Surenoo SLC2004C Series kikọ LCD Ifihan
Awọn pato
- Nọmba awoṣe: S3ALC2004C
- Olupese: Shenzhen Surenoo Technology Co., Ltd.
- Webojula: www.surenoo.com.
- Imeeli: info@surenoo.com.
BERE ALAYE
SLC2004C jara Table
SLC2004C jara Aworan
- * Nọmba awọn aworan jara wa ni ibamu pẹlu nọmba ti tabili jara ti o wa loke 1.1.
PATAKI
Ifihan Specification
| Nkan | Standard Iye | Ẹyọ |
| Ifihan kika | 20 Awọn lẹta x 4 Awọn ila | - |
| Asopọmọra ifihan | Pin Header, 18-pin | - |
| FPC Asopọmọra | N/A | - |
| Awọn iwọn otutu ti nṣiṣẹ | -20 ~ +70 | ℃ |
| Ibi ipamọ otutu | -30 ~ +80 | ℃ |
| Iyan Panel Fọwọkan | Rara | - |
| Oorun Readable | - |
Mechanical Specification
| Nkan | Standard Iye | Ẹyọ |
| Ìla Ìla | 182.0 (W) x 90.0 (H) x14.0 (T) | mm |
| Agbegbe wiwo | 147.0 (W) x 65.4 (H) | mm |
| Agbegbe ti nṣiṣe lọwọ | 137.00 (W) x 59.80 (H) | mm |
| Dot Iwon | 1.50×1.10 | mm |
| Aami ipolowo | 1.60×1.20 | mm |
Itanna Specification
| Nkan | Standard Iye | Ẹyọ |
| IC Package | COB | - |
| Adarí | HD44780 tabi KS0066 deede tabi SPLC780 | - |
| Ni wiwo | 6800 8-bit Parallel, 6800 4-bit Parallel | - |
Specification Optical
| Nkan | Standard Iye | Ẹyọ |
| Iru LCD | Tọkasi 1.1 SLC2004C Series Table | - |
| Viewing Angle Range | 6:00 | - |
| Backlight Awọ | Tọkasi 1.1 SLC2004C Series Table | - |
| LCD Ojuse | 1/16 | - |
| LCD Iwaju | 1/5 | - |
Iyaworan OUTLINE
Itanna SEC
Pin iṣeto ni Pin
| Pin No | Orukọ Pin | Awọn apejuwe |
| 1 | VSS | Ilẹ, 0V |
| 2 | VDD | Logic Power Ipese |
| 3 | V0 | Iwọn iṣẹtage fun LCD |
| 4 | RS | Iforukọsilẹ Data / Ilana Yan (H: Ifihan data, L: Ifihan agbara itọnisọna) |
| 5 | R/W | Ka / Kọ (H: Ipo kika, L: Ipo kikọ) |
| 6 | E | Mu ifihan agbara ṣiṣẹ |
| 7 | DB0 | Data Bit 0 |
| 8 | DB1 | Data Bit 1 |
| 9 | DB2 | Data Bit 2 |
| 10 | DB3 | Data Bit 3 |
| 11 | DB4 | Data Bit 4 |
| 12 | DB5 | Data Bit 5 |
| 13 | DB6 | Data Bit 6 |
| 14 | DB7 | Data Bit 7 |
| 15 | LED_A | Backlight Anode |
| 16 soke | LED_K | Backlight Cathode |
| 17 | NC | |
| 18 soke | NC |
Idi ti o pọju-wonsi
Itanna Abuda
AWỌN AWỌRỌ NIPA
Ipele Didara itewogba
Pupọ kọọkan yẹ ki o ni itẹlọrun ipele didara ti a ṣalaye bi atẹle
| PAWỌN NIPA | AQL | 2DỌdun 91B288BE285B Ipari |
| A. Major | 0.4% | Ni alebu awọn iṣẹ bi ọja kan |
| B. Kekere | 1.5% | Ni itẹlọrun gbogbo awọn iṣẹ bi ọja ṣugbọn ko ni itẹlọrun boṣewa ohun ikunra |
Itumọ ti Loti
- Pupo kan tumọ si iye ifijiṣẹ si alabara ni akoko kan.
