agbara wa ni pipa tabi ge asopọ lati ẹyọkan ati awọn kọnputa.
2. Use a DVI cable to connect the DVI output port from each computer to the corresponding DVI IN ports of the unit.
3. Lo okun USB kan (Iru-A si Iru-B) lati so ibudo USB pọ lori kọnputa kọọkan si awọn ebute USB ti ẹyọkan.
4. Ni yiyan so okun ohun afetigbọ sitẹrio kan (3.5mm si 3.5mm) lati so iṣelọpọ ohun ti awọn kọnputa pọ si AUDIO IN awọn ebute oko oju omi ti ẹyọ naa.
5. Connect a monitor to the DVI OUT console port of the unit using a DVI cable.
6. So bọtini USB ati Asin pọ si awọn ebute oko oju omi USB meji.
7. Ni yiyan so awọn agbohunsoke sitẹrio pọ si AUDIO OUT ibudo ti ẹyọkan.
8. Optionally connect CAC (COMMON ACCESS CARD, SMART CARD READER) to the CAC port inthe user console interface.
9. Ni ipari, agbara lori KVM nipa sisopọ ipese agbara 12VDC si asopo agbara, ati lẹhinna tan-an gbogbo awọn kọnputa.

Akiyesi: Kọmputa ti a ti sopọ si ibudo 1 yoo ma yan nigbagbogbo nipasẹ aiyipada lẹhin fifi agbara soke.
Akiyesi: You can connect up to 2 computers to the 2-port KVM, up to 4 computers to the 4-port KVM, up to 8 computers to the 8-port KVM, and up to 16 computers to the 16-port KVM.

Awọn ikilo PATAKI – Fun awọn idi aabo:

• Ọja yii ko ṣe atilẹyin awọn ẹrọ alailowaya. Ma ṣe gbiyanju lati lo bọtini itẹwe alailowaya tabi asin alailowaya pẹlu ọja yii.
• Ọja yii ko ṣe atilẹyin awọn bọtini itẹwe pẹlu awọn ibudo USB ti a ti ṣopọ tabi awọn ebute oko USB. Lo awọn bọtini itẹwe USB boṣewa (HID) pẹlu ẹrọ yii.
• Ọja yii ko ṣe atilẹyin igbewọle ohun gbohungbohun tabi igbewọle laini. Maṣe so awọn gbohungbohun eyikeyi tabi agbekari pẹlu awọn gbohungbohun si ẹrọ yii.
• Connection of authentication devices (CAC) with external power sources is prohibited

ÌFIKÚN (Tẹsiwaju)

ORI PUPO:

1. Rii daju pe agbara wa ni pipa tabi ge asopọ lati ẹyọkan ati awọn kọnputa.
2. Use DVI cables to connect the DVI output ports of each computer to the corresponding DVI IN ports of the unit. For example, if using CK4-D404C, the four DVI ports of one computer must all be connected to one channel.
   • The DVI IN connectors that belong to the same channel are arranged vertically.
3. Lo okun USB kan (Iru-A si Iru-B) lati so ibudo USB pọ lori kọnputa kọọkan si awọn ebute USB ti ẹyọkan.
4. Ni yiyan so okun ohun afetigbọ sitẹrio kan (3.5mm ni awọn opin mejeeji) lati so iṣelọpọ ohun ti kọnputa pọ si AUDIO IN awọn ebute oko oju omi ti ẹyọ naa.
5. So awọn diigi pọ si awọn ibudo console OUT DisplayPort ti ẹyọ naa nipa lilo awọn kebulu DisplayPort.
   • The DVI IN ports on one row will be switched to the DVI OUT of the same row.
6. So a USB keyboard ati Asin ninu awọn meji USB console ebute oko.
7. Ni yiyan so awọn agbohunsoke sitẹrio pọ si AUDIO OUT ibudo ti ẹyọkan.
8. Optionally connect the CAC (smart card reader) to the CAC port in the user console interface.
9. Agbara lori KVM nipasẹ sisopọ ipese agbara 12VDC si asopo agbara, ati lẹhinna tan-an gbogbo awọn kọnputa.
   • Akiyesi: Kọmputa ti a ti sopọ si ibudo 1 yoo ma yan nigbagbogbo nipasẹ aiyipada lẹhin fifi agbara soke.

