TigerStop Mk1 Printer User Manual

Itẹwe

Itọsọna olumulo

AABO KỌKỌ!

PATAKI ALAYE AABO. KA GBOGBO IKILO KI o to ṣiṣẹ ọja YI.

IKILO GBOGBO

---

IKILO: Fifi sori ọja TigerStop® rẹ gbọdọ jẹ nipasẹ eniyan ti o ni ikẹkọ ni apẹrẹ ailewu ati fifi sori ẹrọ awọn ọja adaṣe, ati ni iṣẹ ailewu ti ohun elo agbara. Rii daju pe iru fifi sori ẹrọ ni ibamu pẹlu gbogbo awọn ibeere aabo ti ofin ati awọn itọnisọna, ati pe aabo to dara ati awọn ẹrọ aabo ni a pese ni gbogbo awọn ẹgbẹ ti ohun elo lati yago fun iraye si airotẹlẹ lakoko iṣẹ. Kan si pẹlu tẹle awọn iṣeduro ti ẹlẹrọ aabo ti o peye.

IKILO: Awọn ọja TigerStop® jẹ awọn paati ti a pinnu fun lilo ni apapo pẹlu ẹrọ ti o lewu. Lilo TigerStop® Awọn ọja ko jẹ ki ẹrọ miiran jẹ ailewu. Awọn ọja TigerStop® ko ni ipinnu lati paarọ, ni eyikeyi ọna, fun awọn iṣẹ ṣiṣe ailewu ni gbogbogbo, tabi fun awọn ẹya ailewu ti o wa ninu awọn ẹrọ miiran ti a ṣe lati jẹ ki awọn ẹrọ wọnyẹn ni ailewu bi o ti ṣee. TIGERSTOP®, ti o ba lo tabi fi sori ẹrọ ni aibojumu, o le fa ipalara tabi iku ati pe o yẹ ki o ṣiṣẹ nikan nipasẹ awọn eniyan ti o kọ ẹkọ ni awọn ilana ṣiṣe alailewu wọn. Awọn apejuwe ti TigerStop® Awọn ọja ti o wa ni lilo ko ṣe afihan, ati pe ko ṣe ipinnu lati fihan, gbogbo awọn ẹya ailewu ati awọn iṣe pataki fun iṣẹ ailewu wọn.

Awọn ikilo fifi sori ẹrọ

---

IKILO: Awọn ọja TigerStop® gbọdọ wa ni fi sori ẹrọ ni ibamu pẹlu gbogbo awọn ilana agbegbe, ipinlẹ ati ti Federal. Oṣiṣẹ nikan ti o ni ikẹkọ daradara ni apẹrẹ ailewu ati fifi sori ẹrọ ẹrọ adaṣe ati ohun elo agbara ti o jọmọ yẹ ki o fi TigerStop® Awọn ọja sori ẹrọ miiran, lati rii daju aabo ati ibudo iṣẹ to dara. Awọn ọja TigerStop® ko yẹ ki o ṣiṣẹ laisi ikẹkọ to dara, mejeeji ni iṣẹ TigerStop® Awọn ọja, ati ni iṣẹ ti awọn ohun elo ti o jọmọ.

Išọra PATAKI:
The motor box (compartment) contains high voltage pẹlu oyi FATAL ampigba. Ma ṣe gbiyanju awọn iṣe laigba aṣẹ ninu apoti mọto.

Asopọmọra

---

IKILO: Lilo interconnect TigerStop® ko ṣe iranlọwọ fun ọ ni ojuse lati rii daju pe ri rẹ tabi ohun elo miiran ni gbogbo ohun elo aabo to wulo ni aye. Gbogbo awọn fifi sori ẹrọ gbọdọ pade gbogbo awọn ibeere aabo ati awọn itọnisọna ti a beere ni ofin. Fifi sori ẹrọ ati ikẹkọ yẹ ki o ṣee ṣe ni atẹle awọn iṣeduro ti ẹlẹrọ aabo ti o peye.