Ipo ti Kosimetik ayewo
- Ayewo ATI igbeyewo
- Idanwo IṢẸ
- Ayẹwo Irisi
- Iṣakojọpọ PATAKI
- IPO Ayẹwo
- Fi labẹ lamp (20w¡Á2) ni ijinna 100mm lati
- Tẹ iwọn 45 titọ ni iwaju (ẹhin) lati ṣayẹwo irisi LCD.
- AQL Ayẹwo ipele
- SAMPỌ̀nà LING: MIL-STD-105D
- SAMPÈTÒ LING: NIKAN
- ALABALẸ PATAKI: 0.4% (PATAKI)
- ALAPẸ KEKERE: 1.5% (Kekere)
- IPELU GBOGBO: II/DEDEDE
Module Kosimetik àwárí mu
Àwárí Ìfọ́jú Iboju (Kì í ṣiṣẹ́)
| Rara. | Àbùkù | Idajo Apejuwe | Ìpín | |
| 1 | Awọn aaye | Ni ibamu pẹlu Iboju Kosimetik àwárí mu (Ṣiṣe) No.1. | Kekere | |
| 2 | Awọn ila | Ni ibamu pẹlu Iboju Kosimetik àwárí mu (Isẹ) No.2. | Kekere | |
| 3 | Nyoju ni Polarizer | Kekere | ||
| Iwọn: d mm | Qty itewogba ni agbegbe ti nṣiṣe lọwọ | |||
| d≦0.3 0.3
1.0 1.5<d |
Aibikita 3
1 0 |
|||
| 4 | Bibẹrẹ | Ni ibamu pẹlu awọn to muna ati awọn ila ṣiṣẹ ohun ikunra àwárí mu, Nigbati awọn
ina tan imọlẹ lori dada nronu, awọn scratches ni o wa ko lati wa ni o lapẹẹrẹ. |
Kekere | |
| 5 | Allowable iwuwo | Awọn abawọn ti o wa loke yẹ ki o ya diẹ sii ju 30mm kọọkan miiran. | Kekere | |
| 6 | Awọ | Ko lati ṣe akiyesi coloration ninu awọn viewagbegbe ti awọn paneli LCD.
Iru-itanna-pada yẹ ki o ṣe idajọ pẹlu ẹhin-itanna lori ipinlẹ nikan. |
Kekere | |
| 7 | Kokoro | Ko ṣe akiyesi. | Kekere | |
Àwárí Ìwòrí (Ìṣiṣẹ́)
- 'Ko o' = Ojiji ati iwọn ko yipada nipasẹ Vo.
- 'Ko ṣe kedere' = Awọn iboji ati iwọn ti wa ni yipada nipasẹ Vo.
Akiyesi:
- Iwọn: d=(gun gun + kukuru ipari)/2
- Opin samples fun kọọkan ohun kan ni ayo .
- Awọn abawọn idiju jẹ asọye ohun kan nipasẹ ohun kan, ṣugbọn ti nọmba awọn abawọn ba jẹ asọye ni tabili loke, nọmba lapapọ ko yẹ ki o kọja 10.
- (4) In case of ‘concentration’, even the spots or the lines of ‘disregarded’ size should not be allowed. The following three situations
- Yẹ ki o ṣe itọju bi 'ifojusi'.
- 7 tabi ju awọn abawọn lọ ni Circle ti ￠5mm.
- 10 tabi ju awọn abawọn ninu Circle ti ￠10mm
- 20 tabi ju awọn abawọn ninu Circle ti ￠20mm
- Yẹ ki o ṣe itọju bi 'ifojusi'.
Awọn iṣọra FUN LILO
Mimu Awọn iṣọra
- Ẹrọ yii ni ifaragba si ibajẹ Electro-Static Discharge (ESD). Ṣe akiyesi awọn iṣọra Anti-Static.
- SUR àpapọ nronu jẹ ti gilasi. Ma ṣe tẹriba si mọnamọna ẹrọ nipa sisọ silẹ tabi ipa. Ti o ba jẹ
- SUR àpapọ nronu ti bajẹ ati awọn nkan ti o gara omi n jo jade, rii daju pe ko gba eyikeyi ni ẹnu rẹ. Ti nkan na ba kan si awọ tabi aṣọ rẹ, wẹ kuro ni lilo ọṣẹ ati omi.