ÌFIKÚN (Tẹsiwaju)

ÌFIKÚN (Tẹsiwaju)

EDID KỌ:
The KVM is designed to learn the connected monitor’s EDID upon power-up. In the event of connecting a new monitor to the KVM, a power recycle is required. The KVM will indicate to the user the EDID learn process by flashing the front panel’s LEDs. Port one green and push button blue LEDs will both begin to flash for about 10 seconds. When the LEDs stop flashing, the EDID learn process is done. If the KVM has more than one video board (such as dual-head and quad-head models), then the unit will continue to learn the EDIDs of the connected monitors and indicate the progress of the process by flashing the next port selection green and push button blue LED,s respectively. The monitor must be connected to the video output connector located in the console space at the back of the KVM during the EDID learn process.  If the read EDID from the connected monitor is identical to the current stored EDID in the KVM, then the EDID learn function will be skipped.

CAC (Kaadi Wiwọle WỌpọ, Oluka Kaadi SỌgbọn)
Fifi sori ẹrọ
The following steps are intended for the system administrator or IT manager only. If you have the optional CAC ports, there will be 2 ports on a 2-host ports KVM, 4 ports on a 4-host ports KVM, 8 ports on an 8-host ports KVM, and 16 ports on a 16-host ports KVM. CAC connection to the computer requires a USB cable connection separate from the keyboard and mouse. This allows the CAC to be connected independently from the keyboard and mouse. It also allows the user to select whether CAC for a certain computer is supported or not.

1. Rii daju pe agbara wa ni pipa tabi ge asopọ lati ẹyọ ati kọnputa naa.
2. Lo okun USB kan (Iru-A si Iru-B) lati so ibudo USB pọ lori kọnputa si awọn ebute oko USB CAC oniwun rẹ lori KVM. Ma ṣe so okun USB pọ ti iṣẹ CAC ko ba nilo fun kọnputa yẹn.
3. So CAC kan (oluka kaadi ọlọgbọn) si ibudo CAC ni wiwo console olumulo.
4. Agbara lori KVM nipasẹ sisopọ ipese agbara 12VDC si asopo agbara, ati lẹhinna tan-an gbogbo awọn kọnputa.
5. Lati mu CAC kuro fun eyikeyi ikanni (gbogbo awọn ebute oko oju omi CAC ti ṣiṣẹ bi aiyipada), lo awọn bọtini iwaju iwaju lati yi KVM pada si ikanni ti ipo CAC ti o fẹ yipada. Ni kete ti a ti yan ikanni naa, bọtini LED fun ikanni kan pato yẹ ki o wa ni titan (ibudo CAC ṣiṣẹ). Tẹ mọlẹ bọtini naa fun awọn aaya 3 titi ti bọtini LED yoo wa ni pipa. Ibudo CAC ti wa ni alaabo fun ikanni yii.
6. To enable CAC for any channel, use the front panel buttons to switch the KVM to the channel whose CAC  mode you wish to change. Once the channel is selected, the button LED for this specific channel should be off (CAC port disabled). Press and hold the button for 3 seconds until the button LED turns on. The CAC port is now enabled for this channel. An active session on a computer is terminated upon removal of the CAC device.

Akiyesi: Igba ṣiṣi naa yoo fopin si lẹsẹkẹsẹ lẹhin yiyọkuro ẹrọ CAC ti o forukọsilẹ

CAC ibudo iṣeto ni
Awọn igbesẹ wọnyi jẹ ipinnu fun oluṣakoso eto ati awọn oniṣẹ (olumulo).

Akiyesi: Only one computer connected to port 1 is required for this operation. CAC port Configuration is an optional feature, allowing registration of any USB peripheral to operate with the KVM. Only one peripheral can be registered, and only the registered peripheral will operate with the KVM. By default, when no peripheral is registered, the KVM will operate with any Smart Card Reader.

Ṣe atunto ibudo CAC nipasẹ awọn aṣayan Akojọ olumulo olumulo

1. Ṣii Eto Isakoso ati Aabo Iṣakoso.
2. Lilo keyboard, tẹ bọtini Alt lẹẹmeji ki o tẹ “cnfg”.
3. Ni eyi stage, Asin ti o sopọ si KVM yoo da iṣẹ ṣiṣe duro.
4. Tẹ orukọ olumulo aiyipada "olumulo" ki o tẹ Tẹ.
5. Tẹ ọrọ igbaniwọle aiyipada sii “12345” ki o tẹ Tẹ.
6. Yan aṣayan 2 lati inu akojọ aṣayan loju iboju rẹ ki o tẹ Tẹ.
7. So ẹrọ agbeegbe pọ lati forukọsilẹ si ibudo USB CAC ni ẹgbẹ console ti KVM ki o duro titi KVM yoo fi ka alaye agbeegbe tuntun naa.
8. KVM yoo ṣe atokọ alaye ti agbeegbe ti o sopọ loju iboju ati buzz ni awọn akoko 3 nigbati iforukọsilẹ ba pari

AUDITING: Idasonu Wọle Iṣẹlẹ nipasẹ Awọn aṣayan Akojọ olumulo

Awọn igbesẹ wọnyi jẹ ipinnu fun alabojuto eto.
Akiyesi: Only one computer connected to port 1 is required for this operation. The Event Log is a detailed report of critical activities stored in the KVM memory. A comprehensive feature list and guidance for Administration and Security Management Tools can be found in the Administrator’s Guide available for download from www.StarTech.com/support.