IṢẸ

---

IJAMBA: Ẹrọ yii le bẹrẹ, gbe ati da duro laifọwọyi. Jeki ọwọ ati aṣọ alaimuṣinṣin kuro ninu awọn ẹya gbigbe lakoko ti o nṣiṣẹ. Awọn ẹya gbigbe le fọ ati ge. Nigbati a ba lo pẹlu ri tabi ohun elo gige miiran, ipalara ti ara ati iku le ja si ti o ba ṣiṣẹ laisi awọn olusona aabo lori gbogbo awọn ero. Maṣe ṣiṣẹ pẹlu awọn ẹṣọ kuro. Awọn oniṣẹ gbọdọ wọ oju ati aabo eti to peye.

Ikilọ! This machine can start, move and stop automatically. Keep hands and loose clothing clear of moving parts while operating. Moving parts can crush and cut.

Jeki agbegbe iṣẹ ni mimọ ati imole daradara lati yago fun ipalara lairotẹlẹ.

Do not use TigerStop® machines in a dangerous environment. Always install TigerStop® machines indoors and according to the installation instructions.

Do not use TigerStop® machines in damp or wet locations or in rain. These conditions may result in shock or electrocution.

Maṣe ṣiṣẹ nitosi awọn olomi ina tabi ni gaseous tabi awọn bugbamu bugbamu!

Wear proper apparel: no loose clothes, long hair, or jewelry which could get pulled into moving machinery or materials.
Wear proper personal protective equipment: non-slip footwear, safety glasses, ear protection, gloves, and a dust mask.

Do not use extension cords with TigerStop® machines.

Do not open motor compartment or controller. High voltage pẹlu oyi FATAL amperage present! Disconnect power before servicing. No user-serviceable parts inside.

MAA ṢE ṣiṣẹ eyi tabi ẹrọ eyikeyi labẹ ipa ti oogun tabi oti!
Only fully-qualified personnel should operate this machine.
Read the entire manual before operation of this machine.

Pe wa

---

Awọn ọfiisi

TigerStop Global Olú
12909 NE 95th Street
Vancouver, WA 98682-2426

TigerStop Europe
Bedrijvenstraat 17 NL-7641 AM
Wierden, Netherlands

Pe Wa

TigerStop Onibara Service
Foonu: +1 (360) 448 6102

TigerStop Tita
Foonu: +1 (360) 254 0661 ext 2

TigerStop Olú
Foonu: +1 (360) 254 0661
Faksi: +1 (360) 260 0755

TigerStop Europe
Foonu: +31 546 575 171

TigerStop Europe | Titaja
Foonu: +31 546 575 171 (aṣayan 2)

TigerStop Europe | Iṣẹ
Foonu: +31 546 575 171 (aṣayan 1)

TigerStop Mexico
Foonu: +1 (360) 254 0661

Imeeli Wa

TigerStop Onibara Service
Imeeli: service@tigerstop.com

TigerStop Tita
Imeeli: sales@tigerstop.com

TigerStop Olú
Imeeli: careers@tigerstop.com

TigerStop Europe | Titaja
Imeeli: saleseurope@tigerstop.com

TigerStop Europe | Iṣẹ
Imeeli: serviceeurope@tigerstop.com

Tẹle wa
  

Awọn ẹya ara Oja

---

APA	Apejuwe (NUMBER)	OPO
	Printer Package (LP0001)	1
	Label Peeler (LP0005)	1
	2″ Label Roll (LP0115)	1
	4″ Label Roll (LP0120)	1
	Printer Stand Cover (M0025)	1
	Printer Stand Base (M0024)	1
	Tube Square (M1808)	1
	Yika Tube (M1807)	1
	Itẹwe imurasilẹ Mimọ Idaji-akọmọ (M10070)	2
	M6x14mm Socket-Head dabaru (F7216)	1
	M8x50mm Hex-Head dabaru (F9827)	1
	M8x45mm Hex-Head dabaru (F9826)	2
	Alafo (F6702)	1
	M8x35mm T-Bolt (F0184)	2
	M8 Epo Flange (F0419)	5
	Hook Tape (J9000)	4 ″
	Loop Tape (J9002)	4 ″

