Ìwé Ìtọ́sọ́nà fún Àwọn Ohun Èlò Softwarẹ Sunell NVR/DVR

How to upgrade the firmware of an NVR/DVR using the Tools Software

Igbaradi:

1. Download the correct firmware for your NVR/DVR
2. Ṣe igbasilẹ sọfitiwia Irinṣẹ naa.
3. Ensure that the PC and the NVR/DVR are on the same network segment.

Awọn ilana:

1. Open the Tools software and click Awọn eto wiwa.

2. Enter the device login password in the Ọrọigbaniwọle field. Then, click OK.

3. Tẹ àwárí to discover. If the entered password is correct, the camera status will appear as `Online‘. If it says `Wọle kuna‘, you will not be able to procced with the update.

4. Tẹ awọn Imudojuiwọn button (the fourth button on the left panel).

5. Check the boxes for the devices you would like to update.

6. Tẹ Yan File to locate and select the appropriate firmware file.

7. Ṣayẹwo awọn Tunto box if required, then click Update.

8. After the firmware has been uploaded to the device, the upgrade will proceed. Do not close the tool until the update is completed.
9. Once the upgrade is successful, the Upgrade status will be ‘Igbesoke aseyori' .