Si view tabi ju silẹ Akọsilẹ Iṣẹlẹ:

1. Ṣii Eto Isakoso ati Aabo Iṣakoso.
2. Lilo keyboard, tẹ bọtini Alt lẹẹmeji ki o tẹ “cnfg”.
3. Tẹ orukọ abojuto aiyipada "abojuto" ki o tẹ Tẹ.
4. Tẹ ọrọ igbaniwọle aiyipada sii "12345" ki o tẹ Tẹ.
5. Beere Idasonu Wọle nipa yiyan aṣayan 5 ninu akojọ aṣayan. (Afihan ninu aworan 12-1)

* Wo Isakoso ati Itọsọna Irinṣẹ Iṣakoso Aabo fun alaye alaye.

Tun: Mu pada Factory aseku

Awọn igbesẹ wọnyi jẹ ipinnu fun alabojuto eto.
Akiyesi: Kọmputa kan ṣoṣo ti o sopọ si ibudo 1 ni a nilo fun iṣẹ yii. Mu pada Factory Aiyipada yoo tun gbogbo awọn eto lori KVM si ipo atilẹba wọn.

• Iforukọsilẹ ibudo CAC yoo yọkuro.
• Awọn eto KVM yoo jẹ atunto si awọn aṣiṣe ile-iṣẹ.

Lati Mu Awọn Aiyipada Factory Mu pada nipasẹ Awọn aṣayan Akojọ olumulo:

1. Ṣii Eto Isakoso ati Aabo Iṣakoso.
2. Lilo keyboard, tẹ bọtini Alt lẹẹmeji ki o tẹ “cnfg”.
3. Tẹ orukọ abojuto aiyipada "abojuto" ki o tẹ Tẹ.
4. Tẹ ọrọ igbaniwọle aiyipada sii "12345" ki o tẹ Tẹ.
5. Select option 7 from the menu on your screen and press Enter. (Menu shown in Figure 12-1)

* Wo Isakoso ati Itọsọna Irinṣẹ Iṣakoso Aabo fun alaye alaye.

IWA LED

EDID Kọ ẹkọ – Awọn LED Panel Iwaju:
Gbogbo awọn LED ti wa ni titan fun iṣẹju 1. Lẹhinna:

• Port 1 LED yoo filasi titi ti opin ti awọn ilana.
• Awọn LED 2 Port yoo filasi titi ti opin ilana naa ti igbimọ fidio keji ba wa (KVM-ori Meji).
• Port 3 LEDs will flash until the end of the process if a third video board exists (Quad-head KVM).
• Port 4 LEDs will flash until the end of the process if a fourth video board exists (Quad-head KVM).

PATAKI!

• Ti gbogbo awọn LED Panel iwaju ba n tan imọlẹ ati buzzer ti n kigbe, KVM ti jẹ TAMPERED with, and all functions are permanently disabled.
• Jọwọ kan si StarTech.com imọ support ni  www.StarTech.com/Contact.
• If all Front Panel LEDs are on and not flashing, the POWER UP SELF TEST has failedand all functions are disabled.
• Ṣayẹwo boya eyikeyi awọn bọtini yiyan ibudo iwaju nronu ti wa ni jam. Ni idi eyi, tu bọtini jammed ati atunlo agbara naa.
• If pthe power-up self-test is still failing, please contact StarTech.com imọ support ni   www.StarTech.com/Contact.

IṢẸ ỌRỌ

Išakoso PANEL iwaju
Lati yipada si ibudo titẹ sii, tẹ bọtini titẹ sii ti o fẹ ni iwaju iwaju ti KVM. Ti o ba yan ibudo titẹ sii, LED ti ibudo yẹn yoo tan. Igba ṣiṣi ti pari lori yi pada si kọnputa ọtọtọ.