- Ma ṣe lo agbara ti o pọju si oju iboju SUR tabi awọn agbegbe ti o wa nitosi nitori eyi le fa ki ohun orin awọ yatọ.
- Polarizer ti o bo oju iboju SUR ti module LCD jẹ rirọ ati ni irọrun họ. Mu yi polarizer fara.
- Ti oju iboju SUR ba di aimọ, simi si oju ki o rọra nu rẹ pẹlu asọ gbigbẹ rirọ. Ti o ba jẹ ibajẹ pupọ, asọ tutu pẹlu ọkan ninu isopropyl atẹle tabi oti.
- Awọn ohun elo miiran ju awọn ti a mẹnuba loke le ba polarizer jẹ. Paapaa, maṣe lo Omi naa.
- Ṣe itọju adaṣe lati dinku ibajẹ ti elekiturodu. Ibajẹ ti awọn amọna ti wa ni iyara nipasẹ awọn isun omi omi, ifunmọ ọrinrin tabi ṣiṣan lọwọlọwọ ni agbegbe ọriniinitutu giga.
- Install the SUR LCD Module by using the mounting holes. When mounting the LCD module, make sure it is free of twisting, warping and distortion. In particular, do not forcibly pull or bend the cable or the backlight cable.
- Maṣe gbiyanju lati ṣajọpọ tabi ṣe ilana module SUR LCD.
- NC ebute yẹ ki o wa ni sisi. Maṣe so ohunkohun.
- Ti agbara iyika kannaa ba wa ni pipa, ma ṣe lo awọn ifihan agbara titẹ sii.
- Lati yago fun iparun awọn eroja nipasẹ ina aimi, ṣọra lati ṣetọju agbegbe iṣẹ to dara julọ.
- Rii daju lati sọ ara rẹ silẹ nigbati o ba n mu awọn modulu SUR LCD.
- Awọn irinṣẹ ti a beere fun iṣakojọpọ, gẹgẹbi awọn irin tita, gbọdọ wa ni ilẹ daradara.
- Lati dinku iye ina ina aimi ti ipilẹṣẹ, maṣe ṣe apejọ ati iṣẹ miiran labẹ awọn ipo gbigbẹ.
- Awọn LCD module ti wa ni ti a bo pẹlu kan fiimu lati dabobo awọn dada àpapọ. Ṣe itọju adaṣe nigbati o ba yọ fiimu aabo yii kuro niwọn igba ti ina aimi le ṣe ipilẹṣẹ.
Awọn iṣọra Ipese Agbara
- Ṣe idanimọ ati, ni gbogbo igba, ṣe akiyesi awọn iwọntunwọnsi ti o ga julọ fun ọgbọn ati awọn awakọ LC. Ṣe akiyesi pe iyatọ diẹ wa laarin awọn awoṣe.
- Dena ohun elo ti yiyipada polarity si VDD ati VSS, sibẹsibẹ ni soki.
- Lo orisun agbara mimọ ti o ni ọfẹ lati awọn alakọja. Awọn ipo agbara-agbara n jo lẹẹkọọkan ati pe o le kọja awọn iwọn-wọnsi ti o pọju ti awọn modulu SUR.
- Agbara VDD ti module yẹ ki o tun pese agbara si gbogbo awọn ẹrọ ti o le wọle si ifihan. Maa ṣe gba awọn data akero wakọ nigbati awọn kannaa ipese si module wa ni pipa.
Awọn iṣọra iṣẹ
- MAA ṢE pulọọgi tabi yọọ module SUR nigbati eto naa ba ni agbara.
- Din okun USB gun laarin SUR module ati ogun MPU.
- Fun awọn awoṣe pẹlu awọn ina ẹhin, ma ṣe mu ina ẹhin duro nipa didaduro laini HV. Unloaded inverters gbe awọn voltage extremes ti o le aaki laarin a USB tabi ni awọn ifihan.
- Operate SUR module within the limits of the module’s temperature specifications.
Awọn iṣọra ẹrọ / Ayika
- Tita ti ko tọ jẹ idi pataki ti iṣoro module. Lilo regede flux ko ṣe iṣeduro
- Bas ti won le seep labẹ awọn electrometric asopọ ati ki o fa ikuna àpapọ.
- Oke SUR module ki o jẹ ofe lati iyipo ati aapọn ẹrọ.