Fifi sori ẹrọ

---

Label Peeler Installation

1. If connected, disconnect the Printer’s power input plug.

2. Remove the two screws from the bottom of the Printer.

3. Slide the bezel off the front of the Printer.

4. Slide the Label Peeler up into where the bezel was.

5. Fasten the Label Peeler to the Printer with two screws.

Printer Stand Assembly

The printer stand mounts the printer to any support structure.

The printer stand pivots between 0-90° with the base hardware.

1. Place the Printer Stand Base Brackets against the Round Tube and insert two M8x45mm Hex-Head Screws through all three parts.

2. Fasten the Base Brackets to the round tube with M8 Flange Nuts.

3. Insert one M8x35mm T-bolt through each vertical slot in the Printer Stand Base Brackets. Fasten with M8 Flange Nuts.

4. Insert the Round Tube into the Square tube and fasten with an M6x14mm Socket-Head Screw.

5. Place the Spacer between the Square Tube’s holes.

6. Connect the Spacer, Printer Stand Base, and Tube with an M8x50mm Hex-Head Screw.

7. Fasten with an M8 Flange Nut.

8. Stick Hook and Loop Tape to the bottom of the Printer and the top of the Printer Stand Base.

9. Place the Printer onto the Printer Stand Base, facing forwards.

10. Attach the Printer Stand Cover to the Printer Stand Base using the tabs on the Cover.

Muu ṣiṣẹ

---

Printer won’t function until it is enabled.

Enable Code: ___________________________

1. At the Ready Screen, press the [Show] bọtini rirọ.

2. Tẹ awọn [Akojọ aṣyn] bọtini rirọ.

3. Enter the TigerStop®’s password and press

• Nipa aiyipada, ọrọ igbaniwọle TigerStop® jẹ nọmba ni tẹlentẹle.

4. Tẹ

5. Tẹ awọn [SysInfo] bọtini rirọ.

6. Tẹ

7. Tẹ , , ati igba yen ni ọkọọkan.

8. Tẹ to erase the current enable code.

9. Tẹ to return to the Ready Screen.

10. Power down the TigerStop® and wait for 5 seconds.

11. Power up the TigerStop®.

12. Enter the enable code and press

• The TigerStop® is ready for Printer.

Ṣeto

---

Printer requires TigerTouch to operate.

Follow the included ZD421 Printer Quick Start Guide to learn how to load labels and configure the printer.

When enabled, the printer prints a label for every part in a part list. Configure labels through TigerLink: https://www.tigerstop.com/service-center/

Activate Printer features through the TigerStop® Standard Controller by following these instructions.

Itẹwe Iru

Printer Type tells the TigerStop® which kind of printer is installed and enables printing.

1. Access the Options menu and press repeatedly until reaching the‘PrntType’ screen.
2. Tẹ awọn or bọtini.
3. Enter the password and then press
   • The default password is the serial number.
4. Tẹ awọn or [] soft key to select a printer type.
   • Select 1in, 2in, 3in, or 4in depending on the width of the labels in the printer.

Print Cut

Prints the part length and quantity on the label after every move to position. Adds this information to each label print in a cut list.

1. Access the Options menu and press repeatedly until reaching the‘PrintCut’ screen.
2. Tẹ awọn or [] soft key to select a font size and enable the setting.
   • The font size only affects the part length and quantity information.

Awọn aṣayan:
Standard – Prints the part length and quantity in the default font size.
Paa – Disables the feature.
Tobi – Prints the part length and quantity in a larger font size.

