TECTINTER Q103 Bluetooth Controller User Manual

TECTINTER Q103 Bluetooth Controller

Awọn pato

• Awoṣe: Q103
• Ibamu: Android 9.0+, iOS 13.0+, Windows 10+, Switch, PS3
• Asopọmọra: Bluetooth, 2.4G Wireless, USB (Type-C)
• Ṣiṣẹ Voltage: DC 3.7V
• Ṣiṣẹ lọwọlọwọ: <30mA
• Ilọ oorun: <5uA
• Ngba agbara Voltage/Lọwọlọwọ: DC 5V / 500mA

Laasigbotitusita

• Alakoso ko sopọ:
  • Rii daju pe oludari ti gba agbara ni kikun.
  • Make sure the correct mode (X, V, S) is selected for your device.
  • Try re-pairing the controller by pressing the PAIR button and searching again on your device.
  • Rii daju pe Bluetooth ti ṣiṣẹ lori ẹrọ rẹ.
  • For 2.4G mode, ensure the USB dongle is properly inserted.
• Awọn bọtini ko dahun:
  • Check if the controller is connected. The LED indicator should be solid.
  • Try resetting the controller (R3 + L3).
  • Test the controller in a different game or application.
• Aisun igbewọle:
  • Ensure you are within a reasonable range of your device (for Bluetooth/2.4G).
  • Din kikọlu kuro lati awọn ẹrọ alailowaya miiran.
  • Try connecting via USB cable if available.
• Alakoso ko gba agbara:
  • Ensure the Type-C cable is securely connected to both the controller and a power source.
  • Gbiyanju okun Iru-C ti o yatọ tabi ohun ti nmu badọgba agbara.
  • The LED indicator should show the charging status.

Q103 aworan atọka

1. D-paadi Bọtini
2. Bọtini X/Y/A/B
3. HOME Reconnect/Power Button
4. Bọtini PAIRI
5. Bọtini Yan
6. Bọtini TURBO
7. Osi Joystick/L3 Bọtini
8. Ọtun Joystick/R3 Bọtini
9. Bọtini DARA
10. Bọtini Bẹrẹ
11. L Bọtini
12. B2 Bọtini
13. Iru-C Gbigba agbara Port
14. R2 Bọtini
15. Bọtini R
16. Iho atunto
17. LED
18. Ipo Yipada

Android / iOS / Windows/QUBE
Android 9.0 / iOS 13.0 / Win 10 ati loke

Bluetooth asopọ

1. Yipada sipo: Yipada si X lati tẹ ipo X-INPUT sii.
2. Lilo akọkọ (Agbara-lori sisopọ):
   • Press the Pair button to start the pairing, and the LED will blink.
   • Turn on your device’s Bluetooth search and connect the Bluetooth device “Xbox Wireless Controller”.
   • LED jẹ pupa nigbagbogbo nigbati isọdọtun jẹ aṣeyọri.
3. Lo lẹẹkansi (Atunṣe):
   1. Press the HOME button to power on, and the LED will blink slowly.
   2. LED jẹ pupa nigbagbogbo nigbati isọdọtun jẹ aṣeyọri.
4. Press the PAIR button to power off the device.

Ipo Yipada

Bluetooth asopọ

1. Yipada pada: Yipada si S lati tẹ ipo Yipada sii.
2. Lilo akọkọ (Agbara-lori sisopọ):
   a) Press the Pair button to start pairing, and the LED will blink.
   b) On the Switch console, select Controller
   → Change Grip/order to enter the Switch console pairing interface for pairing.
   LED jẹ alawọ ewe nigbagbogbo nigbati isọdọtun jẹ aṣeyọri.
3. Lo lẹẹkansi (Atunṣe):
   a) Press the HOME button to power on, and the LED will blink slowly.
   b) The LED is always green when reconnection is successful.
4. Press the PAIR button to power off the device.