ASIRI

KO SI AGBARA

• Rii daju pe ohun ti nmu badọgba agbara ti sopọ ni aabo si asopo agbara ti ẹyọkan.
• Ṣayẹwo awọn wu voltage ti ipese agbara ati rii daju wipe awọn voltage iye jẹ ni ayika 12VDC.
• Rọpo ipese agbara.

KO FIDIO

• Ṣayẹwo boya gbogbo awọn kebulu fidio ba ti sopọ daradara.
• So kọnputa pọ taara si atẹle lati rii daju pe atẹle rẹ ati kọnputa n ṣiṣẹ daradara.
• Restart the computers.+

KEYBOARD KO SISE

• Ṣayẹwo boya keyboard ti sopọ daradara si ẹyọkan.
• Ṣayẹwo boya awọn okun USB ti o so ẹyọ pọ ati awọn kọnputa ti sopọ daradara.
• Try connecting the USB to the computer to a different port.
• Rii daju pe keyboard n ṣiṣẹ nigbati o ba sopọ taara si kọnputa naa.
• Rọpo keyboard.

Akiyesi: Awọn NUM, CAPS, ati SCROLL Lock LED awọn afihan lori bọtini itẹwe ko yẹ ki o tan ina ti o ba sopọ si KVM naa.

EKU KO SISE

• Ṣayẹwo boya Asin naa ni asopọ daradara si ẹyọkan.
• Try connecting the USB to the computer to a different port.
• Rii daju pe Asin ṣiṣẹ nigbati o ba sopọ taara si kọnputa.
• Ropo awọn Asin.

KO ODIO

• Ṣayẹwo boya gbogbo awọn kebulu ohun ti sopọ mọ daradara.
• So awọn agbohunsoke taara si kọnputa lati rii daju pe awọn agbohunsoke ati ohun kọnputa n ṣiṣẹ daradara.
• Ṣayẹwo awọn eto ohun ti kọnputa ki o rii daju pe iṣelọpọ ohun jẹ nipasẹ awọn agbohunsoke. KO si CAC (KAAadi Wiwọle ti o wọpọ, oluka Kaadi Smart)
• Ṣayẹwo boya awọn okun USB ti o so ẹyọ pọ ati awọn kọnputa ti sopọ daradara.
• Rii daju pe ibudo CAC ti ṣiṣẹ.

Alaye atilẹyin ọja
For information regarding the warranty of this product, please visit: www.StarTech.com/Warranty

AKIYESI
The information contained in this document is subject to change without notice. StarTech.com makes no warranty of any kind about this material, including but not limited to, implied warranties of merchantability and fitness for a particular purpose. StarTech.com will not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material. No part of this document may be photocopied, reproduced, or translated into another language without prior written consent from StarTech.com, Ltd.

FAQ

What Is EDID Learn And How Is It Triggered?

The EDID Learn process is triggered only during the KVM’s startup sequence. This behavior aligns with the NIAP 4.0 Protection Profile requirements, which restrict continuous EDID communication. Under this standard, the KVM may only receive EDID data from the monitor during initialization to minimize active data exchange between the monitor and the KVM, thereby enhancing isolation and overall device security. Ultimate fix: KVM reset.

Why Do Different Ports Have Different LED Colors?

The color-coded LEDs serve a security purpose by allowing users to clearly and visually confirm which computer is active before entering sensitive data. This feature reduces the risk of accidental data entry on the wrong system. (First: green, last: red, middle: orange.)

Does The KVM Work With Converters Or Adapters?

No, the use of converters or adapters is not recommended.

What Issues Does A KVM Reset Fix?

A reset can resolve video or EDID issues, CAC reader drops, or detection issues caused by a power outage.

Is The Software Utility Required?

No, but it is recommended to update the username and password during initial setup

Does The Software Utility Work On Operating Systems Other Than Windows?

Rara.

How Big Is The Log File Ifipamọ?

FIFO – 100 entries.

Can The Time Zone Be Changed?

No, the default time zone is Pacific Time (USA).

Is There A Battery Internally?

Bẹẹni.

Does the KVM Have Anti-Tamper Features?

Bẹẹni

Can The Onboard Buzzer Be Disabled?

Rara.

Do Special Keys (Media Shortcut Keys) Work?

No, using them may cause unexpected behavior.

Awọn iwe aṣẹ / Awọn orisun

StarTech CK4-D108C Secure 8 Port Kvm Switch [pdf] Ilana itọnisọna CK4-D108C Secure 8 Port Kvm Switch, CK4-D108C, Secure 8 Port Kvm Switch, Secure 8 Port Kvm Switch, Secure 8 Port, Kvm Switch

Awọn itọkasi

• Itọsọna olumulo