TrueNAS ES24F Basic Setup

Awọn ibeere ati awọn pato

We recommend these tools when installing a TrueNAS ES24F in a rack:

• # 2 Phillips ori dabaru iwakọ
• Alapin ori dabaru iwakọ
• Iwọn teepu
• Ipele

ES24F Specifications
Awọn iwọn (H x W x L)	3.5 in x 19 in x 20.5 in     (89 mm x 482.6 mm x 520.7 mm)
Length with Chassis Rail	24.3 in     (617.22mm)
Àwọ̀n Àpótí (Ti kojọpọ ni kikun)	50 lbs    (23 kg)
Awọn iwọn otutu ti nṣiṣẹ	32°F – 95°F    (0°C – 35°C)
Iwọn otutu ti kii ṣiṣẹ	-4°F – 158°F    (-20°C – 70°C)
Ọriniinitutu ti nṣiṣẹ (ti kii ṣe itọlẹ)	5% - 95%
Ipese Voltage	100-127~/7A     50-60 Hz or 200-240V~,3.5A      50-60 Hz

Ọrọ Iṣaaju

The TrueNAS ES24F is a 2U expansion shelf with 24 2.5” drive bays, SAS3 (12 Gb/s), dual expansion controllers, and redundant power supplies.
Review the safety considerations and hardware requirements before installing an ES24 into a rack.

Aabo

Yiyọ Aimi

Ìkìlọ̀ – Ìtújáde Electrostatic (ESD)
Ina aimi le kọ soke ninu ara rẹ ati idasilẹ nigbati o kan awọn ohun elo adaṣe. Electrostatic Discharge (ESD) jẹ ipalara si awọn ẹrọ itanna eletiriki ati awọn paati. Jeki awọn iṣeduro aabo wọnyi ni ọkan ṣaaju ṣiṣi ọran eto tabi mimu awọn paati eto ti kii gbona-swappable mu.

• Pa eto naa kuro ki o yọ awọn kebulu agbara kuro ṣaaju ṣiṣi ọran tabi fọwọkan awọn paati inu.
• Gbe awọn eto lori kan mọ, lile iṣẹ dada bi a onigi tabletop. Lo akete dissipative ESD ti o ba ṣeeṣe lati daabobo awọn paati inu.
• Fọwọkan chassis irin pẹlu ọwọ igboro lati tu ina ina aimi sinu ara rẹ ṣaaju mimu eyikeyi awọn paati inu, pẹlu awọn paati ti a ko ti fi sii ninu eto naa. A ṣeduro nigbagbogbo wọ ẹwu-ọwọ anti-aimi ati lilo okun ti ilẹ.
• Tọju gbogbo awọn paati eto sinu awọn apo anti-aimi.

Mimu awọn System
A ṣeduro o kere ju eniyan meji gbe eto TrueNAS kan.

Ikilo
Never attempt to lift a TrueNAS system loaded with drives! Install the system in a rack before adding drives. Remove drives before unracking the system.

Mu eto naa lati awọn ẹgbẹ tabi isalẹ nigbakugba ti o ṣeeṣe. Nigbagbogbo ṣe akiyesi awọn okun tabi awọn asopọ ti alaimuṣinṣin ki o yago fun fun pọ tabi bumping awọn eroja wọnyi nigbakugba ti o ṣee ṣe.
Iwe yii nlo “osi” ati “ọtun” ni ibamu si irisi rẹ nigbati o ba dojukọ iwaju eto tabi agbeko.

The TrueNAS ES24F is a network storage server intended for use in enterprise and datacenter environments.

The apparatus is designed to be operated:

• In controlled IT environments, within the specified ranges for temperature, humidity, and supply voltage
• In properly grounded electrical installations, in accordance with local electrical codes
• In accordance with the TrueNAS software documentation, including configuration, operation, and maintenance instructions

This product is not designed or intended for:

• Use in life-support systems or other safety-critical applications where failure could result in injury or loss of life
• Use in residential consumer environments, unless explicitly installed and operated in a controlled, non-domestic IT setting.
• Any application outside the conditions and purposes described in this manual and the TrueNAS software documentation

For detailed configuration and operational guidance, refer to the TrueNAS software documentation provided with the product and available from TrueNAS.

The ES24F is FCC/CE-marked and complies with:

• FCC 47 CFR Part 15, Class A – Radiated and conducted emissions limits for commercial IT equipment (EMI/EMC)
• Kekere Voltage Directive (LVD) 2014/35/EU – Electrical safety
• Electromagnetic Compatibility (EMC) Directive 2014/30/EU – Electromagnetic interference and immunity
• RoHS Directive 2011/65/EU, as amended by (EU) 2015/863 – Restriction of hazardous substances
• WEEE Directive 2012/19/EU – Waste electrical and electronic equipment

For regulatory or compliance-related queries, contact compliance@truenas.com.