- Awọn dada ti LCD nronu ko yẹ ki o wa ni ọwọ tabi họ. Iboju iwaju oju jẹ ẹya irọrun họ, ṣiṣu polarizer. Yago fun olubasọrọ ati ki o nu nikan nigbati pataki pẹlu asọ, absorbent owu damppẹlu epo benzene.
- Nigbagbogbo lo ilana egboogi-aimi lakoko mimu module SUR mu.
- Dena ọrinrin kikọ sori module ki o ṣe akiyesi awọn idiwọ ayika fun temometa ipamọ
- Ma še fipamọ ni orun taara
- Ti jijo ohun elo kirisita olomi yẹ ki o waye, yago fun olubasọrọ pẹlu ohun elo yii, pataki jijẹ.
- Ti ara tabi aṣọ ba ti doti nipasẹ ohun elo kirisita omi, wẹ daradara pẹlu omi ati ọṣẹ.
Awọn iṣọra ipamọ
- Nigbati o ba tọju awọn modulu LCD, yago fun ifihan si orun taara tabi si ina ti fluorescent lamps.
- Tọju awọn modulu SUR sinu awọn apo (yago fun iwọn otutu giga / ọriniinitutu giga ati awọn iwọn otutu kekere ni isalẹ 0C
- Nigbakugba ti o ṣee ṣe, awọn modulu SUR LCD yẹ ki o wa ni ipamọ ni awọn ipo kanna ti wọn ti firanṣẹ lati ile-iṣẹ wa.
Awọn miiran
- Awọn kirisita olomi ṣinṣin labẹ iwọn otutu kekere (labẹ iwọn otutu ipamọ), ti o yori si iṣalaye aibuku tabi iran awọn nyoju afẹfẹ (dudu tabi funfun). Awọn nyoju afẹfẹ le tun ṣe ipilẹṣẹ ti module ba wa labẹ iwọn otutu kekere.
- If SUR LCD modules have been operating for a long time, showing the same display patterns, the display patterns may remain on the screen as ghost images and a slight contrast irregularity may also appear. A normal operating status can be regained by suspending use for some time. It should be noted that this phenomenon does not adversely affect performance reliability.
- Lati dinku ibajẹ iṣẹ ti awọn modulu LCD ti o waye lati iparun ti o ṣẹlẹ nipasẹ ina aimi, ati bẹbẹ lọ, itọju adaṣe lati yago fun didimu awọn apakan atẹle nigba mimu awọn modulu.
- Agbegbe ti a fi han ti igbimọ Circuit ti a tẹjade.
- Ebute elekiturodu ruju.
LÍLO LCD modulu
Liquid Crystal Ifihan Modules
- SUR LCD ni gilasi ati polarizer kan. San ifojusi si awọn nkan wọnyi nigba mimu.
- Jọwọ tọju iwọn otutu laarin iwọn ti a sọ fun lilo ati ibi ipamọ. Ibajẹ polarization, iran ti nkuta tabi peeli-pipa polarizer le waye pẹlu iwọn otutu giga ati ọriniinitutu giga.
- Ma ṣe fi ọwọ kan, titari tabi biba awọn polarizer ti o han pẹlu ohunkohun ti o le ju asiwaju ikọwe HB (gilasi, tweezers, ati bẹbẹ lọ).
- N-hexane ni a ṣe iṣeduro fun sisọ awọn adhesives ti a lo lati so awọn polarizers iwaju / ẹhin ati awọn olutọpa ti a ṣe ti awọn ohun elo ti ara, eyi ti yoo bajẹ nipasẹ awọn kemikali gẹgẹbi acetone, toluene, ethanol ati isopropyl oti.
- When SUR display surface becomes dusty, wipe gently with absorbent cotton or other soft material like chamois soaked in petroleum benzine. Do not scrub hard to avoid damaging the display surface.
- Pa itọ kuro tabi omi ṣubu lẹsẹkẹsẹ; olubasọrọ pẹlu omi fun igba pipẹ le fa ibajẹ tabi idinku awọ.
- Yago fun olubasọrọ epo ati awọn ọra.
- Condensation lori dada ati olubasọrọ pẹlu awọn ebute nitori otutu yoo ba, abawọn tabi idọti awọn polarizers.
