User Manual for HMF 49203-11 Furniture Safe

1. Ọja Ipariview

The HMF 49203-11 Furniture Safe is designed to provide secure storage for your valuables at home or in the office. This robust safe features a solid single-walled steel body and door, equipped with a high-security double-bit lock. Its compact design allows for discreet placement within furniture or direct mounting to a wall or floor.

Figure 1: The HMF 49203-11 Furniture Safe with its door open, showing the interior and the double-bit key inserted into the lock.

Awọn ẹya pataki pẹlu:

• High-security double-bit lock with double bolt locking mechanism.
• Solid single-walled steel body and door, with a 4mm door thickness.
• Pre-drilled holes for secure wall or floor mounting.
• Right-hand door hinge with concealed hinges for enhanced security.
• Compact dimensions suitable for furniture integration.

2. Awọn ilana aabo

Please read and understand all safety instructions before installing and operating your safe. Failure to follow these instructions may result in injury or damage to the safe or its contents.

• Always keep the keys in a secure location away from the safe and out of reach of unauthorized persons.
• Do not store the keys inside the safe.
• Rii daju pe ailewu ti gbe sori ogiri tabi ilẹ lati ṣe idiwọ yiyọkuro laigba aṣẹ.
• Avoid placing the safe in areas with extreme temperatures or high humidity.
• Do not attempt to force the lock if the key does not turn smoothly.
• Keep children away from the safe and its keys.

3. Package Awọn akoonu

Daju pe gbogbo awọn nkan ti a ṣe akojọ rẹ si isalẹ wa ninu package rẹ:

• 1 x HMF Furniture Safe
• 2 x Double-bit Keys
• 4 x Fixing skru
• 4 x Wall Plugs (Anchors)
• 1 x Shelf (removable)

4. Eto ati fifi sori

For optimal security, it is highly recommended to securely fix the safe to a wall or floor using the provided mounting hardware.

4.1 Yiyan ipo kan

Select a discreet and secure location for your safe. Ensure the surface (wall or floor) is strong enough to support the weight of the safe and its contents.

4.2 iṣagbesori Awọn ilana

1. Samisi Awọn aaye Liluho: Place the safe in the desired mounting position. Using a pencil, mark the locations of the pre-drilled holes on the back or bottom of the safe onto the wall or floor.


olusin 2: Ẹyìn view of the safe, highlighting the pre-drilled holes for secure mounting.

2. Awọn iho iho: Using an appropriate drill bit for your wall/floor material, drill holes at the marked points. Ensure the depth and diameter of the holes match the provided wall plugs.
3. Fi awọn Plugs Odi sii: Insert the wall plugs into the drilled holes. Tap them gently with a hammer until they are flush with the surface.
4. Ṣe aabo fun ibi aabo naa: Align the safe's holes with the installed wall plugs. Insert the fixing screws through the safe's holes and tighten them firmly into the wall plugs using a suitable screwdriver or wrench.

Figure 3: The HMF safe securely installed on a wall, demonstrating a typical mounting scenario.
5. Iduroṣinṣin Idanwo: After tightening, gently try to move the safe to ensure it is securely fixed and cannot be easily dislodged.

5. Awọn ilana Iṣiṣẹ

Your HMF safe operates with a traditional double-bit key lock, providing reliable security.

5.1 Nsii Ailewu naa

1. Insert one of the provided double-bit keys into the keyhole on the safe door.

olusin 4: A alaye view of the double-bit key properly inserted into the safe's lock mechanism.
2. Turn the key clockwise (or counter-clockwise, depending on the specific lock mechanism) until you hear the locking bolts retract.
3. Fa ẹnu-ọna ṣii.


Figure 5: The safe door is fully open, revealing the interior compartment and the key still in the lock.

5.2 Tilekun ati Titiipa Ailewu naa

1. Ensure the door is fully closed and flush with the safe body.

Figure 6: The safe door is securely closed and locked, presenting a flush exterior.
2. Insert the key into the keyhole (if not already there) and turn it counter-clockwise (or clockwise) until the locking bolts extend and the door is secured.
3. Remove the key and store it in a safe, separate location.

6. Itọju

Regular maintenance will ensure the longevity and proper functioning of your HMF safe.

• Ninu: Mu ese ita ti ailewu pẹlu asọ, damp asọ. Yago fun lilo abrasive afọmọ tabi olomi ti o le ba awọn ipari.
• Titiipa Mechanism: Periodically apply a small amount of graphite powder or a non-greasy lubricant to the keyhole to ensure smooth operation of the lock. Do not use oil-based lubricants.
• Awọn isunmọ: Check the door hinges for any signs of wear or looseness. Tighten screws if necessary.
• Abojuto bọtini: Handle the keys with care. Avoid bending or damaging them. If a key is damaged, contact HMF support for assistance.

7. Laasigbotitusita

If you encounter any issues with your HMF safe, refer to the following common problems and solutions:

If the problem persists, please contact HMF customer support.

8. Awọn pato

9. Atilẹyin ọja ati Support

HMF products are manufactured to high-quality standards. For information regarding warranty coverage and terms, please refer to the documentation provided with your purchase or visit the official HMF webojula.

For technical support, spare parts, or any other inquiries, please contact HMF customer service. You can find contact information on the HMF Brand Store on Amazon or through their official webojula.