Aṣoju Aṣẹ EU: Obelis S.A. – Boulevard Général Wahis 53, B-1030 Brussels, BELGIUM

Important – Battery Information

This product contains a lithium coin cell (CMOS battery) used to maintain system settings. Do not dispose of the battery with household waste. Used batteries must be collected and disposed of separately in accordance with local regulations and the EU Battery Directive 2006/66/EC. The crossed-out wheeled bin symbol indicates that the battery must be taken to an appropriate collection facility for recycling.

ES24F Components

• Awọn ẹya TrueNAS ti wa ni iṣọra ati firanṣẹ pẹlu awọn gbigbe ti o ni igbẹkẹle lati de ni ipo pipe.
• If there is any shipping damage or missing parts, please take photos and contact TrueNAS Support immediately at support@truenas.com, 1-855-GREP4-iX (1-855-473-7449), tabi 1-408-943-4100.
• Jọwọ wa ati ṣe igbasilẹ awọn nọmba ni tẹlentẹle ohun elo lori ẹhin ẹnjini kọọkan fun itọkasi ni iyara.

Ṣọra awọn apoti gbigbe ati wa awọn paati wọnyi:

Awọn Atọka Iwaju
The ES24F has buttons/lights for power, alarm mute, locate ID, and fault. The fault light activates during the initial power-on self-test (POST) or when the TrueNAS software generates an alert.

Ru irinše ati Ports

Rack the System
The ES24F requires an EIA-310 compliant rack. To properly install the rack rails, the vertical rack posts need to be spaced between 23” – 35.75” (584mm-908mm) apart.

Fi sori ẹrọ awọn afowodimu ẹnjini
Each rail has two components, the outer rack rail and the inner chassis rail. To protect it during shipping, the chassis rail is inserted into the rack rail and must be removed before attaching to a system. Slide the chassis rail forward until the metal catch stops it in place. Push in the catch and continue to slide the chassis rail forward until it is free of the rack rail.

Align the chassis rail end stamped “FRONT” with the front of the ES24F. Fit the rail keyholes over the system mounting pegs and slide it into place. Use one of the included short M4 screws to secure the rail to the system.

Repeat this procedure to attach the second chassis rail to the other side of the system.

Fi sori ẹrọ Rack Rails

• Ensure the rack has enough space for the system. The ES24F needs 2U of space for both the system and rack rails. The rack rails install into the bottom 1U of the reserved space.
• Align the rail end stamped “FRONT” with the front of the rack. Face the “FRONT” text inside the rack so the chassis rails can slide into the rack rails. Align the rail front pegs with the top and bottom holes in the bottom 1U and push the rail into the holes until the spring latch locks the rail in place.

The rail kit includes two optional retention screw hole extenders that you can screw into the middle rail attach point.

After you install the front of the rail, extend the back of the rack rail towards the equivalent attach points on the rear rack post. Make sure the rail remains level from front to back. Repeat this process to install the other rack rail.

Gbe awọn System ni agbeko

Ikilo
The ES24F requires two people to safely lift in and out of a rack. Do not install drives until after you mount the ES24F in the rack. Remove all drives before taking the ES24F out of the rack.

Align the chassis rails with the rack rails. Slide the ends of the chassis rails into the rack rails and push the system forward until the metal safety catches click into place. Squeeze the safety catches against the sides of the system and slide the ES24F into the rack.

Ohun elo iṣinipopada pẹlu awọn skru M4 afikun ti o le ṣee lo lati ni aabo eto naa si awọn afowodimu agbeko.

Fi Awakọ sii

• TrueNAS appliances only support qualified hard drives and SSDs. Contact the Sales Team if you need more drives or replacements. Adding unqualified drives to the system voids the warranty. Call Support if drives are improperly installed in trays.
• To insert a drive in a tray, face the drive connectors toward the rear of the tray and align the side screw holes with the tray retention pegs. Push the drive side screw holes into the fixed retention pegs. Then, push the drive into the flexible retention pegs until it clicks.
• To remove a drive, push on the drive from the bottom of the tray to pop it out from the flexible retention pegs.

• If you purchased fewer than 24 drives with the system, the system has air baffles installed in all remaining drive tray slots. To install new drive trays in the system, remove a baffle by inserting a flathead screwdriver in the baffle grooves, then gently push the baffle out. For proper airflow, we recommend you keep all baffles in place unless you are installing new drives.
• Each drive tray has two indicator lights for status and fault. The status light is blue when the drive is active or a hot spare. The fault light is solid red when the drive has an error or an active identify command.
• Press the button on the drive tray to open the latch. Carefully slide the tray into a drive bay until the latch begins to close. Gently push the latch closed until it clicks into place in the chassis.
• To remove a drive tray, press the button to open the latch, then gently swing the latch open and pull the tray out.