- After products are tested at low temperature they must be warmed up in a container before coming is contact with room temperature air.
- Maṣe fi tabi so ohunkohun pọ si agbegbe ifihan SUR lati yago fun fifi awọn aami silẹ.
- Maṣe fi ọwọ kan ifihan pẹlu ọwọ igboro. Eyi yoo ṣe abawọn agbegbe ifihan ati idinku idabobo laarin awọn ebute (diẹ ninu awọn ohun ikunra ti pinnu si awọn polarizers).
- Bi gilasi jẹ ẹlẹgẹ. O duro lati di tabi chipped nigba mimu, paapa lori awọn egbegbe. Jọwọ yago fun sisọ silẹ tabi idẹruba.
Fifi LCD modulu
- Bo oju pẹlu awo aabo sihin lati daabobo polarizer ati sẹẹli LC.
- Nigbati o ba n pejọ LCM sinu ohun elo miiran, aaye si bit laarin LCM ati awo ibamu yẹ ki o ni giga to lati yago fun aapọn si dada module, tọka si awọn pato ẹni kọọkan fun awọn wiwọn. Ifarada wiwọn yẹ ki o jẹ ± 0.1mm.
Awọn iṣọra fun Mimu Awọn modulu LCD
- Niwọn igba ti SUR LCM ti pejọ ati ṣatunṣe pẹlu iwọn giga ti konge, yago fun lilo awọn ipaya pupọ si module tabi ṣiṣe eyikeyi awọn iyipada tabi awọn iyipada si.
- Maṣe paarọ, yipada tabi yi apẹrẹ taabu pada lori fireemu irin.
- Maṣe ṣe awọn iho afikun lori igbimọ Circuit ti a tẹjade, yipada apẹrẹ rẹ tabi yi awọn ipo ti awọn paati lati so pọ.
- Maṣe ba tabi ṣe atunṣe kikọ ilana lori igbimọ Circuit ti a tẹjade.
- Egba ma ṣe yipada adikala abila roba (roba conductive) tabi asopo asiwaju ooru.
- Ayafi fun tita ni wiwo, maṣe ṣe awọn iyipada tabi awọn iyipada pẹlu irin tita.
- Maṣe ju silẹ, tẹ tabi yipo SUR LCM.
Electro-Ami Danu Iṣakoso
- Niwọn igba ti module yii nlo CMOS LSI, akiyesi iṣọra kanna ni o yẹ ki o san si isọdanu elekitirotiki bi fun CMOS IC lasan.
- Rii daju pe o wa ni ilẹ nigbati o ba nfi LCM lọwọ.
- Ṣaaju ki o to yọ LCM kuro ninu apoti iṣakojọpọ rẹ tabi ṣafikun rẹ sinu ṣeto, rii daju pe module ati ara rẹ ni agbara ina kanna.
- Nigbati o ba n ta ebute LCM, rii daju pe orisun agbara AC fun irin tita ko jo.
- Nigbati o ba nlo screwdriver ina lati so LCM pọ, screwdriver yẹ ki o jẹ ti agbara ilẹ lati dinku bi o ti ṣee ṣe eyikeyi gbigbe ti awọn igbi itanna eleto ti a ṣe nipasẹ awọn ina ti nbọ lati oluyipada ti moto naa.
- Bi o ti ṣee ṣe, ṣe agbara ina mọnamọna ti awọn aṣọ iṣẹ rẹ ati ti ibujoko iṣẹ ni agbara ilẹ.
- Lati dinku iran ti ina aimi, ṣọra pe afẹfẹ ninu iṣẹ ko gbẹ ju. Ọriniinitutu ojulumo ti 50% -60% ni a ṣe iṣeduro.
Precautions for Soldering to LCM
- Observe the following when soldering lead wire, connector cable and etc. to the SUR LCM.
- Soldering irin otutu: 280 ℃ ± 10 ℃
- Akoko tita: 3-4 iṣẹju-aaya.
- Solder: eutectic solder.
- f soldering flux is used, be sure to remove any remaining flux after finishing to soldering operation. (This does not apply in the case of a non-halogen type of flux.) It is recommended that you protect the LCD surface with a cover during soldering to prevent any damage due to flux spatters.