ETO IFỌRỌWỌRỌ

Ọja			Max Fifuye Titari	Agbara ibeere	Wakọ Iru	Yiye	Ipari Ṣiṣẹ
mojuto		TigerSPC	Caliper	2 AA Batiri	N/A	+/- .008” +/- 0.2mm	0'-20' 0m - 6m
		SawGear	Duro Nikan	110 Ọkọ	32mm igbanu Imudara Irin	+/- .008” +/- 0.2mm	8'-20' 2.4m - 6m
		SawGear Fọwọkan	Duro Nikan	110 Ọkọ	32mm igbanu Imudara Irin	+/- .008” +/- 0.2mm	8'-20' 2.4m - 6m
		TigerStop	90lbs / 41kg ri to Tables 180lbs / 81kg Roller Tables	110/240 Vac	32mm igbanu Imudara Irin	+/- .004” +/- 0.1mm	4'-30' 1.2m - 9.1m
		TigerStop Pro	150lbs / 68kg ri to Tables 300lbs / 136kg Roller Tables	120/240 Vac	32mm igbanu Imudara Irin	+/- .004” +/- 0.1mm	4'-30' 1.2m - 9.1m
		TigerFence	Duro Nikan	110/240 Vac	3/4” Hi-Lead dabaru	+/- .003” +/- 0.08mm	51" tabi 70" 1.29m - 1.77m
		TigerRack	300lbs / 136kg ri to Tables 720lbs / 327kg Roller Tables	240 Ọkọ	agbeko & Pinion	+/- .008” +/- 0.2mm	12'-108' 3.7m - 32.9m
		TigerTurbo	350lbs / 159kg ri to Tables 840lbs / 381kg Roller Tables	240 Ọkọ	75mm igbanu Imudara Irin	+/- .008” +/- 0.2mm	12'-42' 3.7m - 12.8m
		Eru Duty 2	490lbs / 222kg ri to Tables 2100lbs / 952kg Roller Tables	240 Ọkọ	agbeko & Pinion	+/- .008” +/- 0.2mm	12'-108' 3.7m - 32.9m
SAW SYSTEMS		TigerSaw Ferrous	490lbs / 222kg ri to Tables 840lbs / 381kg Roller Tables	208/480 Vac	32 tabi 75mm igbanu Imudara Irin	+/- .015” +/- 0.4mm	8'-42' 2.4m - 12.8m
		TigerSaw 2000 Compact	90lbs / 41kg ri to Tables 180lbs / 81kg Roller Tables	208/480 Vac	32mm igbanu Imudara Irin	+/- .015” +/- 0.4mm	4'-30' 1.2m - 9.1m
		TigerSaw 1000 Compact	90lbs / 41kg ri to Tables 180lbs / 81kg Roller Tables	208/480 Vac	32mm igbanu Imudara Irin	+/- .015” +/- 0.4mm	4'-30' 1.2m - 9.1m
		TigerSaw 2000	490lbs / 222kg ri to Tables 2100lbs / 952kg Roller Tables	208/480 Vac	32 tabi 75mm igbanu Steel Reinforced or Rack & Pinion	+/- .012” +/- 0.3mm	8'-108' 2.4m - 32.9m
		TigerSaw 1000	490lbs / 222kg ri to Tables 2100lbs / 952kg Roller Tables	208/480 Vac	32 tabi 75mm igbanu Steel Reinforced or Rack & Pinion	+/- .012” +/- 0.3mm	8'-108' 2.4m - 32.9m
		TigerSaw MiterXL	490lbs / 222kg ri to Tables 2100lbs / 952kg Roller Tables	400 - 480 Vac	32 tabi 75mm igbanu Steel Reinforced or Rack & Pinion	+/- 0.1” +/- .012”	8'-108' 2.4m - 32.9m

TigerStop USA
12909 NE 95th Street
Vancouver, WA 98682
P: 360.254.0661 • F: 360.260.0755

TigerStop Europe
Bedrijvenstraat 17 NL-7641 AM Wierden
Nederland
P: +31.546.57.51.71

• Ṣe ni USA lati abele ati ajeji irinše.
© 1994 – 2024 Precision Automation, Inc. – All Rights Reserved