ShootingPlus fun Android

Android 9.0 ati loke

1. Flip the switch: Switch to V to enter the ShootingPlus mode. ( ShootingPlus App can be downloaded and installed in various mobile app markets.)
2. Lilo akọkọ (Agbara-lori sisopọ):
   a) Press the Pair button to start pairing, and the LED will blink.
   b) Turn on your device’s Bluetooth search and connect the Bluetooth device
   “Q103_ V3”
   a) Connection is successful.
3.  Lo lẹẹkansi (Atunṣe):
   a) Press the HOME button to power on, and the LED will blink slowly.
   b) The LED is always cyan when reconnection is successful.
4. Tẹ bọtini Pair lati fi agbara pa ẹrọ naa.

2.4G receiver mode

• 2.4G wireless connection operation method for PC devices / smart TVs / TV boxes / PS3 hosts/QUBE:
  1. Insert the 2.4G wireless receiver into a PC device/smart TV,/The USB interface of the TV box.
  2. Wave switch: Set to G mode for 2.4G mode.
  3. First use (power on pairing):
     a) Press the PAIR pairing button to start pairing. The LED blue light flashes rapidly,
     The connection is successful, and the LED blue light is constantly on
  4. The LED is always cyan when reconnected-
  5. First use (power on pairing):
     Press the HOME button to power on and reconnect; the LED flashes slowly.
     Successful reconnection, LED blue light stays on
  6. Press the PAIR pairing button to turn off the device
  7. You can start operating the games downloaded and installed on PC devices/smart TV/TV box/PS3 consoles/QUBE.

Famuwia igbesoke

1. Darapọ mọ V file to the Android phone ShootingPlus app for software upgrade.
2. Support USB wired upgrade

Awọn eto ayo

• Rocker odiwọn
• Shake the joystick several times in the off state and then turn on the machine. Please do not touch the joystick when turning on the machine. The joystick will be automatically calibrated.
• Joysticks draw a square or a circle
•  + (default is circle).
• Note: The R3 Button is pressed with the Right Joystick.

Itanna paramita

• Ṣiṣẹ voltage: DC3.7V
• Ṣiṣẹ lọwọlọwọ: <30mA
• Lọwọlọwọ orun: <5uA
• Specification: DC5V/500mA
• Bluetooth transmission distance: <= 8M Battery capacity: 400mAh
• Akoko imurasilẹ: 30 ọjọ (gba agbara ni kikun)

Charging / sleep/wake-up

1. When charging, the LED will blink slowly; When the battery is full, the LED will stay bright.
2. Iṣẹ orun / ji dide:
   In pairing state, the controller will sleep if it’s not paired successfully within 1 minute.
   Connect back state: The controller will sleep if it is not connected back within 1 minute.
   Bluetooth is connected: The controller will sleep if it is not used within 5 minutes.
   Press the Pair button to turn off the device. Short press the HOME button to directly reconnect.
3. If pairing is not successful within 1 minute, it will enter sleep mode.

FCC Ikilọ

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, a nd can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cauharmful interferencec e to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient tabi tun eriali gbigba pada.
• Mu iyatọ pọ si laarin ẹrọ ati olugba.
• So ohun elo pọ si ọna iṣan lori Circuit ti o yatọ si eyiti olugba ti sopọ.
• Kan si alagbawo oniṣowo tabi redio ti o ni iriri / onimọ-ẹrọ TV fun iranlọwọ.

Iṣọra: Eyikeyi iyipada tabi awọn atunṣe si ẹrọ yii ti olupese ko fọwọsi ni gbangba le sọ aṣẹ rẹ di ofo lati ṣiṣẹ ẹrọ yii.
Ẹrọ yii ni ibamu pẹlu apakan 15 ti Awọn ofin FCC. Iṣiṣẹ jẹ koko-ọrọ si awọn ipo meji wọnyi:

1. Ẹrọ yii le ma fa kikọlu ipalara, ati
2. Ẹrọ yii gbọdọ gba kikọlu eyikeyi ti o gba, pẹlu kikọlu ti o le fa isẹ ti ko fẹ.

Ohun elo yii ni ibamu pẹlu awọn opin ifihan itankalẹ FCC ti a ṣeto fun agbegbe ti a ko ṣakoso. Ohun elo yii yẹ ki o fi sori ẹrọ ati ṣiṣẹ pẹlu aaye to kere ju ti 0cm laarin imooru ati ara rẹ.