So Power Cables

• Ma ṣe pulọọgi awọn okun agbara sinu iṣan agbara sibẹsibẹ. So okun agbara pọ si ẹhin ipese agbara kan. Gbe okun ni ike clamp ki o si tẹ taabu naa sinu latch lati tii si aaye. Tun ilana naa ṣe fun ipese agbara keji ati okun.

Program Power Loss Mode

The ES24F can be programmed to automatically restart if the power input has been lost and subsequently restored. By default, if the ES24F loses power, it does not automatically start when power is restored. You must press the power button to turn the system on. However, you can set the ES24F to restart automatically when power is restored to the system.

To activate this mode, quickly press the power button three times.

The power button blinks to indicate the current mode. When it blinks quickly, the system automatically starts when power is restored. When the button blinks slowly, you must manually power on the system after a power loss. To test the current setting, disconnect the power, wait a few moments, and plug the system back in.

Imugboroosi ipamọ

• Plug the ES24F power cords into power outlets. Wait two minutes for the drives to start.
• To set up SAS between your TrueNAS system and expansion shelves, cable the first port on the first TrueNAS controller to the first port on the first expansion shelf IOM/expander. High
• Availability (HA) systems require another cable from the first port on the second TrueNAS controller to the first port on the second expansion shelf controller.
• A ko ṣeduro awọn atunto cabling miiran. Kan si iX Support ti o ba nilo awọn ọna cabling miiran.
• Ti eto TrueNAS rẹ ba ni HA, atunbere tabi ikuna lẹhin sisopọ awọn kebulu SAS lati mu awọn awakọ ṣiṣẹpọ laarin awọn oludari.

Pataki

• Nigbati o ba ṣeto awọn asopọ SAS, jọwọ tẹramọ si wiwiri example isalẹ.
• Connecting expansion shelves incorrectly causes errors. Never cable a single controller to different expanders on the same shelf.

X-jara

• X-Series with a single ES24F Expansion Shelf
• X-Series with two ES24F Expansion Shelves

R-jara

R20

• R20 with a single ES24F Expansion Shelf
• R20 with two ES24F Expansion Shelves

R40

• R40 with a single ES24F Expansion Shelf
• R40 with two ES24F Expansion Shelves

M-jara

M40

• M40 with a single ES24F Expansion Shelf
• M40 with two ES24F Expansion Shelves

M50 ati M60

• M50/M60 with a single ES24F Expansion Shelf
• M50/M60 with three ES24F Expansion Shelves. The M50 can support up to 8 total Expansion Shelves with the use of additional SAS cards. The M60 can support up to 12 total Expansion Shelves with the use of additional SAS cards.

Afikun Resources

Ibudo Iwe Iwe TrueNAS ni iṣeto sọfitiwia pipe ati awọn ilana lilo. Tẹ Itọsọna ni TrueNAS web ni wiwo tabi lọ taara si: https://www.truenas.com/docs.

• Awọn itọsọna ohun elo afikun ati awọn nkan wa ni apakan Hardware Hub Hub: https://www.truenas.com/docs/hardware.2
• Awọn apejọ TrueNAS pese awọn aye lati ṣe ajọṣepọ pẹlu awọn olumulo TrueNAS miiran ati jiroro awọn atunto wọn: https://forums.truenas.com/3

Olubasọrọ iXsystems

Having issues? Please contact TrueNAS Enterprise Support to ensure a smooth resolution.

Kan si Ọna	Awọn aṣayan Olubasọrọ
Web	https://www.truenas.com/support 4
Imeeli	support@truenas.com
Tẹlifoonu	Monday-Friday, 6:00 AM to 6:00 PM Pacific Standard Time: • US-nikan-ọfẹ: 1-855-473-7449 aṣayan 2 • Agbegbe ati ti ilu okeere: 1-408-943-4100 aṣayan 2
Tẹlifoonu	Tẹlifoonu Lẹhin Awọn wakati ( Atilẹyin Ipele goolu 24×7 nikan): • US-nikan-ọfẹ: 1-855-499-5131 • International: 1-408-878-3140 (Awọn oṣuwọn pipe ti kariaye yoo waye)
Adirẹsi	iXsystems, Inc. dba TrueNAS – 541 Division St, CampBelii, CA 95008, USA

Awọn iwe aṣẹ / Awọn orisun

TrueNAS ES24F Basic Setup [pdf] Itọsọna olumulo ES24F Basic Setup, ES24F, Basic Setup, Setup

Awọn itọkasi

• Itọsọna olumulo