- Nigbati o ba n ta paneli elekitiroluminescent ati igbimọ PC, nronu ati igbimọ ko yẹ ki o yapa diẹ sii ju igba mẹta lọ. Nọmba ti o pọju yii jẹ ipinnu nipasẹ iwọn otutu ati awọn ipo akoko ti a mẹnuba loke, botilẹjẹpe iyatọ le wa ti o da lori iwọn otutu ti irin tita.
- Nigbati o ba yọ nronu electroluminescent kuro lati inu igbimọ PC, rii daju pe ataja ti yo patapata, paadi ti o ta lori igbimọ PC le bajẹ.
Awọn iṣọra fun isẹ
- Awọn viewing igun yatọ pẹlu awọn iyipada ti omi gara awakọ voltage (V0). Ṣatunṣe VO lati ṣafihan iyatọ ti o dara julọ.
- Wiwakọ SUR LCD ni voltage loke awọn iye shortens awọn oniwe-aye.
- Akoko idahun ti wa ni idaduro pupọ ni awọn iwọn otutu ni isalẹ iwọn otutu ti nṣiṣẹ. Sibẹsibẹ, eyi ko tumọ si LCD yoo jade ni aṣẹ. Yoo gba pada nigbati o ba pada si iwọn otutu ti a ti sọ tẹlẹ.
- Ti agbegbe ifihan SUR ba ti ta lile lakoko iṣẹ, ifihan yoo di ohun ajeji. Sibẹsibẹ, yoo pada si deede ti o ba wa ni pipa ati lẹhinna pada si.
- Condensation lori awọn ebute le fa idasi elekitirokemika, idalọwọduro iyika ebute naa. Nitorinaa, o gbọdọ lo labẹ ipo ibatan ti 40 ℃, 50% RH.
- Nigbati o ba n tan-an agbara, tẹ ifihan agbara kọọkan sii lẹhin ti o dara / odi voltage di idurosinsin.
Atilẹyin ọja to lopin
- Unless agreed between SUR customer and SUR, SUR will replace or repair any of its LCD modules that are found to be functionally defective when inspected in accordance with SUR LCD acceptance standards (copies available upon request) for a period of one year from the date of shipment. Cosmetic/visual defects must be returned to SUR within 90 days of shipment. Confirmation of such a date shall be based on freight documents.
- Layabiliti atilẹyin ọja ti SUR ni opin si atunṣe ati/tabi rirọpo lori awọn ofin ti a ṣeto si oke. SUR kii yoo ṣe iduro fun eyikeyi awọn iṣẹlẹ atẹle tabi ti o tẹle.
Pada Afihan
Ko si atilẹyin ọja ti o le gba ti awọn iṣọra ti a sọ loke ti jẹ aibikita. Awọn aṣoju exampdiẹ ninu awọn irufin ni:
- Baje LCD gilasi.
- PCB eyelet bajẹ tabi títúnṣe.
- PCB conductors ti bajẹ.
- Circuit títúnṣe ni eyikeyi ọna, pẹlu awọn afikun ti irinše.
- PCB tampered pẹlu nipa lilọ, engraving, tabi kikun varnish.
- Titaja si tabi ṣe atunṣe bezel ni eyikeyi ọna.
- Module repairs will be invoiced to the customer upon mutual agreement.
- Modules must be returned with a sufficient description of the failures or defects. Any connectors or cables installed by the customer must be removed completely without damaging the PCB eyelets, conductors and terminals.
IBI IWIFUNNI
- Iyẹn ni ipari iwe data naa www.surenoo.com.
- Shenzhen Surenoo Technology Co., Ltd.
- www.surenoo.com
- Imeeli: info@surenoo.com
- Skype: Surenoo365
FAQs
Q: How can I purchase additional samples of the SLC2004C Series?
A: Please click on the provided image link in the user manual to buy sample units directly from our webojula.
Q: Where can I find more technical details about the controller?
A: You can refer to the reference controller datasheet available on our webaaye tabi kan si ẹgbẹ atilẹyin wa fun iranlọwọ.
Awọn iwe aṣẹ / Awọn orisun
 |
Surenoo SLC2004C Series kikọ LCD Ifihan [pdf] Afowoyi olumulo SLC2004C Series Character LCD Display, SLC2004C Series, Character LCD Display, LCD Display, Display |